| .. |
|
adc.h
|
Target tree support for Iriver iFP.
|
2006-11-09 22:58:35 +00:00 |
|
ata.h
|
* changes to ata.c - idle callbacks are called after 2 sec of real idle,
|
2006-11-08 01:55:26 +00:00 |
|
ata_idle_notify.h
|
fixed once again.
|
2006-11-08 03:19:53 +00:00 |
|
ata_mmc.h
|
|
|
|
audio.h
|
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
|
2006-11-06 18:07:30 +00:00 |
|
backlight.h
|
|
|
|
bidi.h
|
|
|
|
bitswap.h
|
|
|
|
buffer.h
|
|
|
|
button.h
|
Target tree support for Iriver iFP.
|
2006-11-09 22:58:35 +00:00 |
|
config-e200.h
|
Correct LCD pixel format on Sansa E200
|
2006-10-26 20:01:04 +00:00 |
|
config-fmrecorder.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-gigabeat.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-gmini120.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-gminisp.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-h10.h
|
Fixed H10 build.
|
2006-11-09 22:33:24 +00:00 |
|
config-h10_5gb.h
|
Fixed H10 build.
|
2006-11-09 22:33:24 +00:00 |
|
config-h100.h
|
Use HAVE_FLASHED_ROCKBOX when target is flashable. Currenly only used by the H100 series.
|
2006-11-08 18:33:06 +00:00 |
|
config-h120.h
|
Use HAVE_FLASHED_ROCKBOX when target is flashable. Currenly only used by the H100 series.
|
2006-11-08 18:33:06 +00:00 |
|
config-h300.h
|
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
|
2006-11-06 18:07:30 +00:00 |
|
config-iaudiox5.h
|
Bugfix: X5 simulator now simulates the RTC.
|
2006-11-08 20:52:30 +00:00 |
|
config-ifp7xx.h
|
Target tree support for Iriver iFP.
|
2006-11-09 22:58:35 +00:00 |
|
config-ipod3g.h
|
Added macros controlling what goes to IRAM on different targets.
|
2006-11-09 21:59:27 +00:00 |
|
config-ipod4g.h
|
Added macros controlling what goes to IRAM on different targets.
|
2006-11-09 21:59:27 +00:00 |
|
config-ipodcolor.h
|
Added macros controlling what goes to IRAM on different targets.
|
2006-11-09 21:59:27 +00:00 |
|
config-ipodmini.h
|
Added macros controlling what goes to IRAM on different targets.
|
2006-11-09 21:59:27 +00:00 |
|
config-ipodmini2g.h
|
Added macros controlling what goes to IRAM on different targets.
|
2006-11-09 21:59:27 +00:00 |
|
config-ipodnano.h
|
Added macros controlling what goes to IRAM on different targets.
|
2006-11-09 21:59:27 +00:00 |
|
config-ipodvideo.h
|
Added macros controlling what goes to IRAM on different targets.
|
2006-11-09 21:59:27 +00:00 |
|
config-ondiofm.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-ondiosp.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-player.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-recorder.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-recorderv2.h
|
ifdef all the tagcache code, allows rombox to be compiled again, Thanks Austin Appel
|
2006-10-25 10:17:57 +00:00 |
|
config-tpj1022.h
|
Initial commit of work for port to the Tatung Elio TPJ-1022 - yet another PortalPlayer PP5020 target.
|
2006-08-31 19:19:35 +00:00 |
|
config.h
|
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES.
|
2006-11-08 16:13:04 +00:00 |
|
cpu.h
|
|
|
|
debug.h
|
|
|
|
disk.h
|
|
|
|
eeprom_24cxx.h
|
|
|
|
eeprom_settings.h
|
|
|
|
enc_base.h
|
Forgot to use cvs add on a few new files in the fresh checkout I used. woops.
|
2006-11-06 18:18:05 +00:00 |
|
fat.h
|
|
|
|
fmradio.h
|
|
|
|
fmradio_i2c.h
|
|
|
|
font.h
|
|
|
|
gdb_api.h
|
|
|
|
general.h
|
Forgot to use cvs add on a few new files in the fresh checkout I used. woops.
|
2006-11-06 18:18:05 +00:00 |
|
generic_i2c.h
|
|
|
|
hangul.h
|
|
|
|
hwcompat.h
|
|
|
|
i2c-coldfire.h
|
|
|
|
i2c-pp5002.h
|
Renamed the ipod_i2c functions to the more appropriate pp_i2c
|
2006-10-27 11:24:23 +00:00 |
|
i2c-pp5020.h
|
Renamed the ipod_i2c functions to the more appropriate pp_i2c
|
2006-10-27 11:24:23 +00:00 |
|
i2c.h
|
|
|
|
id3.h
|
AIFF is not (yet) a supported format on HWCODEC targets.
|
2006-11-06 19:49:05 +00:00 |
|
isp1362.h
|
|
|
|
kernel.h
|
Patch #6052 - More responsive skip on Archos
|
2006-10-19 11:43:13 +00:00 |
|
lcd-player-charset.h
|
|
|
|
lcd-remote.h
|
Removed remnants of deprecated lcd_roll().
|
2006-10-31 19:49:35 +00:00 |
|
lcd.h
|
Removed remnants of deprecated lcd_roll().
|
2006-10-31 19:49:35 +00:00 |
|
led.h
|
|
|
|
logf.h
|
|
|
|
m5636.h
|
|
|
|
mas.h
|
|
|
|
mcf5249.h
|
H300: (1) Use DMA for LCD updates, with auto-aligned line reads. Speeds up LCD updates by ~ 75% at 11MHz and 45MHz. Only ~ 11% speedup at 124MHz due to (2). (2) Less aggressive LCD transfer timing at 124MHz. With the previous timing, slightly corrupted display contents was reported, and with DMA transfers at least 4 waitstates are needed to make updates work at all. * A table in system-iriver.c shows settings for all integer multiples of the base clock frequency (info for developers, not yet complete).
|
2006-11-02 20:50:50 +00:00 |
|
mcf5250.h
|
|
|
|
mp3_playback.h
|
|
|
|
mp3data.h
|
|
|
|
mpeg.h
|
|
|
|
panic.h
|
|
|
|
pcf50605.h
|
|
|
|
pcf50606.h
|
Moved pcf50606 stuff to target directory.
|
2006-10-25 23:24:07 +00:00 |
|
pcm_playback.h
|
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
|
2006-11-06 18:07:30 +00:00 |
|
pcm_record.h
|
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
|
2006-11-06 18:07:30 +00:00 |
|
pcm_sampr.h
|
Forgot to use cvs add on a few new files in the fresh checkout I used. woops.
|
2006-11-06 18:18:05 +00:00 |
|
pnx0101.h
|
|
|
|
power.h
|
|
|
|
powermgmt.h
|
General: changed local adc to voltage conversions in several places to use battery_voltage. Added battery_read_info function for unfiltered battery information. x5: removed adc_read as a distinct function. Removed adc tick task. adc_init is empty inline. Adjusted battery scale, voltage to level array and read 10 bits from the ADC for battery since 255 levels is not enough for true centivolt resolution.
|
2006-10-30 11:33:38 +00:00 |
|
pp5002.h
|
|
|
|
pp5020.h
|
|
|
|
pp5024.h
|
|
|
|
profile.h
|
|
|
|
replaygain.h
|
|
|
|
rolo.h
|
|
|
|
rtc.h
|
|
|
|
s3c2440.h
|
fix typo
|
2006-11-05 07:55:00 +00:00 |
|
serial.h
|
Logf output on the serial port for h100 targets
|
2006-10-12 20:22:16 +00:00 |
|
sh7034.h
|
|
|
|
sound.h
|
|
|
|
system.h
|
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
|
2006-11-06 18:07:30 +00:00 |
|
tcc730.h
|
|
|
|
thread.h
|
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
|
2006-11-06 18:07:30 +00:00 |
|
timer.h
|
|
|
|
tlv320.h
|
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
|
2006-11-06 18:07:30 +00:00 |
|
tuner.h
|
|
|
|
uda1380.h
|
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
|
2006-11-06 18:07:30 +00:00 |
|
usb.h
|
|
|
|
usb_serial.h
|
|
|
|
wm8731l.h
|
|
|
|
wm8758.h
|
|
|
|
wm8975.h
|
|
|
|
wmcodec.h
|
generalise the wolfson codec code a bit
|
2006-10-20 17:12:42 +00:00 |
6e992abf36