| .. |
|
archos/av300
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
as3525
|
Add e200v2 and m200v2 targets. Move the telechips lcd-ssd1815.c (currently used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip.
|
2008-10-19 14:11:01 +00:00 |
|
imx31
|
Define the various CPUFREQ_* macros so that Gigabeat S compiles with test_codec enabled, and use the correct value.
|
2008-09-21 22:32:56 +00:00 |
|
ipod
|
Greyscale iPods: Fix the default contrast in the bootloader and the core before settings are loaded. Especially important on 1st..3rd Gen as we're setting up the LCD controller quite a bit different than the OF on those.
|
2008-08-15 19:19:46 +00:00 |
|
iriver
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
olympus
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
philips
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pnx0101
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
s3c2440
|
Add the shutdown routine necessary when bootloader is flashed. Normal build/bootloader still operate as expected.
|
2008-09-26 03:08:19 +00:00 |
|
s5l8700
|
Make the meizu m3 load from flash, so interrupts work. More work is needed to get the m6sl "working" again
|
2008-10-18 22:28:59 +00:00 |
|
sandisk
|
Add c200 erase tools. The resulting .bin files can be run from e200tool
|
2008-10-21 18:57:11 +00:00 |
|
tatung/tpj1022
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
tcc77x
|
Using polling instead of interrupts make TX work better, storage worked, but still unstable!
|
2008-10-20 17:18:14 +00:00 |
|
tcc780x
|
Hopefully fix the D2s 'cut and repeated LCD lines' bug (fix suggested by Francesco Rigoni).
|
2008-10-13 20:25:16 +00:00 |
|
tms320dm320
|
Correct HAS_BUTTON_HOLD
|
2008-10-07 19:07:33 +00:00 |
|
adc-as3514.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
adc-pp5020.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
ata-as-arm.S
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
ata-nand-telechips.c
|
Fill some ata_identify fields, e.g model name, firmware, block count
|
2008-10-07 05:04:11 +00:00 |
|
ata-pp5002.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
ata-pp5020.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
ata-sd-pp.c
|
Simplify & fix the MMC driver. After more than 3 years I found that the MMC specs were a bit misleading, and the 'large' MMC which state a block size of 1024 or 2048 bytes and no partial read and/or partial write capability are happily accepting a block size of 512 bytes. So go KISS and remove all the variable/partial block handling code. This fixes the driver for the Transcend 4GB MMCplus, which doesn't cope when we actually set the 2048 byte block size it states. It also makes write operations involving small blocks faster and more reliable. * Note: The 4GB Transcend still doesn't work when plugged at boot, but works when hotplugged.
|
2008-09-14 20:33:24 +00:00 |
|
ata-sd-target.h
|
Moved microsd_int declaration from system-pp502x.c to ata-sd-target.h
|
2008-06-28 19:36:21 +00:00 |
|
ata-target.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
audio-pp.c
|
Ensure consistency between header file and implementation for iPod drivers, by #including the appropriate header file and #ifdef'fing out unused code
|
2008-07-16 11:02:14 +00:00 |
|
crt0-pp-bl.S
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
crt0-pp.S
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
crt0.S
|
remove dead code from firmware/target/arm/crt0.S, and conditionalise bits of it
|
2008-10-11 18:32:17 +00:00 |
|
ffs-arm.S
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2c-pp.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2c-telechips.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2s-pp.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
lcd-as-memframe.S
|
Fix red for target with insanely wide LCDs.
|
2008-07-15 18:59:05 +00:00 |
|
lcd-ssd1815.c
|
add sansa m200v2 support to mkamsboot.
|
2008-10-19 19:51:42 +00:00 |
|
memcpy-arm.S
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
memmove-arm.S
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
memset-arm.S
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
memset16-arm.S
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mmu-arm.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mmu-arm.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pcm-pp.c
|
Fix samplerate setting for mini 1g/2g
|
2008-09-30 20:26:25 +00:00 |
|
pcm-telechips.c
|
Trivial changes to make the main Rockbox builds for the Sansa m200 and Logik DAX ports compile. Note that some codecs are currently disabled (due to lowmem on these targets), but that needs more work and analysis to decide how much RAM we want to allocate to codecs.
|
2008-09-22 19:15:18 +00:00 |
|
system-arm.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
system-pp502x.c
|
Move declaration of button_int and clickwheel_int to the proper header file instead of declaring it locally in the .c file
|
2008-06-29 11:03:12 +00:00 |
|
system-pp5002.c
|
Ensure consistency between header file and implementation for iPod drivers, by #including the appropriate header file and #ifdef'fing out unused code
|
2008-07-16 11:02:14 +00:00 |
|
system-target.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
usb-drv-arc.c
|
reorganise the USB stack a bit to allow for easier integration of non-ARC controller drivers
|
2008-10-03 22:43:16 +00:00 |
|
usb-fw-pp502x.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
usb-fw-pp5002.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
usb-target.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
wmcodec-pp.c
|
iPod Video: Fix playback after recording (FS #7402). Implement recording gain adjustment. * Enable timeout for zero-crossing detection (SLOWCLK), avoids hanging volume/ gain due to DC offsets.
|
2008-09-13 19:34:16 +00:00 |
|
wmcodec-telechips.c
|
Trivial changes to make the main Rockbox builds for the Sansa m200 and Logik DAX ports compile. Note that some codecs are currently disabled (due to lowmem on these targets), but that needs more work and analysis to decide how much RAM we want to allocate to codecs.
|
2008-09-22 19:15:18 +00:00 |
4f81a54829