rockbox/firmware
Rob Purchase ed95be983c D2: Editing config.h wasn't enough to fully disable IRAM - also disable it in *.lds for a crash fix and further 100% increase in codec performance.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17779 a1c6a512-1295-4272-9138-f99709370657
2008-06-24 07:38:35 +00:00
..
common Check for a supported partition type before trying to mount a partition. This will reduce the risk of irregular mounts, e.g. due to stray FAT boot sectors when probing the logical sector size on iPod Video. 2008-05-15 22:23:14 +00:00
decompressor Removed executable flag 2007-01-09 23:29:07 +00:00
drivers FS#9051 - remove LCD margins... use viewports if you need them... 2008-06-23 13:20:35 +00:00
export Disable IRAM usage on TCC780x, giving at least a 2x speedup in codecs and elsewhere. To be re-instated only when the issue is fully understood. 2008-06-23 22:25:33 +00:00
include Convert the whole codebase to UTF-8, except docs/COMMITTERS and tools/creative.c, which need checking. 2008-05-05 10:32:46 +00:00
target D2: Editing config.h wasn't enough to fully disable IRAM - also disable it in *.lds for a crash fix and further 100% increase in codec performance. 2008-06-24 07:38:35 +00:00
test Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled). 2008-03-26 01:50:41 +00:00
usbstack add usb_allowed_current() function, so powermanagement code can know when it's allowed to charge from usb 2008-06-04 18:55:58 +00:00
arabjoin.c
arabjoin.h
ata_idle_notify.c It makes more sense for the callback registrar to decide if its a "oneshot" then the callback caller. 2008-03-17 05:22:53 +00:00
backlight.c Oops. Left a couple things in a bad state when using fading. 2008-05-14 21:29:43 +00:00
bidi.c Made source files #include the header file that they implement to make sure they are in sync. Made some local functions static. 2008-05-03 08:35:14 +00:00
buffer.c New scheduler, with priorities for swcodec platforms. Frequent task 2006-09-16 16:18:11 +00:00
COPYING
debug.c Made source files #include the header file that they implement to make sure they are in sync. Made some local functions static. 2008-05-03 08:35:14 +00:00
eeprom_settings.c Prepare core support for the iriver bootloader supporting ROM images 2007-01-12 18:34:00 +00:00
enc_base.c Recording: Add AIFF recording to SWCODEC. Note: AIFF playback chokes on sample rates other than 44.1kHz whether recorded or created and saved with an external program. Recorded files will still open in an external editor however. 2006-11-24 19:49:04 +00:00
events.c Increased MAX_SYS_EVENTS from 10 to 16, since there are potentially more than 10 events that can registered. Should fix FS#9039 - *PANIC* event line full (reproduceable). 2008-05-26 06:54:57 +00:00
font.c Killed unnecessary global variables by making them static. 2008-04-20 10:24:15 +00:00
font_cache.c Make a couple of private functions static 2008-04-12 17:08:35 +00:00
general.c mpegplayer: Make playback engine fully seekable and frame-accurate and split into logical parts. Be sure to have all current features work. Actual UI for seeking will be added soon. Recommended GOP size is about 15-30 frames depending on target or seeking can be slow with really long GOPs (nature of MPEG video). More refined encoding recommendations for a particular player should be posted soon. 2007-12-29 19:46:35 +00:00
hangul.c Add support for loadable vkeyboard layouts 2006-03-29 16:21:42 +00:00
hotswap.c Hotswap code shuffling: Fix yellow. Simplify some target function access. Keep fat lock access from compiling for Ondios - think of a nicer way later. 2008-03-12 11:08:41 +00:00
id3.c FS #8680. MOD codec by Rainer Sinsch. 2008-05-21 11:19:58 +00:00
ifp_usb_serial.c move the ifp7xx usb serial driver files to more specific names, to make the "usb_serial" name available for more general usb class driver use 2008-03-02 18:16:24 +00:00
kernel.c 1) Use a separate config-<target>.h for Zen Vision(:M) (60GB) 2008-05-14 18:55:19 +00:00
logf.c FS#9051 - remove LCD margins... use viewports if you need them... 2008-06-23 13:20:35 +00:00
lru.c
Makefile Prevent sysfont.h being regenerated during every build. 2007-01-18 00:46:52 +00:00
mp3_playback.c Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled). 2008-03-26 01:50:41 +00:00
mp3data.c Convert the whole codebase to UTF-8, except docs/COMMITTERS and tools/creative.c, which need checking. 2008-05-05 10:32:46 +00:00
mpeg.c Fix red (missing header file) 2008-04-27 20:09:45 +00:00
panic.c D2: Stop panic screen from crashing instantly (seems this has been broken for a while). 2008-05-31 11:30:24 +00:00
pcm.c Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit). 2008-04-06 04:34:57 +00:00
pcm_record.c Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit). 2008-04-06 04:34:57 +00:00
pcm_sampr.c Forgot to use cvs add on a few new files in the fresh checkout I used. woops. 2006-11-06 18:18:05 +00:00
powermgmt.c Get a good start on cleaning up powermgmt.c 2008-05-19 03:59:52 +00:00
profile.c Moved private types and constants from profile.h to profile.c 2008-04-28 18:41:13 +00:00
README
replaygain.c Made source files #include the header file that they implement to make sure they are in sync. Made some local functions static. 2008-05-03 08:35:14 +00:00
rolo.c Oops. Lost sync on a few instances and 'HI' registers. 2008-06-03 05:19:32 +00:00
rom.lds Make sure the linker considers crt0*.o before all files specified on the command line by using STARTUP() instead of INPUT() in the .lds. Using INPUT() makes the linker process crt0*.o after all files specified on the command line, making linking fail if there are librockbox.a members which are only referenced by crt0*.o. Remove the hackaround that was needed for building the gigabeat S bootloader before (aka UIE() problem). 2008-04-29 06:19:32 +00:00
scroll_engine.c Killed unnecessary global variables by making them static. 2008-04-20 10:24:15 +00:00
sound.c Initial D2 sound playback support (known issues to follow on the CowonD2Info wiki page). 2008-06-22 18:48:22 +00:00
SOURCES Initial D2 sound playback support (known issues to follow on the CowonD2Info wiki page). 2008-06-22 18:48:22 +00:00
system.c Make sure the linker considers crt0*.o before all files specified on the command line by using STARTUP() instead of INPUT() in the .lds. Using INPUT() makes the linker process crt0*.o after all files specified on the command line, making linking fail if there are librockbox.a members which are only referenced by crt0*.o. Remove the hackaround that was needed for building the gigabeat S bootloader before (aka UIE() problem). 2008-04-29 06:19:32 +00:00
thread.c Reinstate the awful ATA hack that has no proper reason to exist for iPod 5.5g 60GB and/or 80GB. 2008-06-03 04:23:09 +00:00
timer.c Rename CPU/COP_INT_CLR to CPU/COP_INT_DIS since it's really a 'write one to disable' register and hasn't anything to do with acknowledging interrupts-- that's handled at the module level. 2008-06-03 05:08:24 +00:00
tuner.c e200: Tuner driver needs to yield alot and also be mutexed. FM debug screen got broken again and was ignoring cancellation and not drawing the lines. 2007-07-14 22:00:50 +00:00
usb.c 1) Use a separate config-<target>.h for Zen Vision(:M) (60GB) 2008-05-14 18:55:19 +00:00

See docs/README