rockbox

History

Alexander Levin a57ec82a4e Set SVN keywords; small addition to the comment. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25522 a1c6a512-1295-4272-9138-f99709370657		2010-04-07 19:30:32 +00:00
..
common	Add IO priority handling. Currently all IO has equal priority, except the dircache scanning thread which is lower. This fixes the slow boot problem for me, with the added benefit that actual audio playback also starts faster.	2010-04-03 22:02:09 +00:00
decompressor
drivers	Add IO priority handling. Currently all IO has equal priority, except the dircache scanning thread which is lower. This fixes the slow boot problem for me, with the added benefit that actual audio playback also starts faster.	2010-04-03 22:02:09 +00:00
export	Gigabeat S (imx31): Begin voltage and frequency scaling code. For now, to avoid overdrive voltage, just lower core voltage to 1.35V since voltage scaling shouldn't be required for frequencies lower than 399 MHz (according to Freescale BSP, which set all working points to 1.35V for those frequencies). Perhaps battery life will improve as well (cross fingers :).	2010-04-07 03:43:48 +00:00
include	Set SVN keywords; small addition to the comment.	2010-04-07 19:30:32 +00:00
target	Gigabeat S: Extend the upper temperature range for battery charging to 50C: OK and 45C: Resume. Currently extended disk activity can cause it to detect overtemp which doesn't quite seem correct. Add macros for the range so that they may be target-specific.	2010-04-07 06:26:18 +00:00
test
usbstack	Add IO priority handling. Currently all IO has equal priority, except the dircache scanning thread which is lower. This fixes the slow boot problem for me, with the added benefit that actual audio playback also starts faster.	2010-04-03 22:02:09 +00:00
arabjoin.c
arabjoin.h
ata_idle_notify.c
backlight-sw-fading.c
backlight.c
bidi.c
buffer.c
COPYING
debug.c
eeprom_settings.c
enc_base.c
events.c
firmware.make
font.c	font.c: correct checking cache_fd. remove some trailing spaces.	2010-02-26 07:16:32 +00:00
font_cache.c
general.c
hangul.c
hotswap.c
ifp_usb_serial.c
kernel.c
logf.c
lru.c
mp3_playback.c
panic.c	PANIC!!!	2010-03-03 02:36:51 +00:00
pcm.c	New plugin: FFT, A frequency analyzer plugin	2010-02-10 19:44:11 +00:00
pcm_sampr.c
powermgmt.c	Disable runtime estimation altogether when there is no runtime current defined. It doens't work and people somehow got confused by seeing obviously wrong values. Now it will just return -1 if you try to estimate runtime without having the current defined.	2010-03-16 17:13:25 +00:00
profile.c
README
rolo.c
rom.lds
screendump.c
scroll_engine.c
sound.c
SOURCES	Gigabeat S (imx31): Begin voltage and frequency scaling code. For now, to avoid overdrive voltage, just lower core voltage to 1.35V since voltage scaling shouldn't be required for frequencies lower than 399 MHz (according to Freescale BSP, which set all working points to 1.35V for those frequencies). Perhaps battery life will improve as well (cross fingers :).	2010-04-07 03:43:48 +00:00
storage.c	use THREAD_ID_CURRENT instead of thread_get_current()	2010-04-03 22:43:36 +00:00
system.c
thread.c	Add IO priority handling. Currently all IO has equal priority, except the dircache scanning thread which is lower. This fixes the slow boot problem for me, with the added benefit that actual audio playback also starts faster.	2010-04-03 22:02:09 +00:00
timer.c
tuner.c
usb.c

README

See docs/README