Michael Sevakis a2b6703a36 Commit FS#12150 - Fully-functional audio mixer - and finally whip old limitations about playback of voice and other sounds when paused. Channels are independent in state and amplitude. Fade on stop/pause is handled by the channel's volume control rather than global volume which means it now works from anywhere. Opens up the possibility of plugin sounds during music playback by merely adding an additional channel enum. If any PCM drivers were not properly modified, see one of the last comments in the task for a description of the simple change that is expected. Some params are tunable in firmware/export/pcm-mixer.h as well. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30097 a1c6a512-1295-4272-9138-f99709370657		2011-06-29 06:37:04 +00:00
..
adc-gigabeat-s.c	Merge functionality of wakeups and semaphores-- fewer APIs and object types. semaphore_wait takes a timeout now so codecs and plugins have to be made incompatible. Don't make semaphores for targets not using them.	2011-03-02 08:49:38 +00:00
adc-target.h
audio-gigabeat-s.c	Gigabeat S: Turn off hardware effects (tone and 3d) when doing digital loopback for FM recording otherwise the signal and levels are poorly represented in monitoring (can't just do ADC->DAC for general FM and get voice too). Some tweaking to input setup to improve gain a tiny bit. A little bit quieter startup too.	2010-05-26 05:13:45 +00:00
backlight-gigabeat-s.c
backlight-target.h
button-gigabeat-s.c	Gigabeat S: Do simple direct keypad scanning rather than triggering a separate scan interrupt and it all does the same thing but with 1 tick less latency.	2010-12-29 18:20:31 +00:00
button-target.h
dvfs_dptc_tables-target.h	i.MX31: Add a debug menu to play around with DVFS/DPTC settings for fun, testing or benchmarking purposes. Can set the CPU frequency working point, whether DPTC voltage scaling is enabled and change the software-programmable load tracking weights.	2011-01-22 16:58:17 +00:00
fmradio-i2c-gigabeat-s.c	Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout.	2010-06-30 02:02:46 +00:00
gpio-gigabeat-s.c	i.MX31/Gigabeat S minor cleaning: Make HW access more obvious in places I forgot to do earlier. Reduce the number of structs that need to be filled-out for some drivers just to simplify a little. Change some types.	2010-05-07 10:53:19 +00:00
gpio-target.h	i.MX31/Gigabeat S minor cleaning: Make HW access more obvious in places I forgot to do earlier. Reduce the number of structs that need to be filled-out for some drivers just to simplify a little. Change some types.	2010-05-07 10:53:19 +00:00
headphone-gigabeat-s.c	Merge functionality of wakeups and semaphores-- fewer APIs and object types. semaphore_wait takes a timeout now so codecs and plugins have to be made incompatible. Don't make semaphores for targets not using them.	2011-03-02 08:49:38 +00:00
i2s-gigabeat-s.c	Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout.	2010-06-30 02:02:46 +00:00
kernel-gigabeat-s.c	i.MX31: Now that it matters because there's a debug screeen that allows changing things while running, some DVFS/DPTC stuff has to be done more carefully. Trim out some stuff and group functions better as well.	2011-01-23 20:21:35 +00:00
lcd-gigabeat-s.c	Gigabeat S: Keep LCD options in sync even when display is turned off.	2011-01-22 22:48:43 +00:00
lcd-target.h
mc13783-gigabeat-s.c	i.MX31/Gigabeat S minor cleaning: Make HW access more obvious in places I forgot to do earlier. Reduce the number of structs that need to be filled-out for some drivers just to simplify a little. Change some types.	2010-05-07 10:53:19 +00:00
mc13783-target.h	i.MX31/Gigabeat S minor cleaning: Make HW access more obvious in places I forgot to do earlier. Reduce the number of structs that need to be filled-out for some drivers just to simplify a little. Change some types.	2010-05-07 10:53:19 +00:00
pcm-gigabeat-s.c	Commit FS#12150 - Fully-functional audio mixer - and finally whip old limitations about playback of voice and other sounds when paused. Channels are independent in state and amplitude. Fade on stop/pause is handled by the channel's volume control rather than global volume which means it now works from anywhere. Opens up the possibility of plugin sounds during music playback by merely adding an additional channel enum. If any PCM drivers were not properly modified, see one of the last comments in the task for a description of the simple change that is expected. Some params are tunable in firmware/export/pcm-mixer.h as well.	2011-06-29 06:37:04 +00:00
power-gigabeat-s.c	i.MX31: Now that it matters because there's a debug screeen that allows changing things while running, some DVFS/DPTC stuff has to be done more carefully. Trim out some stuff and group functions better as well.	2011-01-23 20:21:35 +00:00
power-gigabeat-s.h
powermgmt-gigabeat-s.c	Change the thread api a bit.	2011-03-05 17:48:06 +00:00
powermgmt-target.h	Gigabeat S: Use longer battery filter; lag is not a problem with voltage for charging since it's I-controlled. Initialize local copy of last_inputs for the power routines in target init otherwise the battery filter is reinitialized too soon.	2010-05-19 23:39:59 +00:00
system-gigabeat-s.c	i.MX31: Now that it matters because there's a debug screeen that allows changing things while running, some DVFS/DPTC stuff has to be done more carefully. Trim out some stuff and group functions better as well.	2011-01-23 20:21:35 +00:00
system-target.h	Better boost calculation for multifrequency CPUs. Frequencies between minimum and maximum count as fractional boost.	2011-01-22 18:30:24 +00:00
timer-gigabeat-s.c
usb-gigabeat-s.c	Gigabeat S: Make it a removable mass-storage device. Windows will assign a drive to only the main data partition by default. To access the bootloader partition instead, press 'Vol -' while it connects (in bootloader and firmware). Hopefully doesn't break anything for anyone.	2011-01-05 19:35:51 +00:00
usb-target.h	Gigabeat S: Make it a removable mass-storage device. Windows will assign a drive to only the main data partition by default. To access the bootloader partition instead, press 'Vol -' while it connects (in bootloader and firmware). Hopefully doesn't break anything for anyone.	2011-01-05 19:35:51 +00:00
wmcodec-gigabeat-s.c	Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout.	2010-06-30 02:02:46 +00:00