rockbox/firmware/target/arm
Karl Kurbjun 449a7a6643 Cleanup some unneeded debug code.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17499 a1c6a512-1295-4272-9138-f99709370657
2008-05-14 00:32:43 +00:00
..
archos/av300 Moved archos power handling into target tree. * Tuner power handling cleaned up a bit. 2007-08-14 22:06:23 +00:00
imx31 Gigabeat S system setup changes. Unaligned loads/stores on. Mixed-endian support on. VIC on early. 2008-05-13 14:05:28 +00:00
ipod Undo r17470 because of regressions in some debug menus. 2008-05-12 15:37:03 +00:00
iriver H10: Disable IDE controller when the disk is powered down like on ipods. 2008-05-07 06:51:28 +00:00
olympus Make the H10 bootloader work again. Also fix the same problem that might be affecting other PP bootloaders. 2008-05-04 14:42:53 +00:00
pnx0101 Remove wrong usage of '.global'. These symbols are imported, not exported. 2008-04-29 06:47:34 +00:00
s3c2440 Cleanup some unneeded debug code. 2008-05-14 00:32:43 +00:00
sandisk Preparing for the Philips SA9200 part 1. Move the Sansa ADC & ATA drivers up one level. 2008-05-13 01:53:19 +00:00
tatung/tpj1022 Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled). 2008-03-26 01:50:41 +00:00
tcc77x Convert the TCC77x ADC driver to use interrupts - based on the technique used in the SH ADC driver. 2008-05-03 07:49:39 +00:00
tcc780x Remove the last D2 yellows (user timer is not yet implemented). 2008-05-05 19:43:01 +00:00
tms320dm320 Commit Zen Vision key patches by Falafel 2008-05-13 07:57:46 +00:00
adc-as3514.c Preparing for the Philips SA9200 part 1. Move the Sansa ADC & ATA drivers up one level. 2008-05-13 01:53:19 +00:00
adc-pp5020.c make mrobe100 work again 2008-02-10 16:06:01 +00:00
ata-as-arm.S 1) add support for ata-as-arm 2008-05-03 13:43:26 +00:00
ata-pp5002.c put back the PP5002 specific ATA code that got lost during the ipod target tree move 2006-11-08 12:34:21 +00:00
ata-pp5020.c Restore a line accidentally removed by r15705 2007-11-20 07:52:37 +00:00
ata-sd-pp.c Preparing for the Philips SA9200 part 2. Since the SA9200 doesn't have a microsd card (no hotswap), use HAVE_ATA_SD for the Sansa flash driver so we don't rely on HAVE_HOTSWAP in some places. 2008-05-13 02:50:31 +00:00
ata-sd-target.h Preparing for the Philips SA9200 part 2. Since the SA9200 doesn't have a microsd card (no hotswap), use HAVE_ATA_SD for the Sansa flash driver so we don't rely on HAVE_HOTSWAP in some places. 2008-05-13 02:50:31 +00:00
ata-target.h PP5002 ATA driver needs to wait for the controller to be ready again before writing the next control register value. Makes check_registers() not fail in the bootloader. 2007-08-03 09:34:42 +00:00
audio-pp.c Hopefully fix line-in recording on PortalPlayer targets (H10 in particular). 2007-11-11 23:41:54 +00:00
crt0-pp-bl.S Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all. 2007-11-27 01:20:26 +00:00
crt0-pp.S Remove wrong usage of '.global'. These symbols are imported, not exported. 2008-04-29 06:47:34 +00:00
ffs-arm.S Add a complete priority inheritance implementation to the scheduler (all mutex ownership and queue_send calls are inheritable). Priorities are differential so that dispatch depends on the runnable range of priorities. Codec priority can therefore be raised in small steps (pcmbuf updated to enable). Simplify the kernel functions to ease implementation and use the same kernel.c for both sim and target (I'm tired of maintaining two ;_). 1) Not sure if a minor audio break at first buffering issue will exist on large-sector disks (the main mutex speed issue was genuinely resolved earlier). At this point it's best dealt with at the buffering level. It seems a larger filechunk could be used again. 2) Perhaps 64-bit sims will have some minor issues (finicky) but a backroll of the code of concern there is a 5-minute job. All kernel objects become incompatible so a full rebuild and update is needed. 2008-03-25 02:34:12 +00:00
i2c-pp.c FS#8898 - Prefix AS3514 registers with AS3514_ 2008-04-15 21:33:32 +00:00
i2c-telechips.c Fixed prototype of i2c_write for plugins and for i2c-telechips (fix red/yellow). 2008-04-28 14:33:03 +00:00
i2s-pp.c Update source files to include the header file for the functions they implement, to make sure the header and the implementation is consistent (and fix it for a case where it wasn't). 2008-04-28 10:22:05 +00:00
lcd-as-memframe.S More M:Robe work including a fix to lcd-as-memframe for larger screens thanks to Michael Sevakis. Also fixes simulator builds. 2007-10-21 23:12:17 +00:00
memcpy-arm.S ARM optimised memcpy/memmove from glibc. This should give increased performance on all ARM targets, especially iPod 5G 2007-01-13 23:57:14 +00:00
memmove-arm.S ARM optimised memcpy/memmove from glibc. This should give increased performance on all ARM targets, especially iPod 5G 2007-01-13 23:57:14 +00:00
memset-arm.S Removed executable flag 2007-01-09 23:29:07 +00:00
memset16-arm.S Removed executable flag 2007-01-09 23:29:07 +00:00
mmu-arm.c Fix the ARM assembly to ensure that the stack is not used. 2008-05-10 18:30:46 +00:00
mmu-arm.h This is a big chunk of code necessary to prepare for Gigabeat F flash loading and and implementation of rolo. There should be no noticible changes for the user. A new bootloader is not needed. 2008-04-22 04:34:25 +00:00
pcm-pp.c Update source files to include the header file for the functions they implement, to make sure the header and the implementation is consistent (and fix it for a case where it wasn't). 2008-04-28 10:22:05 +00:00
system-arm.h Optimized byte-swapping macros for ARMv6. 2008-04-16 20:44:10 +00:00
system-pp502x.c Preparing for the Philips SA9200 part 2. Since the SA9200 doesn't have a microsd card (no hotswap), use HAVE_ATA_SD for the Sansa flash driver so we don't rely on HAVE_HOTSWAP in some places. 2008-05-13 02:50:31 +00:00
system-pp5002.c Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all. 2007-11-27 01:20:26 +00:00
system-target.h Fix freezing of some builds on PP5002. The PP5002 needs the not-sleep-at 0xNNNNNNN0-addresses fix everywhere when caching is enabled, not only in core_sleep(). Introduced a pair of inline functions to sleep and wake cores on PP for consistency. 2008-04-20 17:53:05 +00:00
usb-drv-arc.c Convert the whole codebase to UTF-8, except docs/COMMITTERS and tools/creative.c, which need checking. 2008-05-05 10:32:46 +00:00
usb-fw-pp502x.c Added missing usb #includes to usb source files. 2008-05-03 07:10:21 +00:00
usb-fw-pp5002.c FS #7691 - improved USB detection on PP devices. This patch modifies the target-tree function usb_detect() on all targets from bool to int, returning USB_INSERTED or USB_EXTRACTED instead of true or false. This was done to enable the PP usb_detect() to check for USB_POWER (either a connection to a USB wall charger, or the user holding "charge mode" button) and return that as a third value. 2007-09-04 08:03:07 +00:00
usb-target.h Fix USB detection on ipods and other portalplayer targets - Rockbox now correctly distinguishes between a USB connection to a computer and a connection to a USB AC charger. Based on the experimental USB code in FS #6494 by Barry Wardell. Closes FS #4724. 2007-02-04 21:46:01 +00:00
wmcodec-pp.c Do some crackdown on kernel object reinitialization after they could be in use and use before initialization. For c200/e200: Be sure fat cache and ata locks are acquired in the proper order during hot swapping. Delay hotswap monitoring until after initial file mounting (address 2nd kobj concern + possible call of fat driver before init). 2008-03-12 10:03:52 +00:00
wmcodec-telechips.c More static / header file cleanup. 2008-05-03 23:18:56 +00:00