| .. |
|
sansa-c200v2
|
Implement software pwm to control c200v2 display brightness.
|
2010-03-23 05:27:32 +00:00 |
|
sansa-clip
|
lcd-ssd1303 (all Clips) : move model specific code in their own files
|
2010-03-19 15:13:29 +00:00 |
|
sansa-clipplus
|
lcd-ssd1303 (all Clips) : move model specific code in their own files
|
2010-03-19 15:13:29 +00:00 |
|
sansa-clipv2
|
lcd-ssd1303 (all Clips) : move model specific code in their own files
|
2010-03-19 15:13:29 +00:00 |
|
sansa-e200v2
|
Update on even pixel boundaries on the e200v2 for best performance (was forgotten in r24198).
|
2010-01-26 21:31:53 +00:00 |
|
sansa-fuze
|
Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now).
|
2010-01-07 22:21:41 +00:00 |
|
sansa-fuzev2
|
Fuzev2: fix build, use suited bitmap tool
|
2010-03-26 11:41:15 +00:00 |
|
sansa-m200v4
|
Sansa Clip & m200v4 : calls backlight_hold_changed() when hold button is toggled
|
2009-08-15 15:02:51 +00:00 |
|
adc-target.h
|
|
|
|
app.lds
|
Fix as3525 lowmem targets. They put the init code into the plugin buffer, but some init functions are grabbing it.
|
2010-03-04 12:32:12 +00:00 |
|
ascodec-as3525.c
|
Limit AUDIO_IRQ handling to AS3525, since it doesn't work on the newer SoC in SANSA_CLIPPLUS yet.
|
2010-03-23 11:13:17 +00:00 |
|
ascodec-target.h
|
Limit AUDIO_IRQ handling to AS3525, since it doesn't work on the newer SoC in SANSA_CLIPPLUS yet.
|
2010-03-23 11:13:17 +00:00 |
|
audio-as3525.c
|
as3525: do not assume we can record from microphone
|
2010-03-15 01:00:00 +00:00 |
|
backlight-e200v2-fuze.c
|
|
|
|
boot.lds
|
Fix a bunch of boot.lds files so that they build with newer ld. The stack/bss sections need NOLOAD. otherwise the linker would try to include those into the binary. I don't know why this ever worked with our current ld version.
|
2010-03-08 23:16:57 +00:00 |
|
button-e200v2-fuze.c
|
Add Sansa Fuzev2 to the target tree. Bootloader builds, but is completely untested.
|
2010-02-25 13:26:46 +00:00 |
|
clock-target.h
|
SansaAMSv2: Give register CGU_BASE + 0x3C the name CGU_SDSLOT.
|
2010-03-23 17:00:59 +00:00 |
|
dbop-as3525.c
|
Add Sansa Fuzev2 to the target tree. Bootloader builds, but is completely untested.
|
2010-02-25 13:26:46 +00:00 |
|
dbop-as3525.h
|
Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now).
|
2010-01-07 22:21:41 +00:00 |
|
debug-as3525.c
|
SansaAMSv2: Give register CGU_BASE + 0x3C the name CGU_SDSLOT.
|
2010-03-23 17:00:59 +00:00 |
|
debug-target.h
|
|
|
|
dma-pl081.c
|
Sansa AMS: VIC_INT_ENABLE register is not a mask
|
2009-11-24 12:05:53 +00:00 |
|
dma-target.h
|
Add DMA line for SSP as used in Clip+
|
2010-02-08 08:13:52 +00:00 |
|
fmradio-i2c-as3525.c
|
Clip+: si4702 FM
|
2010-03-15 00:36:13 +00:00 |
|
i2s-as3525.c
|
|
|
|
kernel-as3525.c
|
Implement software pwm to control c200v2 display brightness.
|
2010-03-23 05:27:32 +00:00 |
|
lcd-as-e200v2-fuze.S
|
Sansa e200v2/Fuze: Optimize YUV blitting by writing 2 pixel at once to the DBOP and removing a few unneeded busy polling status register for fifo empty. Speed up between 50% and 80%.
|
2010-01-08 16:41:36 +00:00 |
|
lcd-ssd1303.c
|
lcd-ssd1303 (all Clips) : move model specific code in their own files
|
2010-03-19 15:13:29 +00:00 |
|
pcm-as3525.c
|
Sansa AMS: allow use of PLL B for more accurate audio sample rate (0.04% instead 0.15% error)
|
2010-01-10 14:24:45 +00:00 |
|
power-as3525.c
|
Sansa AMS: do not pretend we can power off the tuner
|
2010-03-05 01:43:47 +00:00 |
|
powermgmt-as3525.c
|
|
|
|
powermgmt-target.h
|
Clip+: fix battery voltage reading when charging : use ADC_RTCSUP like e200v1
|
2010-03-26 07:11:03 +00:00 |
|
sd-as3525.c
|
sd-as3525: do not reverse 2 times long responses, read them directly in the needed order
|
2010-03-14 21:46:25 +00:00 |
|
sd-as3525v2.c
|
sd-as3525v2.c Implement HS timings for those cards that are capable.
|
2010-03-24 05:41:33 +00:00 |
|
system-as3525.c
|
Add handler for audio irq.
|
2010-03-23 05:02:37 +00:00 |
|
system-target.h
|
ARM922T's icache isn't coherent with its dcache, so we need to ensure that its flushed before changing codecs. Playback takes care of this for us, but only if we define cache coherency functions. Do that. Also, add a comment explaining that MMU functions need to be included so that other people don't spend hours chasing them in the future.
|
2009-07-05 01:17:25 +00:00 |
|
timer-as3525.c
|
Sansa AMS: VIC_INT_ENABLE register is not a mask
|
2009-11-24 12:05:53 +00:00 |
|
usb-as3525.c
|
No intentional warnings.
|
2010-03-23 13:21:19 +00:00 |
|
usb-drv-as3525.c
|
Clip+: enable sound on "as3514" (as3543 in fact)
|
2010-03-20 17:09:44 +00:00 |
|
usb-target.h
|
Limit AUDIO_IRQ handling to AS3525, since it doesn't work on the newer SoC in SANSA_CLIPPLUS yet.
|
2010-03-23 11:13:17 +00:00 |
d3312b7f16