..
adc.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
as3514.h
Add register bit defines for as3514 and clean stuff up. Reduce poppiness at startup and shutdown (and even powerup for e200). Really, I can't honestly say it will help anything but an e200v1 but I'm sick of the noises. ;)
2008-11-25 16:16:06 +00:00
as3525.h
Sansa AMS: use vectored interrupts
2008-12-05 17:10:11 +00:00
ascodec.h
Oops, fix red - only include ascodec-target.h when HAVE_AS3514 is defined
2008-10-31 00:37:58 +00:00
ata.h
*_hard_reset() is only used inside ata.c, so there's no need to export it to the world
2008-11-04 19:37:28 +00:00
ata_idle_notify.h
Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*.
2008-11-01 16:14:28 +00:00
ata_mmc.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
audio.h
Moved pcm_record from firmware to apps. Cleaned up some. Now all code using struct mp3entry is in apps.
2008-10-14 11:12:20 +00:00
audiohw.h
Get rid of remaining audiohw_enable_output style codec setup and use pre/post split initialization. Move some SoC-specific code like i2s_reset out of the codec drivers. Helps to unify drivers and it was only ever used to enable. I cannot possibly test everything so report (I'll be on call ;) or fix problems if any crop up.
2008-11-26 14:25:45 +00:00
backlight-thread-fading.h
...and spell the property names correctly.
2008-11-26 08:28:54 +00:00
backlight.h
Add hardware backlight fading on Gigabeat S with fade up and down options in LCD Settings. USE_BACKLIGHT_CUSTOM_FADING_BOOL is used to specify the setting type needed but leave the fading code itself implementation-defined.
2008-11-26 21:26:22 +00:00
bidi.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
bitswap.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
buffer.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
button.h
Commit FS#9308: differentiate between TOUCHPAD & TOUCHSCREEN
2008-08-23 09:46:38 +00:00
config-c100.h
fix reds
2008-11-01 16:49:38 +00:00
config-c200.h
Fix reds. Also note my r19221 commit message had a typo - shoudld have been e200/c200, not e100.
2008-11-26 10:21:03 +00:00
config-clip.h
Sansa AMS: PCM driver (FS#9592)
2008-12-04 22:27:48 +00:00
config-cowond2.h
Move tcc77x/usb-tcc77x.c to usb-tcc.c as it is more general than just tcc77x (even usb-tcc is too specific, but I don't know anything better)
2008-11-30 15:43:15 +00:00
config-creativezv.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-creativezvm.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-creativezvm60gb.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-e200.h
Fix reds. Also note my r19221 commit message had a typo - shoudld have been e200/c200, not e100.
2008-11-26 10:21:03 +00:00
config-e200v2.h
AMS Sansa (formerly 'V2') use the as3514 RTC
2008-11-10 18:18:27 +00:00
config-fmrecorder.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-fuze.h
AMS Sansa (formerly 'V2') use the as3514 RTC
2008-11-10 18:18:27 +00:00
config-gigabeat-s.h
Gigabeat S: Turn off backlight LED supply after a 2-second delay and save a little power. Hardware fading required keeping supply enabled during fade out. Let fade happen at poweroff (might as well~~~).
2008-12-04 04:16:53 +00:00
config-gigabeat.h
Meg F/X can beep and click using a hardware timer so let us try it out. To match things up better, fix PCM beeping to give correct frequency (and get a pointer wrap bug too). Do some minor adjustments to compensate for corrections.
2008-12-07 00:07:47 +00:00
config-h10.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-h10_5gb.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-h100.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-h120.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-h300.h
Straighten out some powermanagement stuff. Give target complete control over how power inputs are sensed. Clean SIMULATOR stuff out of target files. Get rid of USB charging option on targets that don't support it or don't implement it yet. Menu string remains to avoid language incompatibility but should be removed on next cleanup for targets not using it (notice in english.lang). global_settings becomes incompatible for some builds and so plugin API version is incremented.
2008-12-03 19:54:25 +00:00
config-hdd1630.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-iaudio7.h
Replace USE_HIGH_SPEED with USB_NO_HIGH_SPEED, as high speed support is the normal case
2008-11-30 15:53:36 +00:00
config-iaudiom3.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-iaudiom5.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-iaudiox5.h
Fix reds. Also note my r19221 commit message had a typo - shoudld have been e200/c200, not e100.
2008-11-26 10:21:03 +00:00
config-ifp7xx.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-ipod1g2g.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-ipod3g.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-ipod4g.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-ipodcolor.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-ipodmini.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-ipodmini2g.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-ipodnano.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-ipodvideo.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-logikdax.h
Replace USE_HIGH_SPEED with USB_NO_HIGH_SPEED, as high speed support is the normal case
2008-11-30 15:53:36 +00:00
config-m200.h
fix reds
2008-11-01 16:49:38 +00:00
config-m200v4.h
Sansa AMS: PCM driver (FS#9592)
2008-12-04 22:27:48 +00:00
config-meizu-m3.h
Add new storage-related defines for meizu
2008-11-01 17:25:49 +00:00
config-meizu-m6sl.h
Add new storage-related defines for meizu
2008-11-01 17:25:49 +00:00
config-meizu-m6sp.h
Add new storage-related defines for meizu
2008-11-01 17:25:49 +00:00
config-mrobe100.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-mrobe500.h
New makefile solution: A single invocation of 'make' to build the entire tree. Fully controlled dependencies give faster and more correct recompiles.
2008-11-20 11:27:31 +00:00
config-ondavx747.h
Commit some USB and ATA rework/refactoring (+ USB GPIO detection).
2008-11-21 12:50:06 +00:00
config-ondavx767.h
Onda VX747:
2008-11-04 20:30:01 +00:00
config-ondiofm.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-ondiosp.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-player.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-recorder.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-recorderv2.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-sa9200.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-tpj1022.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config.h
Sansa AMS: use non-busy wakeup to signal end of DMA transfer
2008-11-26 16:02:00 +00:00
config_caps.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
cpu.h
Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h
2008-10-12 16:46:01 +00:00
debug.h
New makefile solution: A single invocation of 'make' to build the entire tree. Fully controlled dependencies give faster and more correct recompiles.
2008-11-20 11:27:31 +00:00
disk.h
Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*.
2008-11-01 16:14:28 +00:00
dm320.h
Fix yellow.
2008-12-04 15:19:49 +00:00
ds2411.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
eeprom_24cxx.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
eeprom_settings.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
enc_base.h
New recording setting to configure how mono recordings are made. Previously, this was always L+R, which was kinda silly if your signal was on L only. This setting allows for L, R or L+R. SWCODEC only for now, to be added for HWCODEC (although that will only be L and L+R probably)
2008-10-08 22:18:16 +00:00
events.h
Accept FS#9480 - centralise and organise the events in the apps/ layer.
2008-10-16 10:38:03 +00:00
fat.h
Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*.
2008-11-01 16:14:28 +00:00
fmradio.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
fmradio_i2c.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
font.h
Added support for configurable rockbox directory. FS#9567 by Alex Bennee.
2008-11-24 22:16:07 +00:00
gdb_api.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
general.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
generic_i2c.h
Generic I2C: fix various problems with this (now) unused driver
2008-12-07 19:25:51 +00:00
hangul.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
hd66789r.h
Commit fs#9404 (iAudio 7 updates by vitja). Also fixes play/pause behaviour on D2.
2008-09-16 08:09:44 +00:00
hotswap.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
hwcompat.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
i2c-coldfire.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
i2c-pp.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
i2c.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
i2s.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
ifp_usb_serial.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
imx31l.h
Fix yellow.
2008-12-04 15:19:49 +00:00
isp1362.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
isp1583.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
jz4740.h
Ingenic targets:
2008-12-04 18:26:19 +00:00
kernel.h
Fix red-- it should.
2008-10-27 17:18:01 +00:00
lcd-charcell.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
lcd-remote.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
lcd.h
Make lcd_set_enable_hook() conditional on HAVE_LCD_ENABLE and HAVE_LCD_COLOR
2008-10-31 21:48:44 +00:00
led.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
logf.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
ltv350qv.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
lv24020lp.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
m5636.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
mas.h
Moved pcm_record from firmware to apps. Cleaned up some. Now all code using struct mp3entry is in apps.
2008-10-14 11:12:20 +00:00
mas35xx.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
mc13783.h
MC13783 PMIC: Make some defines more strictly correct-- interrupts, etc.
2008-11-19 06:22:09 +00:00
mcf5249.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
mcf5250.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
mips-archdefs.h
And set svn:eol-style ...
2008-07-14 15:19:29 +00:00
mips.h
And set svn:eol-style ...
2008-07-14 15:19:29 +00:00
mipsregs.h
Onda VX747:
2008-11-04 20:30:01 +00:00
mmc.h
Since *set_led_enabled() is actually an ata-specific feature, move it back to ata_* only
2008-11-04 19:57:36 +00:00
mp3_playback.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
mv.h
Now also commit added files
2008-11-01 16:25:04 +00:00
nand.h
Since *set_led_enabled() is actually an ata-specific feature, move it back to ata_* only
2008-11-04 19:57:36 +00:00
nand_id.h
Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*.
2008-11-01 16:14:28 +00:00
panic.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
pcf5060x.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
pcf50605.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
pcf50606.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
pcm.h
Red build fix: Moved PCM #defines from pcm_record.h to pcm.h. Added necessary #includes to statusbar.c and s1a0903x01.c.
2008-10-14 11:43:32 +00:00
pcm_sampr.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
pl081.h
Sansa AMS: Use DMA for SD transfers (read and write)
2008-11-25 13:38:32 +00:00
pl180.h
Fix the Sansa AMS SD driver
2008-11-16 22:26:50 +00:00
pnx0101.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
power.h
Straighten out some powermanagement stuff. Give target complete control over how power inputs are sensed. Clean SIMULATOR stuff out of target files. Get rid of USB charging option on targets that don't support it or don't implement it yet. Menu string remains to avoid language incompatibility but should be removed on next cleanup for targets not using it (notice in english.lang). global_settings becomes incompatible for some builds and so plugin API version is incremented.
2008-12-03 19:54:25 +00:00
powermgmt.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
pp5002.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
pp5020.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
pp5024.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
profile.h
Commit FS#9170 by Dave Hooper. Adds support for profiling on ARM, and fixes various issues with compiling profile builds. Also, note that profile_reader.pl syntax has changed.
2008-07-28 22:43:41 +00:00
qt1106.h
set svn properties
2008-09-17 18:50:34 +00:00
r61509.h
Fix the LCD bug!
2008-07-16 15:25:35 +00:00
ramdisk.h
Since *set_led_enabled() is actually an ata-specific feature, move it back to ata_* only
2008-11-04 19:57:36 +00:00
rolo.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
rtc.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
s1a0903x01.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
s3c2440.h
Meg-FX: s3c register definitions really should be unsigned. Switch from 'int' to 'unsigned long' like other targets.
2008-12-04 15:06:48 +00:00
s5l8700.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
scroll_engine.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
sd.h
sd.h : avoid namespace collision by prefixing defines with SD_
2008-11-09 23:40:21 +00:00
serial.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
sh7034.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
si4700.h
Add more driver stubs to make the Fuze and e200v2 main builds compile; Correct the memory definition for the Fuze (8MB)
2008-11-11 14:46:13 +00:00
sound.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
spdif.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
spi.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
storage.h
Since *set_led_enabled() is actually an ata-specific feature, move it back to ata_* only
2008-11-04 19:57:36 +00:00
structec.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
sw_i2c.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
system.h
Macros should be ALL CAPS, so rename (un)likely() to (UN)LIKELY()
2008-11-22 16:56:20 +00:00
tcc77x.h
Initial commit of iaudio 7 port by Vitja Makarov (FS#9245). Port is at quite an advanced stage, but is troubled by the lack of a reliable NAND driver (similar to the Cowon D2 port) and is not yet suitable for non-developers.
2008-09-06 17:50:59 +00:00
tcc780x.h
Add some missed bits + change MODE to TMODE
2008-09-22 19:27:21 +00:00
tea5767.h
code police : fix some multiply defined variables
2008-10-18 23:31:29 +00:00
thread.h
Onda VX747:
2008-09-14 16:26:08 +00:00
timer.h
Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h
2008-10-12 16:46:01 +00:00
tlv320.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
tsc2100.h
Minor missing #include and static function fixes for mrobe
2008-09-10 20:14:22 +00:00
tuner.h
Add more driver stubs to make the Fuze and e200v2 main builds compile; Correct the memory definition for the Fuze (8MB)
2008-11-11 14:46:13 +00:00
uda1380.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
usb-tcc.h
Move tcc77x/usb-tcc77x.c to usb-tcc.c as it is more general than just tcc77x (even usb-tcc is too specific, but I don't know anything better)
2008-11-30 15:43:15 +00:00
usb.h
Add more driver stubs to make the Fuze and e200v2 main builds compile; Correct the memory definition for the Fuze (8MB)
2008-11-11 14:46:13 +00:00
usb_ch9.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
usb_core.h
reorganise the USB stack a bit to allow for easier integration of non-ARC controller drivers
2008-10-03 22:43:16 +00:00
usb_drv.h
Remove usb_drv_wait from the public usb api, and remove the implementation from usb-drv-arc.c, as it is not actually used
2008-11-30 15:56:49 +00:00
wm8721.h
Remove the audiohw_set_nsorder() function since it is not used, only implemented on WM8731 and not wanted/used there.
2008-10-18 22:37:41 +00:00
wm8731.h
Simplify the wm8731 driver by adding a masked write function. Change _write_or/and to _set/clear. Reduce init sequence by initializing shadows to hardware defaults.
2008-11-24 15:26:39 +00:00
wm8751.h
cleanup some audio driver headers
2008-07-02 23:01:21 +00:00
wm8758.h
Remove the audiohw_set_nsorder() function since it is not used, only implemented on WM8731 and not wanted/used there.
2008-10-18 22:37:41 +00:00
wm8975.h
Remove the audiohw_set_nsorder() function since it is not used, only implemented on WM8731 and not wanted/used there.
2008-10-18 22:37:41 +00:00
wm8978.h
Audio samplerate control for Gigabeat S: 8, 11.025, 12, 16, 22.050, 24, 32, 44.1 and 48 kHz.
2008-11-22 12:17:26 +00:00
wm8985.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
wmcodec.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
95d58d3058