rockbox/firmware/export/config-h100.h
Michael Sevakis d7e55278f3 Use HAVE_FLASHED_ROCKBOX when target is flashable. Currenly only used by the H100 series.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11470 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 18:33:06 +00:00

177 lines
4.8 KiB
C

#if defined(MEM) && (MEM > 16)
#error "re-run configure this just so wrong"
#endif
#define TARGET_TREE /* this target is using the target tree system */
/*
* This config file is for iriver iHP-100, iHP-110, iHP-115
*/
#define IRIVER_H100_SERIES 1
/* For Rolo and boot loader */
#define MODEL_NUMBER 1
/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP 1
/* define this if you can flip your LCD */
#define HAVE_LCD_FLIP
/* define this if you can invert the colours on your LCD */
#define HAVE_LCD_INVERT
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you have access to the pitchscreen */
#define HAVE_PITCHSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
/* LCD dimensions */
#define LCD_WIDTH 160
#define LCD_HEIGHT 128
#define LCD_DEPTH 2
#define LCD_PIXELFORMAT VERTICAL_PACKING
/* remote LCD */
#define LCD_REMOTE_WIDTH 128
#define LCD_REMOTE_HEIGHT 64
#define LCD_REMOTE_DEPTH 1
#define LCD_REMOTE_PIXELFORMAT VERTICAL_PACKING
#define CONFIG_KEYPAD IRIVER_H100_PAD
#define CONFIG_REMOTE_KEYPAD H100_REMOTE
/* Define this if you do software codec */
#define CONFIG_CODEC SWCODEC
/* Define this if you have an remote lcd */
#define HAVE_REMOTE_LCD
#define CONFIG_LCD LCD_S1D15E06
#define DEFAULT_REMOTE_CONTRAST_SETTING 42
/* Define this for LCD backlight available */
#define CONFIG_BACKLIGHT BL_IRIVER_H100 /* port controlled */
/* We can fade the backlight by using PWM */
#define HAVE_BACKLIGHT_PWM_FADING
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x80000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x80000
#define BATTERY_CAPACITY_DEFAULT 1300 /* default battery capacity */
#define AB_REPEAT_ENABLE 1
#define CONFIG_TUNER TEA5767
#define CONFIG_TUNER_XTAL 32768
#define HAVE_UDA1380
/* define this if you have recording possibility */
#define HAVE_RECORDING 1
/* define hardware samples rate caps mask */
#define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
/* define the bitmask of recording sample rates */
#define REC_SAMPR_CAPS (SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
#define HAVE_AGC
#ifndef SIMULATOR
/* Define this if you have a Motorola SCF5249 */
#define CONFIG_CPU MCF5249
/* Define this if you want to use coldfire's i2c interface */
#define CONFIG_I2C I2C_COLDFIRE
/* Define this if you can run rockbox from flash memory */
#define HAVE_FLASHED_ROCKBOX
/* Define if we have a hardware defect that causes ticking on the audio line */
#define HAVE_REMOTE_LCD_TICKING
/* Type of mobile power */
#define CONFIG_BATTERY BATT_LIPOL1300
#define BATTERY_CAPACITY_MIN 1300 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 50 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
#define BATTERY_SCALE_FACTOR 16665 /* FIX: this value is picked at random */
/* Hardware controlled charging */
//#define CONFIG_CHARGING CHARGING_SIMPLE
#define CONFIG_CHARGING CHARGING_MONITOR /* FIXME: remove that once monitoring is fixed properly */
/* define this if the hardware can be powered off while charging */
#define HAVE_POWEROFF_WHILE_CHARGING
/* The size of the flash ROM */
#define FLASH_SIZE 0x200000
/* Define this to the CPU frequency */
#define CPU_FREQ 11289600
/* Define this if you have ATA power-off control */
#define HAVE_ATA_POWER_OFF
/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC 0
/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 8
#define USB_IRIVERSTYLE
#define HAVE_ATA_LED_CTRL
/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ
#define BOOTFILE_EXT "iriver"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTLOADER_ENTRYPOINT 0x001F0000
#define FLASH_ENTRYPOINT 0x00001000
#define FLASH_MAGIC 0xfbfbfbf1
/* Define this if there is an EEPROM chip */
/* Someone with H100 and BDM, please verify if this works. */
/* #define HAVE_EEPROM */
#endif /* !SIMULATOR */
#define DEFAULT_CONTRAST_SETTING 40
#define MIN_CONTRAST_SETTING 5
#define MAX_CONTRAST_SETTING 63
#define DEFAULT_REMOTE_CONTRAST_SETTING 42
#define MIN_REMOTE_CONTRAST_SETTING MIN_CONTRAST_SETTING
#define MAX_REMOTE_CONTRAST_SETTING MAX_CONTRAST_SETTING
/* Define this for S/PDIF input available */
#define HAVE_SPDIF_IN
/* Define this for S/PDIF output available */
#define HAVE_SPDIF_OUT
/* Define this if you can control the S/PDIF power */
#define HAVE_SPDIF_POWER
#define SPDIF_POWER_INVERTED
/* Define this for FM radio input available */
#define HAVE_FMRADIO_IN