..
sansa-c200v2
Added battery profile change to correct file, removed unused powermgmt-as3525.c
2010-04-08 19:31:03 +00:00
sansa-clip
Port greylib blitting optimisation to clipv1.
2010-06-04 21:12:06 +00:00
sansa-clipplus
Port greylib blitting optimisation to clipv2 and Clip+. Actual speedup can't be measured because something is fishy with the cpu clocking (calculated load is negative??)
2010-06-04 23:12:33 +00:00
sansa-clipv2
Port greylib blitting optimisation to clipv2 and Clip+. Actual speedup can't be measured because something is fishy with the cpu clocking (calculated load is negative??)
2010-06-04 23:12:33 +00:00
sansa-e200v2
e200v2: revert r26353
2010-05-29 14:24:10 +00:00
sansa-fuze
Merge common LCD code between fuzev1 & fuzev2
2010-05-27 23:32:38 +00:00
sansa-fuzev2
Merge common LCD code between fuzev1 & fuzev2
2010-05-27 23:32:38 +00:00
sansa-m200v4
Sansa Clip & m200v4 : calls backlight_hold_changed() when hold button is toggled
2009-08-15 15:02:51 +00:00
adc-target.h
Sansa AMS: use the AS3514 ADC driver
2008-11-10 20:55:56 +00:00
app.lds
Revert unrelated part of r25491 : fuzev1 init code works again
2010-04-06 10:21:58 +00:00
ascodec-as3525.c
as3525 ascodec: make internal functions statics and remove some details for ascodec-target.h header
2010-06-01 10:16:10 +00:00
ascodec-target.h
as3525 ascodec: make internal functions statics and remove some details for ascodec-target.h header
2010-06-01 10:16:10 +00:00
audio-as3525.c
as3525: fix r26308
2010-05-26 22:58:55 +00:00
backlight-e200v2-fuze.c
FS#10306 by Thomas Martitz : button light doesn't change on SD transfers on Sansa AMS (Fuze & e200v2)
2009-06-18 22:33:02 +00:00
boot.lds
Fix a bunch of boot.lds files so that they build with newer ld. The stack/bss sections need NOLOAD. otherwise the linker would try to include those into the binary. I don't know why this ever worked with our current ld version.
2010-03-08 23:16:57 +00:00
button-e200v2-fuze.c
Fuzev2: Scrollwheel works like a charm :)
2010-04-01 16:07:56 +00:00
clock-target.h
Revert part of r25489 as it didn't fix the problem, that the CPU frequency debug screen shows the wrong frequency after boot, properly.
2010-04-05 19:20:56 +00:00
dbop-as3525.c
Move delay a bit in dbop_read_input for ams sansa targets using the DBOP port for button readout
2010-06-05 15:57:32 +00:00
dbop-as3525.h
Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now).
2010-01-07 22:21:41 +00:00
debug-as3525.c
as3525v2: show adc channels in the debug menu
2010-05-18 20:01:49 +00:00
debug-target.h
Some Sansa Fuze work: Get Home button working (no keymap changes yet, so it's not very noticeable) and "fix" debug menu from not showing the dbop data (see FIXME), some cleanup in the fuze's button driver
2009-02-17 02:36:48 +00:00
dma-pl081.c
Sansa AMSv2: Do not disable DMA synchronization logic for as3525v2. The DMA controller and the SD controller run at different clock speeds.
2010-04-08 06:12:51 +00:00
dma-target.h
mark some functions as init functions (discarded after init() has run)
2010-05-27 12:00:29 +00:00
fmradio-i2c-as3525.c
Fuzev2: don't disable interrupts in fm code, allow button tick to run
2010-05-05 04:13:15 +00:00
i2s-as3525.c
Fix Clip firmware building by adding missing symbols
2008-11-10 11:04:43 +00:00
kernel-as3525.c
Restore return statement in kernel-as3525.c that was accidentally removed in r26330. This fixes c200v2 black screen.
2010-05-28 19:04:30 +00:00
lcd-as-e200v2-fuze-fuzev2.S
fuze*/e200v2 YUV lcd code: remove a useless instruction forgotten in r21795
2010-05-29 22:42:54 +00:00
lcd-fuze.c
Fuze: don't change gate scan position if lcd_set_flip() is not used
2010-05-29 17:40:37 +00:00
lcd-fuze.h
Fuzev1/v2 : lcd_set_flip()
2010-05-29 13:43:18 +00:00
lcd-ssd1303.c
as2525(v2): We don't need yuv blitting/greylib support in the bootloader so don't compile it.
2010-04-05 12:17:11 +00:00
pcm-as3525.c
Using void instead of unsigned char fixes the strict-aliasing warnings with -Os and gets rid of some casts. And we already use void pointer arithmetic in several other places.
2010-06-03 18:29:06 +00:00
power-as3525.c
as3525v2: RTC alarm
2010-05-22 00:28:03 +00:00
powermgmt-target.h
Clip+: add charging curve
2010-05-21 12:48:15 +00:00
scrollwheel-as3525.c
Fix someone elses yellow and red
2010-04-02 01:41:51 +00:00
sd-as3525.c
Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix.
2010-06-06 13:20:47 +00:00
sd-as3525v2.c
sd-as3525v2: check the (supposedly) card data line for business when writing
2010-06-06 13:47:30 +00:00
system-as3525.c
as3525: write irq/fiq handlers in C
2010-05-26 16:03:01 +00:00
system-target.h
as3525: hide our UNCACHED_ADDR from usb_storage.c
2010-05-19 18:13:06 +00:00
timer-as3525.c
Sansa AMS: VIC_INT_ENABLE register is not a mask
2009-11-24 12:05:53 +00:00
usb-as3525.c
as3525: don't export empty usb_init_device(), declare it as empty inline
2010-05-27 12:00:18 +00:00
usb-drv-as3525.c
Prevent a race condition when writing VIC_INT_EN_CLEAR. Should be very difficult to hit in this case though...
2010-06-01 19:29:01 +00:00
usb-drv-as3525v2.c
usb-as3525v2:
2010-05-20 14:54:32 +00:00
usb-drv-as3525v2.h
usb-as3525v2: fix typo in a comment.
2010-05-21 08:36:39 +00:00
usb-target.h
as3525: don't export empty usb_init_device(), declare it as empty inline
2010-05-27 12:00:18 +00:00
5c9e76a1e0