Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm/as3525
History
Rafaël Carré ad375c0bbc Revert r26937 (as3525v2: use 248MHz PLL) 
This caused mounting of µSD to fail on Fuzev2 in some cases, although
the card is detected properly
This might be the cause of playback glitches (more frequent for lossless
files) on clipv2
Trying to set the main PLL at 384MHz and FCLK at 240MHz didn't work, so
there might be some problems not understood yet

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26979 a1c6a512-1295-4272-9138-f99709370657
2010-06-20 02:01:03 +00:00
..
sansa-c200v2 Enable display and backlight on panic. 2010-06-18 13:45:24 +00:00
sansa-clip Enable display and backlight on panic. 2010-06-18 13:45:24 +00:00
sansa-clipplus Enable display and backlight on panic. 2010-06-18 13:45:24 +00:00
sansa-clipv2 Enable display and backlight on panic. 2010-06-18 13:45:24 +00:00
sansa-e200v2 Enable display and backlight on panic. 2010-06-18 13:45:24 +00:00
sansa-fuze Enable display and backlight on panic. 2010-06-18 13:45:24 +00:00
sansa-fuzev2 Enable display and backlight on panic. 2010-06-18 13:45:24 +00:00
sansa-m200v4 Enable display and backlight on panic. 2010-06-18 13:45:24 +00:00
adc-target.h
app.lds
ascodec-as3525.c as3525: cache first read of enrd0 register 2010-06-18 19:47:58 +00:00
ascodec-target.h as3525 ascodec: make internal functions statics and remove some details for ascodec-target.h header 2010-06-01 10:16:10 +00:00
audio-as3525.c as3525: fix r26308 2010-05-26 22:58:55 +00:00
backlight-e200v2-fuze.c
boot.lds as3525*: enable MMU in bootloader 2010-06-18 17:33:51 +00:00
button-e200v2-fuze.c
clock-target.h Revert r26937 (as3525v2: use 248MHz PLL) 2010-06-20 02:01:03 +00:00
dbop-as3525.c Move delay a bit in dbop_read_input for ams sansa targets using the DBOP port for button readout 2010-06-05 15:57:32 +00:00
dbop-as3525.h
debug-as3525.c as3525v2: document PLL bits and show current PLL frequency in the debug menu 2010-06-18 18:32:38 +00:00
debug-target.h
dma-pl081.c sd-as3525 was calling dma_release() without calling dma_retain() first, if 2010-06-17 19:14:42 +00:00
dma-target.h mark some functions as init functions (discarded after init() has run) 2010-05-27 12:00:29 +00:00
fmradio-i2c-as3525.c
i2s-as3525.c
kernel-as3525.c Restore return statement in kernel-as3525.c that was accidentally removed in r26330. This fixes c200v2 black screen. 2010-05-28 19:04:30 +00:00
lcd-as-e200v2-fuze-fuzev2.S FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
lcd-fuze.c Fuze: don't change gate scan position if lcd_set_flip() is not used 2010-05-29 17:40:37 +00:00
lcd-fuze.h Fuzev1/v2 : lcd_set_flip() 2010-05-29 13:43:18 +00:00
lcd-ssd1303.c
memory-init.S as3525*: enable MMU in bootloader 2010-06-18 17:33:51 +00:00
pcm-as3525.c pcm as3525v1: revert 26761 to use faster ASM code 2010-06-11 14:04:48 +00:00
power-as3525.c
powermgmt-target.h
scrollwheel-as3525.c
sd-as3525.c fix r26953: use physical address for DMA buffer, also for IRAM 2010-06-19 05:55:18 +00:00
sd-as3525v2.c fix r26953: use physical address for DMA buffer, also for IRAM 2010-06-19 05:55:18 +00:00
system-as3525.c With a max delay of 17 seconds before overflow happens limiting to unsigned short shouldn't be necessary. 2010-06-18 20:04:16 +00:00
system-target.h fix r26953: use physical address for DMA buffer, also for IRAM 2010-06-19 05:55:18 +00:00
timer-as3525.c
usb-as3525.c as3525: don't export empty usb_init_device(), declare it as empty inline 2010-05-27 12:00:18 +00:00
usb-drv-as3525.c Add mdelay 2010-06-19 02:34:56 +00:00
usb-drv-as3525.h as3525*: enable MMU in bootloader 2010-06-18 17:33:51 +00:00
usb-drv-as3525v2.c as3525v2-usb: fix yellow about unused functions (they can be resurrected from an older revision if needed) 2010-06-19 20:49:06 +00:00
usb-drv-as3525v2.h as3525v2-usb: remove useless macro 2010-06-19 20:40:16 +00:00
usb-target.h as3525: don't export empty usb_init_device(), declare it as empty inline 2010-05-27 12:00:18 +00:00