Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm/imx31
History
Michael Sevakis 60f843bf18 Configure Gigabeat S with EABI compiler by default. Implement the INIT section that this enables (due to selective need for long calls). Remove pcm_postinit from INIT section since it's asynchronous. Disable strict aliasing on SPC codec for now just to shut it up. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26779 a1c6a512-1295-4272-9138-f99709370657
2010-06-11 14:39:35 +00:00
..
gigabeat-s Configure Gigabeat S with EABI compiler by default. Implement the INIT section that this enables (due to selective need for long calls). Remove pcm_postinit from INIT section since it's asynchronous. Disable strict aliasing on SPC codec for now just to shut it up. 2010-06-11 14:39:35 +00:00
app.lds Configure Gigabeat S with EABI compiler by default. Implement the INIT section that this enables (due to selective need for long calls). Remove pcm_postinit from INIT section since it's asynchronous. Disable strict aliasing on SPC codec for now just to shut it up. 2010-06-11 14:39:35 +00:00
ata-imx31.c Gigabeat S: Reclaim about 800K of memory that was laying unused. Get rid of DEVBSS_ATTR for this target and implement as NOCACHEBSS_ATTR. Plugin and codec buffers move so all that is now incompatible (do full update). No version increase for plugins/codecs because the loader will reject them. 2010-05-08 07:45:34 +00:00
ata-target.h Gigabeat S/i.MX31: Sort files in the /target tree into things that are SoC-generic (into /imx31) and player-specific (into /gigabeat-s, based upon current appearances). Move i2s clock init into the appropriate file. Housekeeping only-- no functional changes. 2010-04-09 01:21:53 +00:00
avic-imx31.c Configure Gigabeat S with EABI compiler by default. Implement the INIT section that this enables (due to selective need for long calls). Remove pcm_postinit from INIT section since it's asynchronous. Disable strict aliasing on SPC codec for now just to shut it up. 2010-06-11 14:39:35 +00:00
avic-imx31.h i.MX31: Make some style changes to some driver code so that hardware vs. variable access is more obvious to the eye. Change a few data types and qualifiers. No functional differences. 2010-05-07 02:29:18 +00:00
boot.lds Gigabeat S: Reclaim about 800K of memory that was laying unused. Get rid of DEVBSS_ATTR for this target and implement as NOCACHEBSS_ATTR. Plugin and codec buffers move so all that is now incompatible (do full update). No version increase for plugins/codecs because the loader will reject them. 2010-05-08 07:45:34 +00:00
ccm-imx31.c i.MX31/Gigabeat S: Implement frequency and voltage scaling-- 1.6V for 528MHz, and 1.35V for 264MHz and 132MHz. Keep DPTC overdrive ( > 400MHz) voltage scaling off for now because of uncertainties. Simplify the (working) mess later. 2010-04-23 15:32:50 +00:00
ccm-imx31.h i.MX31/Gigabeat S: Implement frequency and voltage scaling-- 1.6V for 528MHz, and 1.35V for 264MHz and 132MHz. Keep DPTC overdrive ( > 400MHz) voltage scaling off for now because of uncertainties. Simplify the (working) mess later. 2010-04-23 15:32:50 +00:00
crt0.S Configure Gigabeat S with EABI compiler by default. Implement the INIT section that this enables (due to selective need for long calls). Remove pcm_postinit from INIT section since it's asynchronous. Disable strict aliasing on SPC codec for now just to shut it up. 2010-06-11 14:39:35 +00:00
debug-imx31.c Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes). 2010-05-06 21:04:40 +00:00
debug-target.h
dvfs_dptc-imx31.c Configure Gigabeat S with EABI compiler by default. Implement the INIT section that this enables (due to selective need for long calls). Remove pcm_postinit from INIT section since it's asynchronous. Disable strict aliasing on SPC codec for now just to shut it up. 2010-06-11 14:39:35 +00:00
dvfs_dptc-imx31.h i.MX31/Gigabeat S: This should fix stability problems. One problem was to start using the DVFS controller properly so that interrupts will be masked at the lowest and highest frequency indexes. Millions of useless interrupts were occurring at 132MHz because its index was 2, not 3, which masks it automatically when it can't go slower. Stopping the flood was enough to actually see the difference in general. IRQ must be disabled when fiddling with the CCM registers and only enabled when waiting for voltage ramp as having them enables also causes spurious DVFS ints. Implement interruptible ISR pro/epilogue more safely (always using IRQ stack even in SVC mode handling). Fix an improper inequality in DVFS code (which set regs for down when going up and v.v.). Misc. support changes. Have internal tables take less RAM. 2010-05-06 03:23:51 +00:00
gpio-imx31.c Configure Gigabeat S with EABI compiler by default. Implement the INIT section that this enables (due to selective need for long calls). Remove pcm_postinit from INIT section since it's asynchronous. Disable strict aliasing on SPC codec for now just to shut it up. 2010-06-11 14:39:35 +00:00
gpio-imx31.h i.MX31/Gigabeat S minor cleaning: Make HW access more obvious in places I forgot to do earlier. Reduce the number of structs that need to be filled-out for some drivers just to simplify a little. Change some types. 2010-05-07 10:53:19 +00:00
i2c-imx31.c i.MX31: Make some style changes to some driver code so that hardware vs. variable access is more obvious to the eye. Change a few data types and qualifiers. No functional differences. 2010-05-07 02:29:18 +00:00
i2c-imx31.h i.MX31: Make some style changes to some driver code so that hardware vs. variable access is more obvious to the eye. Change a few data types and qualifiers. No functional differences. 2010-05-07 02:29:18 +00:00
iomuxc-imx31.c i.MX31: Add some enums and a couple helper functions to make dealing with pin muxing and pad configuration a bit more sane. Convert any existing code which changes mux/pad settings to use helpers. 2010-04-23 13:46:04 +00:00
iomuxc-imx31.h i.MX31: Add some enums and a couple helper functions to make dealing with pin muxing and pad configuration a bit more sane. Convert any existing code which changes mux/pad settings to use helpers. 2010-04-23 13:46:04 +00:00
mc13783-imx31.c Configure Gigabeat S with EABI compiler by default. Implement the INIT section that this enables (due to selective need for long calls). Remove pcm_postinit from INIT section since it's asynchronous. Disable strict aliasing on SPC codec for now just to shut it up. 2010-06-11 14:39:35 +00:00
mmu-imx31.c Gigabeat S/i.MX31: Sort files in the /target tree into things that are SoC-generic (into /imx31) and player-specific (into /gigabeat-s, based upon current appearances). Move i2s clock init into the appropriate file. Housekeeping only-- no functional changes. 2010-04-09 01:21:53 +00:00
mmu-imx31.h Gigabeat S/i.MX31: Sort files in the /target tree into things that are SoC-generic (into /imx31) and player-specific (into /gigabeat-s, based upon current appearances). Move i2s clock init into the appropriate file. Housekeeping only-- no functional changes. 2010-04-09 01:21:53 +00:00
rolo_restart_firmware.S i.MX31/Gigabeat S: Implement frequency and voltage scaling-- 1.6V for 528MHz, and 1.35V for 264MHz and 132MHz. Keep DPTC overdrive ( > 400MHz) voltage scaling off for now because of uncertainties. Simplify the (working) mess later. 2010-04-23 15:32:50 +00:00
sdma-imx31.c Configure Gigabeat S with EABI compiler by default. Implement the INIT section that this enables (due to selective need for long calls). Remove pcm_postinit from INIT section since it's asynchronous. Disable strict aliasing on SPC codec for now just to shut it up. 2010-06-11 14:39:35 +00:00
sdma-imx31.h
sdma_script_code.h Fix tabs 2010-01-03 10:19:43 +00:00
sdma_struct.h Fix tabs 2010-01-03 10:19:43 +00:00
serial-imx31.h Gigabeat S/i.MX31: Sort files in the /target tree into things that are SoC-generic (into /imx31) and player-specific (into /gigabeat-s, based upon current appearances). Move i2s clock init into the appropriate file. Housekeeping only-- no functional changes. 2010-04-09 01:21:53 +00:00
spi-imx31.c Configure Gigabeat S with EABI compiler by default. Implement the INIT section that this enables (due to selective need for long calls). Remove pcm_postinit from INIT section since it's asynchronous. Disable strict aliasing on SPC codec for now just to shut it up. 2010-06-11 14:39:35 +00:00
spi-imx31.h Gigabeat S: Implement LCD contrast, invert and flip modes. Enhance LCD power management. Include init data but it's not needed yet (identical to Gigabeat F). 2010-05-18 23:50:00 +00:00