| .. |
|
adc-imx31.c
|
Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.
|
2008-12-21 18:10:36 +00:00 |
|
adc-target.h
|
Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.
|
2008-12-21 18:10:36 +00:00 |
|
ata-imx31.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
ata-target.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
audio-gigabeat-s.c
|
Gigabeat S: Allow recording from FM. Give FM the same volume range as playback. NOTE: This bumps the si4700 output volume to -0dB so other players with that may need a minor adjustment.
|
2008-12-31 01:38:44 +00:00 |
|
avic-imx31.c
|
Gigabeats S: Simply ignore that occasional spurious unknown IRQ (-1) that goes through irq_handler even if the AVIC is used. If no pending interrupt is indicated (anything else should be vectored), simply returning from the handler appears to have no ill effect. The cause for entering irq_handler is unknown for now (or I missed something important :\).
|
2008-11-27 11:49:49 +00:00 |
|
avic-imx31.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
backlight-imx31.c
|
Gigabeat S: Turn off backlight LED supply after a 2-second delay and save a little power. Hardware fading required keeping supply enabled during fade out. Let fade happen at poweroff (might as well~~~).
|
2008-12-04 04:16:53 +00:00 |
|
backlight-target.h
|
Gigabeat S: Turn off backlight LED supply after a 2-second delay and save a little power. Hardware fading required keeping supply enabled during fade out. Let fade happen at poweroff (might as well~~~).
|
2008-12-04 04:16:53 +00:00 |
|
button-imx31.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
button-target.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
clkctl-imx31.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
clkctl-imx31.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
dma_start.c
|
|
|
|
fmradio-i2c-gigabeat-s.c
|
Make si4700 tuner driver more sane with bit and field defines and entirely hide strange i2c interface from code with write/set/clear/masked functionality. On Gigabeat S use by-the-book busmode selection and GPIO lines. Implement some primitive station detection, debug registers in screen, and misc. changes to tie things together.
|
2008-12-27 19:18:50 +00:00 |
|
gpio-gigabeat-s.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
gpio-imx31.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
gpio-imx31.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
gpio-target.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2c-imx31.c
|
imx31: Fix a couple small problems with the i2c driver that went unnoticed until FM. Reset addr_count always and stop resetting module before STOP is actually generated. Simplify a tiny bit and remove inactive preprocessor block.
|
2008-12-26 16:06:40 +00:00 |
|
i2c-imx31.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2s-imx31.c
|
Fix missing #includes and make local functions static for gigabeat
|
2008-07-18 23:28:54 +00:00 |
|
kernel-imx31.c
|
Strange little kernel optimization to ease targeting the timer tick and to limit the number of loops in the tick function to the number of tasks added rather than always looping the max number.
|
2008-10-27 16:30:24 +00:00 |
|
lcd-imx31.c
|
Fix FS#9782 - lcd_bitmap_transparent_part clipping but keep smaller clipping code. The bitmap coordinates were not being adjusted when clipping left and top. Also fix for Gigabeat S.
|
2009-01-12 02:15:04 +00:00 |
|
lcd-target.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mc13783-gigabeat-s.c
|
Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.
|
2008-12-21 18:10:36 +00:00 |
|
mc13783-imx31.c
|
Fix red and a couple other things I somehow missed.
|
2008-12-10 09:11:43 +00:00 |
|
mc13783-target.h
|
Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.
|
2008-12-21 18:10:36 +00:00 |
|
mmu-imx31.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mmu-imx31.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pcm-imx31.c
|
Hehe. Broke it already in last-second sanitation. Put some bits back.
|
2008-12-31 01:54:26 +00:00 |
|
power-imx31.c
|
Make si4700 tuner driver more sane with bit and field defines and entirely hide strange i2c interface from code with write/set/clear/masked functionality. On Gigabeat S use by-the-book busmode selection and GPIO lines. Implement some primitive station detection, debug registers in screen, and misc. changes to tie things together.
|
2008-12-27 19:18:50 +00:00 |
|
power-imx31.h
|
Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.
|
2008-12-21 18:10:36 +00:00 |
|
powermgmt-imx31.c
|
Gigabeat S: Make sure USB battery maintenece is engaged if fully charged from Main (charger off), USB is configured and Main is unplugged.
|
2009-01-10 02:37:44 +00:00 |
|
powermgmt-target.h
|
Gigabeat S: Fix a divide by zero in runtime estimation caused by using actual charger current. Use default constant for now.
|
2008-12-24 23:54:57 +00:00 |
|
serial-imx31.h
|
Hopefully fix read.
|
2008-12-25 03:23:22 +00:00 |
|
spi-imx31.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
spi-imx31.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
system-imx31.c
|
Clean up panicf and introduce system_exception_wait to do further target tasks and wait for a button when an unrecoverable error has occurred (panic, UIE, etc.). Returning from that function should reboot or don't return from it. Move UIE and __div0 for ARM to its own file.
|
2009-01-08 10:15:32 +00:00 |
|
system-target.h
|
USB detection changes. c200/e200: Consider USB to be powered when charger is plugged but detect USB connection by bus reset. When received, disconnect and restart the driver fully enabled. imx31: Fix hack used to make initial connect succeeded-- set PHY type before initial reset. General: Move some target code out of usb-drv-arc.c and implement it in respective usb sources and CPU headers so things stay clean.
|
2009-01-19 13:41:25 +00:00 |
|
timer-imx31.c
|
Update copyright headers for 2009 since they're new files.
|
2009-01-05 00:06:45 +00:00 |
|
timer-target.h
|
Update copyright headers for 2009 since they're new files.
|
2009-01-05 00:06:45 +00:00 |
|
usb-imx31.c
|
USB detection changes. c200/e200: Consider USB to be powered when charger is plugged but detect USB connection by bus reset. When received, disconnect and restart the driver fully enabled. imx31: Fix hack used to make initial connect succeeded-- set PHY type before initial reset. General: Move some target code out of usb-drv-arc.c and implement it in respective usb sources and CPU headers so things stay clean.
|
2009-01-19 13:41:25 +00:00 |
|
usb-target.h
|
Gigabeat S has no need for a USB tick. Put in a simple framework that allows USB monitoring by event. Also add a couple missed usb_enable calls when the connection is not for 'slave mode'.
|
2009-01-14 07:01:49 +00:00 |
|
wmcodec-imx31.c
|
Use set/clr instead of mod functions where applicable.
|
2008-12-19 15:30:30 +00:00 |
616c98b38f