Michael Sevakis 72ccb14ab1 Gigabeat S: Turn off hardware effects (tone and 3d) when doing digital loopback for FM recording otherwise the signal and levels are poorly represented in monitoring (can't just do ADC->DAC for general FM and get voice too). Some tweaking to input setup to improve gain a tiny bit. A little bit quieter startup too. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26300 a1c6a512-1295-4272-9138-f99709370657		2010-05-26 05:13:45 +00:00
..
gigabeat-s	Gigabeat S: Turn off hardware effects (tone and 3d) when doing digital loopback for FM recording otherwise the signal and levels are poorly represented in monitoring (can't just do ADC->DAC for general FM and get voice too). Some tweaking to input setup to improve gain a tiny bit. A little bit quieter startup too.	2010-05-26 05:13:45 +00:00
app.lds	Gigabeat S: Reclaim about 800K of memory that was laying unused. Get rid of DEVBSS_ATTR for this target and implement as NOCACHEBSS_ATTR. Plugin and codec buffers move so all that is now incompatible (do full update). No version increase for plugins/codecs because the loader will reject them.	2010-05-08 07:45:34 +00:00
ata-imx31.c	Gigabeat S: Reclaim about 800K of memory that was laying unused. Get rid of DEVBSS_ATTR for this target and implement as NOCACHEBSS_ATTR. Plugin and codec buffers move so all that is now incompatible (do full update). No version increase for plugins/codecs because the loader will reject them.	2010-05-08 07:45:34 +00:00
ata-target.h	Gigabeat S/i.MX31: Sort files in the /target tree into things that are SoC-generic (into /imx31) and player-specific (into /gigabeat-s, based upon current appearances). Move i2s clock init into the appropriate file. Housekeeping only-- no functional changes.	2010-04-09 01:21:53 +00:00
avic-imx31.c	i.MX31: Make some style changes to some driver code so that hardware vs. variable access is more obvious to the eye. Change a few data types and qualifiers. No functional differences.	2010-05-07 02:29:18 +00:00
avic-imx31.h	i.MX31: Make some style changes to some driver code so that hardware vs. variable access is more obvious to the eye. Change a few data types and qualifiers. No functional differences.	2010-05-07 02:29:18 +00:00
boot.lds	Gigabeat S: Reclaim about 800K of memory that was laying unused. Get rid of DEVBSS_ATTR for this target and implement as NOCACHEBSS_ATTR. Plugin and codec buffers move so all that is now incompatible (do full update). No version increase for plugins/codecs because the loader will reject them.	2010-05-08 07:45:34 +00:00
ccm-imx31.c	i.MX31/Gigabeat S: Implement frequency and voltage scaling-- 1.6V for 528MHz, and 1.35V for 264MHz and 132MHz. Keep DPTC overdrive ( > 400MHz) voltage scaling off for now because of uncertainties. Simplify the (working) mess later.	2010-04-23 15:32:50 +00:00
ccm-imx31.h	i.MX31/Gigabeat S: Implement frequency and voltage scaling-- 1.6V for 528MHz, and 1.35V for 264MHz and 132MHz. Keep DPTC overdrive ( > 400MHz) voltage scaling off for now because of uncertainties. Simplify the (working) mess later.	2010-04-23 15:32:50 +00:00
crt0.S	Clean the DCache just before going to main because areas were written by init code that need to be coherent (.ncbss and .sdmacode).	2010-05-08 08:32:09 +00:00
debug-imx31.c	Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).	2010-05-06 21:04:40 +00:00
debug-target.h
dvfs_dptc-imx31.c	Gigabeat S bootloader: Fix archaic call placement in dptc_stop which hangs the bootloader before jumping to FW. Let the backlight LED ramp up after unplugging USB which just looks better.	2010-05-06 04:45:05 +00:00
dvfs_dptc-imx31.h	i.MX31/Gigabeat S: This should fix stability problems. One problem was to start using the DVFS controller properly so that interrupts will be masked at the lowest and highest frequency indexes. Millions of useless interrupts were occurring at 132MHz because its index was 2, not 3, which masks it automatically when it can't go slower. Stopping the flood was enough to actually see the difference in general. IRQ must be disabled when fiddling with the CCM registers and only enabled when waiting for voltage ramp as having them enables also causes spurious DVFS ints. Implement interruptible ISR pro/epilogue more safely (always using IRQ stack even in SVC mode handling). Fix an improper inequality in DVFS code (which set regs for down when going up and v.v.). Misc. support changes. Have internal tables take less RAM.	2010-05-06 03:23:51 +00:00
gpio-imx31.c	i.MX31/Gigabeat S minor cleaning: Make HW access more obvious in places I forgot to do earlier. Reduce the number of structs that need to be filled-out for some drivers just to simplify a little. Change some types.	2010-05-07 10:53:19 +00:00
gpio-imx31.h	i.MX31/Gigabeat S minor cleaning: Make HW access more obvious in places I forgot to do earlier. Reduce the number of structs that need to be filled-out for some drivers just to simplify a little. Change some types.	2010-05-07 10:53:19 +00:00
i2c-imx31.c	i.MX31: Make some style changes to some driver code so that hardware vs. variable access is more obvious to the eye. Change a few data types and qualifiers. No functional differences.	2010-05-07 02:29:18 +00:00
i2c-imx31.h	i.MX31: Make some style changes to some driver code so that hardware vs. variable access is more obvious to the eye. Change a few data types and qualifiers. No functional differences.	2010-05-07 02:29:18 +00:00
iomuxc-imx31.c	i.MX31: Add some enums and a couple helper functions to make dealing with pin muxing and pad configuration a bit more sane. Convert any existing code which changes mux/pad settings to use helpers.	2010-04-23 13:46:04 +00:00
iomuxc-imx31.h	i.MX31: Add some enums and a couple helper functions to make dealing with pin muxing and pad configuration a bit more sane. Convert any existing code which changes mux/pad settings to use helpers.	2010-04-23 13:46:04 +00:00
mc13783-imx31.c	i.MX31/Gigabeat S minor cleaning: Make HW access more obvious in places I forgot to do earlier. Reduce the number of structs that need to be filled-out for some drivers just to simplify a little. Change some types.	2010-05-07 10:53:19 +00:00
mmu-imx31.c	Gigabeat S/i.MX31: Sort files in the /target tree into things that are SoC-generic (into /imx31) and player-specific (into /gigabeat-s, based upon current appearances). Move i2s clock init into the appropriate file. Housekeeping only-- no functional changes.	2010-04-09 01:21:53 +00:00
mmu-imx31.h	Gigabeat S/i.MX31: Sort files in the /target tree into things that are SoC-generic (into /imx31) and player-specific (into /gigabeat-s, based upon current appearances). Move i2s clock init into the appropriate file. Housekeeping only-- no functional changes.	2010-04-09 01:21:53 +00:00
rolo_restart_firmware.S	i.MX31/Gigabeat S: Implement frequency and voltage scaling-- 1.6V for 528MHz, and 1.35V for 264MHz and 132MHz. Keep DPTC overdrive ( > 400MHz) voltage scaling off for now because of uncertainties. Simplify the (working) mess later.	2010-04-23 15:32:50 +00:00
sdma-imx31.c	Gigabeat S: Reclaim about 800K of memory that was laying unused. Get rid of DEVBSS_ATTR for this target and implement as NOCACHEBSS_ATTR. Plugin and codec buffers move so all that is now incompatible (do full update). No version increase for plugins/codecs because the loader will reject them.	2010-05-08 07:45:34 +00:00
sdma-imx31.h
sdma_script_code.h	Fix tabs	2010-01-03 10:19:43 +00:00
sdma_struct.h	Fix tabs	2010-01-03 10:19:43 +00:00
serial-imx31.h	Gigabeat S/i.MX31: Sort files in the /target tree into things that are SoC-generic (into /imx31) and player-specific (into /gigabeat-s, based upon current appearances). Move i2s clock init into the appropriate file. Housekeeping only-- no functional changes.	2010-04-09 01:21:53 +00:00
spi-imx31.c	Gigabeat S: Implement LCD contrast, invert and flip modes. Enhance LCD power management. Include init data but it's not needed yet (identical to Gigabeat F).	2010-05-18 23:50:00 +00:00
spi-imx31.h	Gigabeat S: Implement LCD contrast, invert and flip modes. Enhance LCD power management. Include init data but it's not needed yet (identical to Gigabeat F).	2010-05-18 23:50:00 +00:00