| .. |
|
common
|
Check for a supported partition type before trying to mount a partition. This will reduce the risk of irregular mounts, e.g. due to stray FAT boot sectors when probing the logical sector size on iPod Video.
|
2008-05-15 22:23:14 +00:00 |
|
decompressor
|
Removed executable flag
|
2007-01-09 23:29:07 +00:00 |
|
drivers
|
Update the LV24020 FM driver so that it can be used on the D2. Register read/write and chip_id detection works now.
|
2008-06-07 19:23:57 +00:00 |
|
export
|
add usb_allowed_current() function, so powermanagement code can know when it's allowed to charge from usb
|
2008-06-04 18:55:58 +00:00 |
|
include
|
Convert the whole codebase to UTF-8, except docs/COMMITTERS and tools/creative.c, which need checking.
|
2008-05-05 10:32:46 +00:00 |
|
target
|
D2: Fixes for 16Gb models with four NAND banks: update MAX_BANKS, configure the chip select GPIO as output and use a couple of #defines to tidy things up.
|
2008-06-09 08:11:11 +00:00 |
|
test
|
Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled).
|
2008-03-26 01:50:41 +00:00 |
|
usbstack
|
add usb_allowed_current() function, so powermanagement code can know when it's allowed to charge from usb
|
2008-06-04 18:55:58 +00:00 |
|
arabjoin.c
|
move some code from .h files to .c files and polish unicode.c a bit
|
2005-12-06 15:04:48 +00:00 |
|
arabjoin.h
|
arabjoin.h was emptied by accident
|
2005-12-06 15:15:54 +00:00 |
|
ata_idle_notify.c
|
It makes more sense for the callback registrar to decide if its a "oneshot" then the callback caller.
|
2008-03-17 05:22:53 +00:00 |
|
backlight.c
|
Oops. Left a couple things in a bad state when using fading.
|
2008-05-14 21:29:43 +00:00 |
|
bidi.c
|
Made source files #include the header file that they implement to make sure they are in sync. Made some local functions static.
|
2008-05-03 08:35:14 +00:00 |
|
buffer.c
|
New scheduler, with priorities for swcodec platforms. Frequent task
|
2006-09-16 16:18:11 +00:00 |
|
COPYING
|
iRiver scramble and descramble code from Dave Cooper
|
2005-01-24 09:01:48 +00:00 |
|
debug.c
|
Made source files #include the header file that they implement to make sure they are in sync. Made some local functions static.
|
2008-05-03 08:35:14 +00:00 |
|
eeprom_settings.c
|
Prepare core support for the iriver bootloader supporting ROM images
|
2007-01-12 18:34:00 +00:00 |
|
enc_base.c
|
Recording: Add AIFF recording to SWCODEC. Note: AIFF playback chokes on sample rates other than 44.1kHz whether recorded or created and saved with an external program. Recorded files will still open in an external editor however.
|
2006-11-24 19:49:04 +00:00 |
|
events.c
|
Increased MAX_SYS_EVENTS from 10 to 16, since there are potentially more than 10 events that can registered. Should fix FS#9039 - *PANIC* event line full (reproduceable).
|
2008-05-26 06:54:57 +00:00 |
|
font.c
|
Killed unnecessary global variables by making them static.
|
2008-04-20 10:24:15 +00:00 |
|
font_cache.c
|
Make a couple of private functions static
|
2008-04-12 17:08:35 +00:00 |
|
general.c
|
mpegplayer: Make playback engine fully seekable and frame-accurate and split into logical parts. Be sure to have all current features work. Actual UI for seeking will be added soon. Recommended GOP size is about 15-30 frames depending on target or seeking can be slow with really long GOPs (nature of MPEG video). More refined encoding recommendations for a particular player should be posted soon.
|
2007-12-29 19:46:35 +00:00 |
|
hangul.c
|
Add support for loadable vkeyboard layouts
|
2006-03-29 16:21:42 +00:00 |
|
hotswap.c
|
Hotswap code shuffling: Fix yellow. Simplify some target function access. Keep fat lock access from compiling for Ondios - think of a nicer way later.
|
2008-03-12 11:08:41 +00:00 |
|
id3.c
|
FS #8680. MOD codec by Rainer Sinsch.
|
2008-05-21 11:19:58 +00:00 |
|
ifp_usb_serial.c
|
move the ifp7xx usb serial driver files to more specific names, to make the "usb_serial" name available for more general usb class driver use
|
2008-03-02 18:16:24 +00:00 |
|
kernel.c
|
1) Use a separate config-<target>.h for Zen Vision(:M) (60GB)
|
2008-05-14 18:55:19 +00:00 |
|
logf.c
|
implement logf over usb-serial. Needs USB_SERIAL defined in usb_core.h to work, and needs to be enabled in the debug menu.
|
2008-03-02 20:45:33 +00:00 |
|
lru.c
|
waiting is over: initial unicode commit
|
2005-12-06 13:27:15 +00:00 |
|
Makefile
|
Prevent sysfont.h being regenerated during every build.
|
2007-01-18 00:46:52 +00:00 |
|
mp3_playback.c
|
Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled).
|
2008-03-26 01:50:41 +00:00 |
|
mp3data.c
|
Convert the whole codebase to UTF-8, except docs/COMMITTERS and tools/creative.c, which need checking.
|
2008-05-05 10:32:46 +00:00 |
|
mpeg.c
|
Fix red (missing header file)
|
2008-04-27 20:09:45 +00:00 |
|
panic.c
|
D2: Stop panic screen from crashing instantly (seems this has been broken for a while).
|
2008-05-31 11:30:24 +00:00 |
|
pcm.c
|
Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit).
|
2008-04-06 04:34:57 +00:00 |
|
pcm_record.c
|
Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit).
|
2008-04-06 04:34:57 +00:00 |
|
pcm_sampr.c
|
Forgot to use cvs add on a few new files in the fresh checkout I used. woops.
|
2006-11-06 18:18:05 +00:00 |
|
powermgmt.c
|
Get a good start on cleaning up powermgmt.c
|
2008-05-19 03:59:52 +00:00 |
|
profile.c
|
Moved private types and constants from profile.h to profile.c
|
2008-04-28 18:41:13 +00:00 |
|
README
|
|
|
|
replaygain.c
|
Made source files #include the header file that they implement to make sure they are in sync. Made some local functions static.
|
2008-05-03 08:35:14 +00:00 |
|
rolo.c
|
Oops. Lost sync on a few instances and 'HI' registers.
|
2008-06-03 05:19:32 +00:00 |
|
rom.lds
|
Make sure the linker considers crt0*.o before all files specified on the command line by using STARTUP() instead of INPUT() in the .lds. Using INPUT() makes the linker process crt0*.o after all files specified on the command line, making linking fail if there are librockbox.a members which are only referenced by crt0*.o. Remove the hackaround that was needed for building the gigabeat S bootloader before (aka UIE() problem).
|
2008-04-29 06:19:32 +00:00 |
|
scroll_engine.c
|
Killed unnecessary global variables by making them static.
|
2008-04-20 10:24:15 +00:00 |
|
sound.c
|
Make life easier for people working on new ports (audio drivers are normally one of the last things written), and revert r17511. Also take the opportunity to use more typical dummy values for VOLUME_MIN and VOLUME_MAX.
|
2008-05-24 08:03:15 +00:00 |
|
SOURCES
|
Gigabeat S:
|
2008-05-21 08:42:11 +00:00 |
|
system.c
|
Make sure the linker considers crt0*.o before all files specified on the command line by using STARTUP() instead of INPUT() in the .lds. Using INPUT() makes the linker process crt0*.o after all files specified on the command line, making linking fail if there are librockbox.a members which are only referenced by crt0*.o. Remove the hackaround that was needed for building the gigabeat S bootloader before (aka UIE() problem).
|
2008-04-29 06:19:32 +00:00 |
|
thread.c
|
Reinstate the awful ATA hack that has no proper reason to exist for iPod 5.5g 60GB and/or 80GB.
|
2008-06-03 04:23:09 +00:00 |
|
timer.c
|
Rename CPU/COP_INT_CLR to CPU/COP_INT_DIS since it's really a 'write one to disable' register and hasn't anything to do with acknowledging interrupts-- that's handled at the module level.
|
2008-06-03 05:08:24 +00:00 |
|
tuner.c
|
e200: Tuner driver needs to yield alot and also be mutexed. FM debug screen got broken again and was ignoring cancellation and not drawing the lines.
|
2007-07-14 22:00:50 +00:00 |
|
usb.c
|
1) Use a separate config-<target>.h for Zen Vision(:M) (60GB)
|
2008-05-14 18:55:19 +00:00 |
bca9703b83