..
config
Rockbox as an application: Add an 320x240 SDL application target.
2010-07-06 15:11:56 +00:00
adc.h
FS#10756 - Free unused init code
2010-03-03 23:20:32 +00:00
ak4537.h
akcodec.h
as3514.h
e200v1/c200v1: Implement limited samplerate switching. Rates 24kHz and below are being a bear as far as minor crackling at higher amplitude-- leave them out for the time being since no solution is currently evident. 48, 44, 32 (rec rates 24, 22, 16) seem perfectly fine. I'm betting c200 is ok to include because it uses the same setup as e200.
2010-06-26 10:07:17 +00:00
as3525.h
as3525*: enable MMU in bootloader
2010-06-18 17:33:51 +00:00
as3525v2.h
as3525v2-usb: define number of enpoints correctly, write interrupt handler
2010-06-23 22:03:31 +00:00
ascodec.h
at91sam9260.h
ata.h
ata_idle_notify.h
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
2010-06-21 16:53:00 +00:00
ata_mmc.h
audio.h
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
2010-06-21 16:53:00 +00:00
audiohw.h
Rockbox as an application: Add an 320x240 SDL application target.
2010-07-06 15:11:56 +00:00
backlight-sw-fading.h
backlight.h
FS#10756 - Free unused init code
2010-03-03 23:20:32 +00:00
bidi.h
bitswap.h
bootchart.h
Boot charting support.
2010-04-01 16:27:21 +00:00
buffer.h
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
2010-06-21 16:53:00 +00:00
button.h
FS#10756 - Free unused init code
2010-03-03 23:20:32 +00:00
config.h
Rockbox as an application: Add an 320x240 SDL application target.
2010-07-06 15:11:56 +00:00
config_caps.h
cpu.h
FS#10047 : Clipv2
2009-12-31 19:15:20 +00:00
debug.h
don't let logf() and DEBUGF() be empty statements
2010-05-18 18:32:21 +00:00
disk.h
Make disk_init() non-static again. I forgot to look at the bootloaders
2010-06-06 13:28:13 +00:00
dm320.h
ds2411.h
eeprom_24cxx.h
eeprom_settings.h
enc_base.h
events.h
FS#11263 - Radio Art support! %C and %Cl tags work in the radio screen and Base Skin when the radio is running.
2010-05-16 11:13:42 +00:00
fat.h
FS#11118: reduce the number of cached sector in FAT code because some are useless after a rewrite of LFN entries handling. Also makes LFN handling more robust.
2010-03-22 10:35:25 +00:00
filefuncs.h
Move strip_volume() to filefuncs.c and set properties.
2009-11-26 22:34:08 +00:00
fmradio.h
fmradio_i2c.h
mark some functions as init functions (discarded after init() has run)
2010-05-27 12:00:29 +00:00
font.h
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
2010-06-21 16:53:00 +00:00
gdb_api.h
general.h
Simplify mpegplayer a bit and use array-based lists rather than linked lists for stream management. Move a couple useful functions to handle pointer arrays from kernel.c into general.c; mpeglayer now makes use of them.
2010-05-17 12:34:05 +00:00
generic_i2c.h
Apply FS #11423 - Use udelay in AMS driver for FM radio I2C
2010-06-21 21:41:07 +00:00
hangul.h
hd66789r.h
hwcompat.h
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
2010-06-21 16:53:00 +00:00
i2c-coldfire.h
Fix more tabs
2010-01-03 10:27:43 +00:00
i2c-pp.h
i2c-s5l8700.h
i2c.h
i2s.h
iap.h
Clean up IAP / ipod remote tuner a bit.
2010-04-18 15:46:56 +00:00
ifp_usb_serial.h
imx31l.h
Gigabeat S: Implement LCD contrast, invert and flip modes. Enhance LCD power management. Include init data but it's not needed yet (identical to Gigabeat F).
2010-05-18 23:50:00 +00:00
ipod_remote_tuner.h
Add support for the ipod FM remote to the 4G, Color, 5G, nano 1G with RDS
2009-12-01 17:54:40 +00:00
isp1362.h
isp1583.h
jz4740-codec.h
jz4740.h
jz_mxu.h
kernel.h
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
2010-06-21 16:53:00 +00:00
lcd-charcell.h
lcd-remote.h
lcd.h
FS#10756 - Free unused init code
2010-03-03 23:20:32 +00:00
led.h
logf.h
don't let logf() and DEBUGF() be empty statements
2010-05-18 18:32:21 +00:00
ltv350qv.h
lv24020lp.h
m5636.h
m66591.h
mas.h
Fix more tabs
2010-01-03 10:27:43 +00:00
mas35xx.h
mc13783.h
i.MX31/Gigabeat S: Actually enable DPTC which can set optimal voltage for 528MHz. Requires an SPI and PMIC interface rework because of the low-latency needs for the DPTC to work best with minimal panicing. SPI can work with multitasking and asynchronously from interrupt handlers or normal code.
2010-05-04 10:07:53 +00:00
mcf5249.h
mcf5250.h
mips-archdefs.h
mips.h
mipsregs.h
mmc.h
mp3_playback.h
mv.h
nand.h
nand_id.h
ohci.h
panic.h
pcf5060x.h
pcf5063x.h
pcf50605.h
pcf50606.h
pcf50635.h
pcm.h
e200v1/c200v1: Implement limited samplerate switching. Rates 24kHz and below are being a bear as far as minor crackling at higher amplitude-- leave them out for the time being since no solution is currently evident. 48, 44, 32 (rec rates 24, 22, 16) seem perfectly fine. I'm betting c200 is ok to include because it uses the same setup as e200.
2010-06-26 10:07:17 +00:00
pcm_sampr.h
Should clear up rest of red. Add a required #define in the config for c200. Fix up some preprocessing directives. Hope it's all taken care of now.
2010-06-26 10:37:41 +00:00
pl081.h
pl180.h
pnx0101.h
power.h
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
2010-06-21 16:53:00 +00:00
powermgmt.h
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
2010-06-21 16:53:00 +00:00
pp5002.h
Move CACHEALIGN_BITS to cpu headers
2010-04-13 15:50:08 +00:00
pp5020.h
Move CACHEALIGN_BITS to cpu headers
2010-04-13 15:50:08 +00:00
pp5024.h
pp6100.h
profile.h
qt1106.h
r61509.h
ramdisk.h
rda5802.h
The mystery FM chip in some Sansa Clip+ players has been identified as a RDA5802, so rename files and functions. Also fix several bugs.
2010-06-16 20:29:08 +00:00
rolo.h
rtc.h
rtc_enable_alarm() needs no return value
2010-05-22 00:28:26 +00:00
s1a0903x01.h
s3c2440.h
s5l870x : use mmu-arm.S
2010-04-13 15:59:49 +00:00
s5l8700.h
Move CACHEALIGN_BITS to cpu headers
2010-04-13 15:50:08 +00:00
screendump.h
scroll_engine.h
FS#10756 - Free unused init code
2010-03-03 23:20:32 +00:00
sd.h
Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix.
2010-06-06 13:20:47 +00:00
sdmmc.h
Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix.
2010-06-06 13:20:47 +00:00
serial.h
sh7034.h
si4700.h
Support for mystery FM chip in some Sansa Clip+, FS #11403 by me
2010-06-15 20:57:48 +00:00
sound.h
Gigabeat S: Fully enable access to hardware tone controls and 3-D effect feature. Under the hood, it's designated a hardware equalizer since it is one. Implement code framework for hardware EQ in general. Menu aspect is well abstracted and so the UI and strings can be changed around if taste doesn't quite suit. So far the emphasis is distinction of the UI labelling from the software EQ so that it's clear the settings are for a different thing.
2010-05-15 13:09:45 +00:00
spdif.h
spi.h
storage.h
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
2010-06-21 16:53:00 +00:00
structec.h
sw_i2c.h
synaptics-mep.h
hdd6330: change the synaptics-mep driver in a few places according to the touchpad behavior.
2010-07-04 12:03:38 +00:00
system.h
Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout.
2010-06-30 02:02:46 +00:00
tcc77x.h
tcc780x.h
tea5760.h
tea5767.h
thread.h
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
2010-06-21 16:53:00 +00:00
timer.h
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
2010-06-21 16:53:00 +00:00
tlv320.h
touchscreen.h
Remove svn:executable from firmware
2009-10-31 02:26:40 +00:00
tsc200x.h
tsc2100.h
tuner.h
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
2010-06-21 16:53:00 +00:00
uda1341.h
Improvements to mini2440/UDA1341 audio
2009-11-01 22:58:08 +00:00
uda1380.h
Fix more tabs
2010-01-03 10:27:43 +00:00
udacodec.h
usb-s3c6400x.h
iPod Nano 2G USB support based on the S3C6400X datasheet. Disabled by default for now.
2009-10-20 06:37:07 +00:00
usb-tcc.h
Fix more tabs
2010-01-03 10:27:43 +00:00
usb.h
New USB charging system, part 2 - "Force" charging mode
2010-06-05 20:43:30 +00:00
usb_ch9.h
Fix more tabs
2010-01-03 10:27:43 +00:00
usb_core.h
New USB charging system, part 1 - API rework and user-visible setting update
2010-06-05 10:05:27 +00:00
usb_drv.h
wm8731.h
wm8751.h
HD200 - Setup codec as I2S master and enable recording
2010-07-02 21:09:28 +00:00
wm8758.h
Submit FS#11065. Introduce a new system setting for en-/disabling the Line-out. For now only implemented on iPod Video. This allows to save power if the user does not use the player's Line-out. On iPod 5G the saving is ~0.5 mA.
2010-03-20 15:02:29 +00:00
wm8975.h
wm8978.h
Gigabeat S: Fully enable access to hardware tone controls and 3-D effect feature. Under the hood, it's designated a hardware equalizer since it is one. Implement code framework for hardware EQ in general. Menu aspect is well abstracted and so the UI and strings can be changed around if taste doesn't quite suit. So far the emphasis is distinction of the UI labelling from the software EQ so that it's clear the settings are for a different thing.
2010-05-15 13:09:45 +00:00
wm8985.h
Submit FS#11240 by Raphael Jakse. Allows to reduce volume on WM8985 to -89 dB (e.g. used for Cowon D2). Below -57 dB the line out is affected. The manual is updated accordingly.
2010-05-30 18:29:04 +00:00
wmcodec.h
31b5c471ae