Robert Kukla be8da842b8 fix typo in r26245 (I guess not many people use rtc_alarm with gigabeat f) ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26635 a1c6a512-1295-4272-9138-f99709370657		2010-06-06 17:37:13 +00:00
..
audio	Fix wrongly nested commenting	2010-06-05 21:09:11 +00:00
rtc	fix typo in r26245 (I guess not many people use rtc_alarm with gigabeat f)	2010-06-06 17:37:13 +00:00
tuner	Si4700 tuner: It doesn't like to do i2c while powered off and hangs the bus. Make 'pause' simply be 'mute', allowing tuning during user mute as well as nicer-sounding unmute.	2010-05-24 20:12:10 +00:00
ata.c	ata: do some threading-related corrections (some sync related where it matters). Make sure 'sleeping' is 'false' before the powerup sequence (throws-off powermgmt and it *is* about to woken again and powermgmt will need to compensate). Avoid looking at mutex flag directly; there's no tangible benefit I can discern and changes to the kernel that alter the meaning shouldn't be able to break anything. For that, in the jz sd driver, have sd_disk_is_active just return 'false' like all the other SD drivers do. If it *must* return this, it should implement it's own method but it seems to not matter.	2010-05-21 15:33:31 +00:00
ata_flash.c
ata_mmc.c	Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix.	2010-06-06 13:20:47 +00:00
button.c	Commit FS#10887 by me. Change the check for software poweroff to be that the power button is held, not that the power button is held AND that no other button is held. This makes shutting down players with small tightly spaced buttons (Sandisk...) much easier. This also means that combos involving the power button can now potientially power off the player. The H10 and sansas excluding the Fuze use a combo involving power for AB repeat mode. However, the timeout for shutdown is much longer then the long press duration needed for AB repeat, and in practice seems to not be a problem on these players. I've tested this on various players for a long time and bugged other people to try it out, so I think its pretty safe, but if theres problems it can be reverted or keymaps tweaked.	2010-05-29 21:54:14 +00:00
dac.c
dac.h	Final removal of tabs in firmware path	2010-01-03 11:31:14 +00:00
eeprom_24cxx.c
fat.c	Add IO priority handling. Currently all IO has equal priority, except the dircache scanning thread which is lower. This fixes the slow boot problem for me, with the added benefit that actual audio playback also starts faster.	2010-04-03 22:02:09 +00:00
fmradio.c
generic_i2c.c
i2c.c
isp1362.c
isp1583.c	FS#10226 - isp1583.c code cosmetics	2009-10-01 05:40:20 +00:00
lcd-1bit-vert.c	Rename sdl lcd initialization to (remote_)lcd_init_device which enables removing two #ifdef SIMULATOR and makes it happen as on target.	2010-05-18 12:27:20 +00:00
lcd-2bit-horz.c	Comment out lcd_drawline() DEBUGF messages which show in various simulators	2010-02-20 06:42:45 +00:00
lcd-2bit-vert.c	Comment out lcd_drawline() DEBUGF messages which show in various simulators	2010-02-20 06:42:45 +00:00
lcd-2bit-vi.c	Rename sdl lcd initialization to (remote_)lcd_init_device which enables removing two #ifdef SIMULATOR and makes it happen as on target.	2010-05-18 12:27:20 +00:00
lcd-16bit-vert.c	Comment out lcd_drawline() DEBUGF messages which show in various simulators	2010-02-20 06:42:45 +00:00
lcd-16bit.c	Comment out lcd_drawline() DEBUGF messages which show in various simulators	2010-02-20 06:42:45 +00:00
lcd-bitmap-common.c	avoid overflow in puts_scroll().	2010-05-21 13:30:21 +00:00
lcd-charcell.c	avoid overflow in puts_scroll().	2010-05-21 13:30:21 +00:00
lcd-charset-player.c	Final removal of tabs in firmware path	2010-01-03 11:31:14 +00:00
lcd-remote-1bit-v.c
lcd-remote-2bit-vi.c
led.c
m5636.c
m66591.c	M66591 Driver: Correct some comments.	2010-03-17 01:43:15 +00:00
mas.c
nand_id.c
pcf50605.c
pcf50606.c	D2: Reduce binsize a bit by using arrays for the PMU initialisation.	2009-10-11 21:12:06 +00:00
pcf50635.c	D2: Reduce binsize a bit by using arrays for the PMU initialisation.	2009-10-11 21:12:06 +00:00
qt1106.c
ramdisk.c
sd.c	remane hotswap.* to sdmmc.*. The contents have nothing at all to do with hotswapping things	2010-06-05 21:12:16 +00:00
serial.c	Simplify some boolean expressions that compare directly against 'true'	2010-01-02 16:03:30 +00:00
sw_i2c.c
synaptics-mep.c	Packard Bell Vibe 500: touchpad code rework. Improve touch sensivity a bit by setting the MEP parameters in the power_init() function. Implement new function in synaptics-mep driver (touchpad_set_parameter) necessary for it. Move the button lights code to the target backlight file.	2010-02-06 19:15:43 +00:00
touchscreen.c	Remove svn:executable from firmware	2009-10-31 02:26:40 +00:00
tsc200x.c	Touchscreen support for newer Cowon D2+ hardware revisions (using TSC200x touchscreen controller).	2009-10-15 20:13:29 +00:00
tsc2100.c	M:Robe 500: Fix FIQ's and make the audio DMA a FIQ, simplify the ADC code and make it more reliable. Fix ADC problems on initial boot.	2009-12-12 18:36:52 +00:00