..
adc.h
ak4537.h
3 new ports: Samsung YH-820, YH-920, and YH-925. Mostly functional. Audio working on 820 & 925 (untested on the 920). No battery readings. No recording. No plugins. Keymap needs work.
2009-05-25 21:10:45 +00:00
akcodec.h
3 new ports: Samsung YH-820, YH-920, and YH-925. Mostly functional. Audio working on 820 & 925 (untested on the 920). No battery readings. No recording. No plugins. Keymap needs work.
2009-05-25 21:10:45 +00:00
as3514.h
FS#9611 - Sansa Clip radio code. Commit final part which enables the LINE2 input that carries the analog radio signal on ams sansas.
2009-02-05 19:57:18 +00:00
as3525.h
Speed up the Fuze's LCD by a factor of ~2.1 (lcd_update()) by using 32bit transfers when possible.
2009-08-31 15:54:25 +00:00
ascodec.h
Oops, fix red - only include ascodec-target.h when HAVE_AS3514 is defined
2008-10-31 00:37:58 +00:00
at91sam9260.h
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
2009-06-29 14:30:12 +00:00
ata.h
Commit FS#9545, storage cleanup and multi-driver support
2009-07-17 22:28:49 +00:00
ata_idle_notify.h
Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*.
2008-11-01 16:14:28 +00:00
ata_mmc.h
Merge tCardInfo struct (MMC) and tSDCardInfo struct (SD)
2009-07-01 10:07:22 +00:00
audio.h
FS9795 - some playback cleanup.
2009-04-06 00:39:43 +00:00
audiohw.h
3 new ports: Samsung YH-820, YH-920, and YH-925. Mostly functional. Audio working on 820 & 925 (untested on the 920). No battery readings. No recording. No plugins. Keymap needs work.
2009-05-25 21:10:45 +00:00
backlight-sw-fading.h
Get rid of the last "backlight thread fading" remnant, and of the calculation of the delay. It actually wasn't more than those 3 cases before anyway.
2009-03-11 21:10:17 +00:00
backlight.h
Remove the calls to backlight_lcd_sleep_countdown from target specific code and move it into backlight.c
2009-04-26 01:23:39 +00:00
bidi.h
bitswap.h
buffer.h
button.h
beginings of a working touchscreen interface for the WPS. 2 new tags:
2009-04-20 01:41:56 +00:00
config-c100.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-c200.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-c200v2.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-clip.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-cowond2.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-creativezv.h
Remove dead or useless defines: HAVE_ONDIO_IC was replaced by CONFIG_I2C but just added not replaced for the OndioFM in errr... r5675. The creativezv* and the m200v4 config files defined CONFIG_I2C twice.
2009-09-19 09:37:14 +00:00
config-creativezvm.h
Remove dead or useless defines: HAVE_ONDIO_IC was replaced by CONFIG_I2C but just added not replaced for the OndioFM in errr... r5675. The creativezv* and the m200v4 config files defined CONFIG_I2C twice.
2009-09-19 09:37:14 +00:00
config-creativezvm60gb.h
Remove dead or useless defines: HAVE_ONDIO_IC was replaced by CONFIG_I2C but just added not replaced for the OndioFM in errr... r5675. The creativezv* and the m200v4 config files defined CONFIG_I2C twice.
2009-09-19 09:37:14 +00:00
config-e200.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-e200v2.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-fmrecorder.h
Move Archos battery runtime estimation defines into config files instead of powermgmt.h. Replace old default values (which were actually the Archos Player currents) with a new default (1mA). This should give nonsense runtime estimates (instead of semi-reasonable but completely wrong estimates) on all players that do not have a battery current defined. Hopefully this will remind people that they should define the battery current when they start a new port.
2009-06-29 18:32:43 +00:00
config-fuze.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-gigabeat-s.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-gigabeat.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-h10.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-h10_5gb.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-h100.h
LCD_DEPTH == 2, vertical packing: specify if lcd framebuffer is in iram into the model specific config file
2009-08-18 04:24:01 +00:00
config-h120.h
LCD_DEPTH == 2, vertical packing: specify if lcd framebuffer is in iram into the model specific config file
2009-08-18 04:24:01 +00:00
config-h300.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-hdd1630.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-iaudio7.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-iaudiom3.h
LCD_DEPTH == 2, vertical interleaved : specify if lcd framebuffer is in iram into the model specific config file
2009-08-18 04:23:53 +00:00
config-iaudiom5.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-iaudiox5.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-ifp7xx.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-ipod1g2g.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-ipod3g.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-ipod4g.h
LCD_DEPTH == 2, horizontal packing: specify if lcd framebuffer is in iram into the model specific config file
2009-08-18 04:23:57 +00:00
config-ipodcolor.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-ipodmini.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-ipodmini2g.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-ipodnano.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-ipodnano2g.h
Add PLL2 definitions for the S5L8701, plus some config file tweaks for the Nano2G
2009-09-17 07:36:09 +00:00
config-ipodvideo.h
Make JPEG and BMP scaler optional with HAVE_JPEG and HAVE_BMP_SCALING, both defined for all targets that have HAVE_ALBUMART. Disable JPEG in PictureFlow and pluginlib album art search with 32KiB plugin buffer until PictureFlow
2009-05-04 15:46:41 +00:00
config-logikdax.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-lyre_proto1.h
Make JPEG and BMP scaler optional with HAVE_JPEG and HAVE_BMP_SCALING, both defined for all targets that have HAVE_ALBUMART. Disable JPEG in PictureFlow and pluginlib album art search with 32KiB plugin buffer until PictureFlow
2009-05-04 15:46:41 +00:00
config-m200.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-m200v4.h
Remove dead or useless defines: HAVE_ONDIO_IC was replaced by CONFIG_I2C but just added not replaced for the OndioFM in errr... r5675. The creativezv* and the m200v4 config files defined CONFIG_I2C twice.
2009-09-19 09:37:14 +00:00
config-meizu-m3.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-meizu-m6sl.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-meizu-m6sp.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-mrobe100.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-mrobe500.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-ondavx747.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-ondavx767.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-ondiofm.h
Remove dead or useless defines: HAVE_ONDIO_IC was replaced by CONFIG_I2C but just added not replaced for the OndioFM in errr... r5675. The creativezv* and the m200v4 config files defined CONFIG_I2C twice.
2009-09-19 09:37:14 +00:00
config-ondiosp.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-player.h
Move Archos battery runtime estimation defines into config files instead of powermgmt.h. Replace old default values (which were actually the Archos Player currents) with a new default (1mA). This should give nonsense runtime estimates (instead of semi-reasonable but completely wrong estimates) on all players that do not have a battery current defined. Hopefully this will remind people that they should define the battery current when they start a new port.
2009-06-29 18:32:43 +00:00
config-recorder.h
Move Archos battery runtime estimation defines into config files instead of powermgmt.h. Replace old default values (which were actually the Archos Player currents) with a new default (1mA). This should give nonsense runtime estimates (instead of semi-reasonable but completely wrong estimates) on all players that do not have a battery current defined. Hopefully this will remind people that they should define the battery current when they start a new port.
2009-06-29 18:32:43 +00:00
config-recorderv2.h
Move Archos battery runtime estimation defines into config files instead of powermgmt.h. Replace old default values (which were actually the Archos Player currents) with a new default (1mA). This should give nonsense runtime estimates (instead of semi-reasonable but completely wrong estimates) on all players that do not have a battery current defined. Hopefully this will remind people that they should define the battery current when they start a new port.
2009-06-29 18:32:43 +00:00
config-sa9200.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-tpj1022.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-view.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-yh820.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-yh920.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-yh925.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config-yps3.h
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
2009-09-06 17:12:09 +00:00
config.h
Add PLL2 definitions for the S5L8701, plus some config file tweaks for the Nano2G
2009-09-17 07:36:09 +00:00
config_caps.h
cpu.h
Introduce S5L8701 CONFIG_CPU definition for Nano2G and a new CPU_S5L870X "family" define - the 8700 and 8701 are proving to be different. Also move all the cpu-specific defines earlier in config.h
2009-07-15 21:34:31 +00:00
debug.h
New makefile solution: A single invocation of 'make' to build the entire tree. Fully controlled dependencies give faster and more correct recompiles.
2008-11-20 11:27:31 +00:00
disk.h
Commit FS#9545, storage cleanup and multi-driver support
2009-07-17 22:28:49 +00:00
dm320.h
M:Robe 500: Add support for DMA based LCD updates when in Portrait mode. TestFPS measures 190 FPS with the DMA updates vs. 58 FPS for the non-DMA updates.
2009-08-20 00:36:39 +00:00
ds2411.h
eeprom_24cxx.h
Various files: make function implementations consistent with their declaration in the header file or static if
2009-01-31 23:51:11 +00:00
eeprom_settings.h
enc_base.h
events.h
fat.h
Commit FS#9545, storage cleanup and multi-driver support
2009-07-17 22:28:49 +00:00
fmradio.h
fmradio_i2c.h
Fix red.
2008-12-21 20:31:31 +00:00
font.h
Get rid of some of the code duplication from checkwps, it still duplicates a lot though.
2009-09-13 13:40:58 +00:00
gdb_api.h
general.h
Move screendump from apps to firmware, solving two nasty firmware-to-apps calls. This required to move the filename creation functions as well. * Fix bug in the BMP header of Clip screendumps. * Add remote screendump for targets with an LCD remote. * Simplify some ifdefs and rename a macro in the sim.
2009-02-10 23:43:37 +00:00
generic_i2c.h
Simplify generic_i2c, removing the link between i2c address and i2c interface, adding the concept of an i2c bus index.
2009-03-03 18:00:17 +00:00
hangul.h
hd66789r.h
hotswap.h
add firmware/driver/sd.c which contains common code between SD drivers
2009-07-01 21:49:13 +00:00
hwcompat.h
i2c-coldfire.h
i2c-pp.h
Move private #defines from i2c-pp.h to i2c-pp.c
2009-05-21 14:31:47 +00:00
i2c-s5l8700.h
S5L8700: implement i2c driver (used for communicating with the RTC and the codec in the meizus)
2009-06-27 20:11:11 +00:00
i2c.h
i2s.h
iap.h
Correct svn:keywords and svn:eol-style on a few more files.
2009-07-12 09:43:44 +00:00
ifp_usb_serial.h
imx31l.h
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
2009-06-29 14:30:12 +00:00
isp1362.h
isp1583.h
Correct svn:keywords and svn:eol-style on a few more files.
2009-07-12 09:43:44 +00:00
jz4740-codec.h
Fix yellow
2009-05-26 23:28:53 +00:00
jz4740.h
Ingenic Jz4740: add basic frequency switching
2009-07-03 21:34:40 +00:00
jz_mxu.h
Ingenic Jz4740:
2008-12-31 01:57:07 +00:00
kernel.h
Guard the Timeout API declarations with the correct #ifdef
2009-07-14 20:04:26 +00:00
lcd-charcell.h
lcd-remote.h
Latest work on the bmp on-load scaler:
2008-12-26 07:03:22 +00:00
lcd.h
Fix typos in the comment
2009-09-04 22:00:30 +00:00
led.h
logf.h
A new implementation of logf, logfdisplay and logfdump.
2009-08-21 22:54:23 +00:00
ltv350qv.h
lv24020lp.h
m5636.h
m66591.h
Correct svn:keywords and svn:eol-style on a few more files.
2009-07-12 09:43:44 +00:00
mas.h
mas35xx.h
mc13783.h
imx31/mc13783: Do some housekeeping with register macros, function names and other defines. No functional changes (except to alter a couple int priorities).
2009-03-22 01:50:48 +00:00
mcf5249.h
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
2009-06-29 14:30:12 +00:00
mcf5250.h
mips-archdefs.h
Onda VX747:
2009-02-16 22:49:58 +00:00
mips.h
Onda VX747:
2009-02-16 22:49:58 +00:00
mipsregs.h
Onda VX747:
2009-02-16 22:49:58 +00:00
mmc.h
Commit FS#9545, storage cleanup and multi-driver support
2009-07-17 22:28:49 +00:00
mp3_playback.h
mv.h
Commit FS#9545, storage cleanup and multi-driver support
2009-07-17 22:28:49 +00:00
nand.h
fix ata-nand-s5l8700 compilation properly this time
2009-07-17 23:19:21 +00:00
nand_id.h
Correct svn:keywords and svn:eol-style on a few more files.
2009-07-12 09:43:44 +00:00
ohci.h
Add data structures
2009-07-12 15:29:22 +00:00
panic.h
pcf5060x.h
pcf50605.h
pcf50606.h
Re-work D2 power off behaviour.
2009-07-26 19:41:24 +00:00
pcm.h
Gigabeat S: Implement an SDMA API and use it in the PCM driver. Some other miscellaneous adjustments to recording and PCM buffer to accomodate use of physical addresses and cache coherency.
2009-02-08 22:32:41 +00:00
pcm_sampr.h
pl081.h
Sansa AMS: Use DMA for SD transfers (read and write)
2008-11-25 13:38:32 +00:00
pl180.h
Fix the Sansa AMS SD driver
2008-11-16 22:26:50 +00:00
pnx0101.h
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
2009-06-29 14:30:12 +00:00
power.h
Make si4700 tuner driver more sane with bit and field defines and entirely hide strange i2c interface from code with write/set/clear/masked functionality. On Gigabeat S use by-the-book busmode selection and GPIO lines. Implement some primitive station detection, debug registers in screen, and misc. changes to tie things together.
2008-12-27 19:18:50 +00:00
powermgmt.h
1 mA gets rounded to 0 during computation, so use 2 mA as the default.
2009-06-29 21:40:03 +00:00
pp5002.h
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
2009-06-29 14:30:12 +00:00
pp5020.h
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
2009-06-29 14:30:12 +00:00
pp5024.h
pp6100.h
Add information gleaned from disassembling the main firmware image. Detect lcd type in use. Still no actual output
2009-07-17 20:40:40 +00:00
profile.h
qt1106.h
r61509.h
Onda VX7x7: fix error when compiling with USB_BOOT defined
2009-07-29 12:57:42 +00:00
ramdisk.h
Commit FS#9545, storage cleanup and multi-driver support
2009-07-17 22:28:49 +00:00
rolo.h
rtc.h
FS#10569 RTC driver cleanup
2009-09-26 14:58:32 +00:00
s1a0903x01.h
s3c2440.h
Remove OHCI registers from s3c2440.h and move them to their own header. Since s3c2440 seems to be very close to the OHCI spec, there's no reason not to use a generic driver
2009-07-12 15:01:10 +00:00
s5l8700.h
TIMERB is in a different location on the S5L8701
2009-09-17 08:05:19 +00:00
screendump.h
Fix the Playersim as well.
2009-02-11 00:10:35 +00:00
scroll_engine.h
Const police raid\!
2009-09-04 16:04:02 +00:00
sd.h
Commit FS#9545, storage cleanup and multi-driver support
2009-07-17 22:28:49 +00:00
serial.h
Commit FS#8624 by Linus Nielsen, Ryan Press, Craig Elliott, and Kenderes Tamas. Adds preliminary support for numerous accessories that use the ipod serial port on the dock connector. See IpodAccessories for a list of tested devices.
2008-12-25 01:46:16 +00:00
sh7034.h
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
2009-06-29 14:30:12 +00:00
si4700.h
Make si4700 tuner driver more sane with bit and field defines and entirely hide strange i2c interface from code with write/set/clear/masked functionality. On Gigabeat S use by-the-book busmode selection and GPIO lines. Implement some primitive station detection, debug registers in screen, and misc. changes to tie things together.
2008-12-27 19:18:50 +00:00
sound.h
* Move DSP_CALLBACK_* enum to sound.h
2009-08-01 21:38:18 +00:00
spdif.h
spi.h
Correct svn:keywords and svn:eol-style on a few more files.
2009-07-12 09:43:44 +00:00
storage.h
fix ifdef (HAVE_HOTSWAP, not HOTSWAP)
2009-07-19 17:49:06 +00:00
structec.h
sw_i2c.h
synaptics-mep.h
Clean up the Synaptics touchpad driver.
2009-06-19 02:48:15 +00:00
system.h
Fixed checkwps build warnings. Updated checkwps makefile to be closer to main.
2009-09-01 14:53:37 +00:00
tcc77x.h
TCC: Implement ECC error correction for sectors read from NAND. Tested on D2 (78x, MLC) and M200 (77x, SLC).
2009-08-12 19:26:04 +00:00
tcc780x.h
D2: Enable ARM cache coherency functions (eg. during codec load), which should eliminate data aborts/freezes on track changes. NOTE: The linker script reserves space at the end of DRAM for the TTB, but this is not currently used.
2009-09-01 21:35:37 +00:00
tea5760.h
Meizu: implement i2c for the meizu fmradio and update the tea5760 tuner driver
2009-07-07 21:57:16 +00:00
tea5767.h
code police : fix some multiply defined variables
2008-10-18 23:31:29 +00:00
thread.h
MIPS: don't save gp register when switching threads
2009-05-06 19:51:34 +00:00
timer.h
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
2009-06-29 14:30:12 +00:00
tlv320.h
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
2009-01-20 22:55:10 +00:00
touchscreen.h
Touchscreen targets: add calibration screen + rewrite calibration driver (FS#10295)
2009-06-16 17:04:47 +00:00
tsc2100.h
Correct svn:keywords and svn:eol-style on a few more files.
2009-07-12 09:43:44 +00:00
tuner.h
FS#9824: Fix FM channel spacing for Europe
2009-09-24 22:05:07 +00:00
uda1380.h
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
2009-01-20 22:55:10 +00:00
udacodec.h
Create an udacodec interface (similar to ascodec and wmcoded) and adapt/implement it for the iriver h1xx/h3xx and the meizus.
2009-06-28 17:43:04 +00:00
usb-tcc.h
Move tcc77x/usb-tcc77x.c to usb-tcc.c as it is more general than just tcc77x (even usb-tcc is too specific, but I don't know anything better)
2008-11-30 15:43:15 +00:00
usb.h
Philips SA9200: Working touchpad and button lights! Also, improvements to the keymap (still needs work).
2009-06-19 03:23:38 +00:00
usb_ch9.h
reorganise usb_core.c a bit, to make the code more readable and more maintainable (FS#10150 by Tomer Shalev))
2009-04-19 19:53:32 +00:00
usb_core.h
Reorganise USB stack defines. Now config.h decides which class drivers get enabled instead of usb_core.h
2009-05-23 14:30:20 +00:00
usb_drv.h
Add working USB HID driver, by Tomer Shalev (part of his GSoC work).
2009-05-16 15:30:09 +00:00
wm8731.h
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
2009-01-20 22:55:10 +00:00
wm8751.h
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
2009-01-20 22:55:10 +00:00
wm8758.h
FS#10086 - Playback and recording sample rate setting on the 5G iPod
2009-04-06 02:46:42 +00:00
wm8975.h
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
2009-01-20 22:55:10 +00:00
wm8978.h
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
2009-01-20 22:55:10 +00:00
wm8985.h
D2: Enable FM radio (based on FS#10035 by Michael Burtin with some changes by myself). Also updates the LV24020 driver to add optional logf debugging.
2009-03-21 00:13:20 +00:00
wmcodec.h
c8b87d76eb