Michael Sevakis 9594f86c1a Gigabeat S: Use longer battery filter; lag is not a problem with voltage for charging since it's I-controlled. Initialize local copy of last_inputs for the power routines in target init otherwise the battery filter is reinitialized too soon. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26180 a1c6a512-1295-4272-9138-f99709370657		2010-05-19 23:39:59 +00:00
..
adc-gigabeat-s.c	i.MX31/Gigabeat S: Actually enable DPTC which can set optimal voltage for 528MHz. Requires an SPI and PMIC interface rework because of the low-latency needs for the DPTC to work best with minimal panicing. SPI can work with multitasking and asynchronously from interrupt handlers or normal code.	2010-05-04 10:07:53 +00:00
adc-target.h	Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.	2008-12-21 18:10:36 +00:00
audio-gigabeat-s.c	Gigabeat S: Switch SSI1 and 2 around so that playback can use the shared peripheral DMA with SSI2 which doesn't require use of the peripheral DMA unit-- SSI2 is mapped to the SDMA core address space. Fix some break keywords in get_script_pc(). Use the patched script for mcu_2_app (BSP appears to have neglected to update that). Use _SHP instead of _SP for shared peripheral constants (consistency).	2009-03-09 04:25:25 +00:00
backlight-gigabeat-s.c	i.MX31/Gigabeat S: Actually enable DPTC which can set optimal voltage for 528MHz. Requires an SPI and PMIC interface rework because of the low-latency needs for the DPTC to work best with minimal panicing. SPI can work with multitasking and asynchronously from interrupt handlers or normal code.	2010-05-04 10:07:53 +00:00
backlight-target.h	Gigabeat S: Turn off backlight LED supply after a 2-second delay and save a little power. Hardware fading required keeping supply enabled during fade out. Let fade happen at poweroff (might as well~~~).	2008-12-04 04:16:53 +00:00
button-gigabeat-s.c	Gigabeat S/i.MX31: Sort files in the /target tree into things that are SoC-generic (into /imx31) and player-specific (into /gigabeat-s, based upon current appearances). Move i2s clock init into the appropriate file. Housekeeping only-- no functional changes.	2010-04-09 01:21:53 +00:00
button-target.h	Remove some unused declarations	2009-05-21 12:32:26 +00:00
dvfs_dptc_tables-target.h	Changed a macro to a raw in int constant. Didn't mean to do that. Put it back right.	2010-05-06 03:30:59 +00:00
fmradio-i2c-gigabeat-s.c	i.MX31: Add some enums and a couple helper functions to make dealing with pin muxing and pad configuration a bit more sane. Convert any existing code which changes mux/pad settings to use helpers.	2010-04-23 13:46:04 +00:00
gpio-gigabeat-s.c	i.MX31/Gigabeat S minor cleaning: Make HW access more obvious in places I forgot to do earlier. Reduce the number of structs that need to be filled-out for some drivers just to simplify a little. Change some types.	2010-05-07 10:53:19 +00:00
gpio-target.h	i.MX31/Gigabeat S minor cleaning: Make HW access more obvious in places I forgot to do earlier. Reduce the number of structs that need to be filled-out for some drivers just to simplify a little. Change some types.	2010-05-07 10:53:19 +00:00
headphone-gigabeat-s.c	Increase stack space for the Gigabeat S specific headphone thread to fix stack overflow when compiled with gcc 4.4	2009-11-20 16:42:07 +00:00
i2s-gigabeat-s.c	Gigabeat S/i.MX31: Sort files in the /target tree into things that are SoC-generic (into /imx31) and player-specific (into /gigabeat-s, based upon current appearances). Move i2s clock init into the appropriate file. Housekeeping only-- no functional changes.	2010-04-09 01:21:53 +00:00
kernel-gigabeat-s.c	Gigabeat S: There's no compelling reason to start automatic scaling in the bootloader only stop it milliseconds later. Do init to default frequency and working point, however.	2010-05-06 04:17:34 +00:00
lcd-gigabeat-s.c	Gigabeat S: Wrong thing messing with IPU_CONF. No fiddling is needed just yet.	2010-05-19 00:42:55 +00:00
lcd-target.h	Updated our source code header to explicitly mention that we are GPL v2 or	2008-06-28 18:10:04 +00:00
mc13783-gigabeat-s.c	i.MX31/Gigabeat S minor cleaning: Make HW access more obvious in places I forgot to do earlier. Reduce the number of structs that need to be filled-out for some drivers just to simplify a little. Change some types.	2010-05-07 10:53:19 +00:00
mc13783-target.h	i.MX31/Gigabeat S minor cleaning: Make HW access more obvious in places I forgot to do earlier. Reduce the number of structs that need to be filled-out for some drivers just to simplify a little. Change some types.	2010-05-07 10:53:19 +00:00
pcm-gigabeat-s.c	PCM bottom layer simplification. pcm_rec_peak_addr variable no longer has to be handled there. Driver can just return current pointer for recording peaks. A new define, HAVE_PCM_REC_DMA_ADDRESS, specifies that physical addresses are being used for recording and translation is needed before starting a new block. The drivers need not worry about aligning start and size nor should care if either will be zero. All this will be checked in the logical layer first.	2010-05-12 14:05:36 +00:00
power-gigabeat-s.c	i.MX31/Gigabeat S: Implement frequency and voltage scaling-- 1.6V for 528MHz, and 1.35V for 264MHz and 132MHz. Keep DPTC overdrive ( > 400MHz) voltage scaling off for now because of uncertainties. Simplify the (working) mess later.	2010-04-23 15:32:50 +00:00
power-gigabeat-s.h	Gigabeat S/i.MX31: Sort files in the /target tree into things that are SoC-generic (into /imx31) and player-specific (into /gigabeat-s, based upon current appearances). Move i2s clock init into the appropriate file. Housekeeping only-- no functional changes.	2010-04-09 01:21:53 +00:00
powermgmt-gigabeat-s.c	Gigabeat S: Use longer battery filter; lag is not a problem with voltage for charging since it's I-controlled. Initialize local copy of last_inputs for the power routines in target init otherwise the battery filter is reinitialized too soon.	2010-05-19 23:39:59 +00:00
powermgmt-target.h	Gigabeat S: Use longer battery filter; lag is not a problem with voltage for charging since it's I-controlled. Initialize local copy of last_inputs for the power routines in target init otherwise the battery filter is reinitialized too soon.	2010-05-19 23:39:59 +00:00
system-gigabeat-s.c	i.MX31/Gigabeat S: Implement frequency and voltage scaling-- 1.6V for 528MHz, and 1.35V for 264MHz and 132MHz. Keep DPTC overdrive ( > 400MHz) voltage scaling off for now because of uncertainties. Simplify the (working) mess later.	2010-04-23 15:32:50 +00:00
system-target.h	i.MX31/Gigabeat S: Implement frequency and voltage scaling-- 1.6V for 528MHz, and 1.35V for 264MHz and 132MHz. Keep DPTC overdrive ( > 400MHz) voltage scaling off for now because of uncertainties. Simplify the (working) mess later.	2010-04-23 15:32:50 +00:00
timer-gigabeat-s.c	Gigabeat S/i.MX31: Sort files in the /target tree into things that are SoC-generic (into /imx31) and player-specific (into /gigabeat-s, based upon current appearances). Move i2s clock init into the appropriate file. Housekeeping only-- no functional changes.	2010-04-09 01:21:53 +00:00
usb-gigabeat-s.c	Gigabeat S/i.MX31: Sort files in the /target tree into things that are SoC-generic (into /imx31) and player-specific (into /gigabeat-s, based upon current appearances). Move i2s clock init into the appropriate file. Housekeeping only-- no functional changes.	2010-04-09 01:21:53 +00:00
usb-target.h	Remove some unused declarations	2009-05-21 12:32:26 +00:00
wmcodec-gigabeat-s.c	Gigabeat S/i.MX31: Sort files in the /target tree into things that are SoC-generic (into /imx31) and player-specific (into /gigabeat-s, based upon current appearances). Move i2s clock init into the appropriate file. Housekeeping only-- no functional changes.	2010-04-09 01:21:53 +00:00