..
archos /av300
as3525
sd-as3525.c: get rid of MCI_ARG
2010-06-23 13:40:25 +00:00
at91sam
imx31
Configure Gigabeat S with EABI compiler by default. Implement the INIT section that this enables (due to selective need for long calls). Remove pcm_postinit from INIT section since it's asynchronous. Disable strict aliasing on SPC codec for now just to shut it up.
2010-06-11 14:39:35 +00:00
ipod
iPod 3G: Ensure wheel repeats are not generated unless the same keycode is posted more than once in a row, regardless of velocity. Remove 'was_hold' from handle_scroll_wheel calls since the call is never reachable with was_hold being true. Just clear pending ints in one spot after setting levels. Init prev_scroll properly again in 3g case.
2010-06-21 18:47:42 +00:00
iriver
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
olympus
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
pbell
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
philips
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
pnx0101
s3c2440
Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix.
2010-06-06 13:20:47 +00:00
s5l8700
Fix ata_idle_notify on iPod Nano 2G
2010-06-21 16:54:25 +00:00
samsung
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
sandisk
lv24020lp tuner: On PP targets (c200/e200), use the atomic GPIO bitwise macros for the interface since it shares GPIOH with the clickwheel interrupt.
2010-06-22 04:00:34 +00:00
tatung
tcc77x
tcc780x
change the D2 bootloader to boot rockbox by default. boot OF is hold is on or usb is connected
2010-06-21 10:51:39 +00:00
tms320dm320
Make sure files which aren't windows-specific use \n line endings only
2010-06-17 16:59:51 +00:00
adc-as3514.c
adc-pp5020.c
ascodec-pp.c
ascodec-target.h
ata-as-arm.S
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
ata-nand-telechips.c
ata-pp5002.c
ata-pp5020.c
ata-sd-pp.c
Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix.
2010-06-06 13:20:47 +00:00
ata-target.h
audio-pp.c
crt0-pp-bl.S
crt0-pp.S
ARM: use BX when branch to an address in register
2010-05-31 15:14:26 +00:00
crt0.S
arm/crt0.S: comment why the reset vector doesn't use absolute addressing
2010-06-18 18:31:14 +00:00
ffs-arm.S
i2c-pp.c
i2c-telechips.c
Re-write the Telechips I2C delay routine in assembler to stop the compiler optimising it away. Tested with EABI and non-EABI compilers.
2010-06-16 21:03:57 +00:00
i2s-pp.c
kernel-pp.c
lcd-as-memframe.S
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
lcd-c200_c200v2.c
Of course there's no mdelay on c200(v1), so just use udelay
2010-06-19 03:04:22 +00:00
lcd-ssd1815.c
memcpy-arm.S
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
memmove-arm.S
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
memset-arm.S
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
memset16-arm.S
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
mmu-arm.h
mmu-arm.S
Update Samsung YP-S3 bootloader demo
2010-05-30 21:43:14 +00:00
mmu-armv6.S
pcm-pp.c
pcm-pp: revert r26756
2010-06-11 11:25:16 +00:00
pcm-telechips.c
powermgmt-ascodec.c
sd-pp-target.h
support-arm.S
ARM: __div0() takes no argument
2010-06-12 17:15:39 +00:00
system-arm.c
__div0: give the address of the instruction calling division to UIE
2010-06-12 17:15:44 +00:00
system-arm.h
system-pp502x.c
system-pp5002.c
Squeeze down the PP5002 cache routines a bit.
2010-06-18 06:54:58 +00:00
system-target.h
thread-arm.c
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
thread-pp.c
For multiprocessor targets, do the thread_exit routine such that we don't need to rely on the compiler's good graces to have stack switching be reliable. Only needs a few asm instructions.
2010-06-18 03:10:18 +00:00
timer-pp.c
usb-drv-arc.c
usb-fw-pp502x.c
usb-fw-pp5002.c
usb-s3c6400x.c
usb-target.h
usb-tcc.c
wmcodec-pp.c
FS#11417 by Joe Balough: fix audio/tuner on philips hdd6330
2010-06-19 03:51:57 +00:00
wmcodec-telechips.c
cf9bba7102