Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm/imx31
History
Michael Sevakis 90aafeae67 Fix yellow. Left an unused temp variable. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29117 a1c6a512-1295-4272-9138-f99709370657
2011-01-22 21:11:29 +00:00
..
gigabeat-s i.MX31: Allow interrupts in thread context, not just ISR context, during the lengthy DVFS voltage ramp-up delay. Also, explicitly enable them just before mc13783_init since that does anyway because of the PMIC write inside it. 2011-01-22 21:04:25 +00:00
app.lds Some static data is only used by .init functions. Add .initdata to declare such data (otherwise section conflicts arise). For i.MX31, use INITDATA_ATTR in the appropriate places. 2011-01-08 20:42:51 +00:00
ata-imx31.c i.MX31: Busy wait for a couple microseconds at most then sleep until next tick when polling drive status. This prevents pointless jumps to overdrive speed from perceived high load when waiting for lengthy ops to complete such as spinup and sleep. 2011-01-22 09:23:31 +00:00
ata-target.h i.MX31: Busy wait for a couple microseconds at most then sleep until next tick when polling drive status. This prevents pointless jumps to overdrive speed from perceived high load when waiting for lengthy ops to complete such as spinup and sleep. 2011-01-22 09:23:31 +00:00
avic-imx31.c
avic-imx31.h Gigabeat S/i.MX31: Take care of an interrupt priority inversion that can happen during PCM callback lockout when DVFS switches frequecies during the lockout, preventing a thread from unlocking the callback until DVFS finishes, causing an SSI FIFO underrun. Hadn't thought of an acceptable way to deal with it before. 2011-01-07 20:40:36 +00:00
boot.lds Some static data is only used by .init functions. Add .initdata to declare such data (otherwise section conflicts arise). For i.MX31, use INITDATA_ATTR in the appropriate places. 2011-01-08 20:42:51 +00:00
ccm-imx31.c Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout. 2010-06-30 02:02:46 +00:00
ccm-imx31.h
crt0.S Gigabeat S: Renovate bootloader a bit to show splash, implement verbose, shutdown on low battery, handle hold-switch-on and wait only so long for USB if a USB charger is inserted at boot instead of being connected to a host. 'Bootloader USB mode' display is just part of normal printf stream now. Move interrupt stacks into .bss area so they aren't loaded (for firmware too). 2011-01-21 07:05:51 +00:00
debug-imx31.c i.MX31: Add a debug menu to play around with DVFS/DPTC settings for fun, testing or benchmarking purposes. Can set the CPU frequency working point, whether DPTC voltage scaling is enabled and change the software-programmable load tracking weights. 2011-01-22 16:58:17 +00:00
debug-target.h i.MX31: Add a debug menu to play around with DVFS/DPTC settings for fun, testing or benchmarking purposes. Can set the CPU frequency working point, whether DPTC voltage scaling is enabled and change the software-programmable load tracking weights. 2011-01-22 16:58:17 +00:00
dvfs_dptc-imx31.c Fix yellow. Left an unused temp variable. 2011-01-22 21:11:29 +00:00
dvfs_dptc-imx31.h i.MX31: Add a debug menu to play around with DVFS/DPTC settings for fun, testing or benchmarking purposes. Can set the CPU frequency working point, whether DPTC voltage scaling is enabled and change the software-programmable load tracking weights. 2011-01-22 16:58:17 +00:00
gpio-imx31.c
gpio-imx31.h
i2c-imx31.c
i2c-imx31.h
iomuxc-imx31.c Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout. 2010-06-30 02:02:46 +00:00
iomuxc-imx31.h
mc13783-imx31.c Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout. 2010-06-30 02:02:46 +00:00
mmu-imx31.c
mmu-imx31.h
rolo_restart_firmware.S Introduce NORETURN_ATTR wrapper for __attribute__((noreturn)), using this and a bit further cleanup in main gets rid of a warning when compiling for android. 2010-08-12 13:38:25 +00:00
sdma-imx31.c i.MX31: Make DMA ISR call loop a bit more efficient. 2010-06-30 07:08:10 +00:00
sdma-imx31.h
sdma_script_code.h Some static data is only used by .init functions. Add .initdata to declare such data (otherwise section conflicts arise). For i.MX31, use INITDATA_ATTR in the appropriate places. 2011-01-08 20:42:51 +00:00
sdma_struct.h
serial-imx31.h
spi-imx31.c
spi-imx31.h