Michael Sevakis 5667682dd2 Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19547 a1c6a512-1295-4272-9138-f99709370657		2008-12-21 18:10:36 +00:00
..
adc-imx31.c	Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.	2008-12-21 18:10:36 +00:00
adc-target.h	Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.	2008-12-21 18:10:36 +00:00
ata-imx31.c
ata-target.h
audio-gigabeat-s.c	FS#9609 FM radio support for the Gigabeat S, seeking/scanning is not yet	2008-12-09 20:48:04 +00:00
avic-imx31.c	Gigabeats S: Simply ignore that occasional spurious unknown IRQ (-1) that goes through irq_handler even if the AVIC is used. If no pending interrupt is indicated (anything else should be vectored), simply returning from the handler appears to have no ill effect. The cause for entering irq_handler is unknown for now (or I missed something important :\).	2008-11-27 11:49:49 +00:00
avic-imx31.h
backlight-imx31.c	Gigabeat S: Turn off backlight LED supply after a 2-second delay and save a little power. Hardware fading required keeping supply enabled during fade out. Let fade happen at poweroff (might as well~~~).	2008-12-04 04:16:53 +00:00
backlight-target.h	Gigabeat S: Turn off backlight LED supply after a 2-second delay and save a little power. Hardware fading required keeping supply enabled during fade out. Let fade happen at poweroff (might as well~~~).	2008-12-04 04:16:53 +00:00
button-imx31.c
button-target.h
clkctl-imx31.c
clkctl-imx31.h
dma_start.c
fmradio-i2c-gigabeat-s.c	FS#9609 FM radio support for the Gigabeat S, seeking/scanning is not yet	2008-12-09 20:48:04 +00:00
gpio-gigabeat-s.c
gpio-imx31.c
gpio-imx31.h
gpio-target.h
i2c-imx31.c
i2c-imx31.h
i2s-imx31.c
kernel-imx31.c	Strange little kernel optimization to ease targeting the timer tick and to limit the number of loops in the tick function to the number of tasks added rather than always looping the max number.	2008-10-27 16:30:24 +00:00
lcd-imx31.c	Gigabeat S: Turn off backlight LED supply after a 2-second delay and save a little power. Hardware fading required keeping supply enabled during fade out. Let fade happen at poweroff (might as well~~~).	2008-12-04 04:16:53 +00:00
lcd-target.h
mc13783-gigabeat-s.c	Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.	2008-12-21 18:10:36 +00:00
mc13783-imx31.c	Fix red and a couple other things I somehow missed.	2008-12-10 09:11:43 +00:00
mc13783-target.h	Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.	2008-12-21 18:10:36 +00:00
mmu-imx31.c
mmu-imx31.h
pcm-imx31.c	Use set/clr instead of mod functions where applicable.	2008-12-19 15:30:30 +00:00
power-imx31.c	Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.	2008-12-21 18:10:36 +00:00
power-imx31.h	Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.	2008-12-21 18:10:36 +00:00
powermgmt-imx31.c	Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.	2008-12-21 18:10:36 +00:00
powermgmt-target.h	Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.	2008-12-21 18:10:36 +00:00
serial-imx31.h
spi-imx31.c
spi-imx31.h
system-imx31.c	Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.	2008-12-21 18:10:36 +00:00
system-target.h	Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.	2008-12-21 18:10:36 +00:00
usb-imx31.c	Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.	2008-12-21 18:10:36 +00:00
usb-target.h
wmcodec-imx31.c	Use set/clr instead of mod functions where applicable.	2008-12-19 15:30:30 +00:00