Jens Arnold 837012be86 Fix graphical glitches occuring in the greyscale library on H1x0 and M5 at 124MHz. The main loop within lcd_grey_data() needed instruction reordering (interspersing lcd writes with memory accesses) to meed the LCD controller timing. Slight slowdown because of the extra register needed. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16091 a1c6a512-1295-4272-9138-f99709370657		2008-01-15 00:51:58 +00:00
..
m5	Fix graphical glitches occuring in the greyscale library on H1x0 and M5 at 124MHz. The main loop within lcd_grey_data() needed instruction reordering (interspersing lcd writes with memory accesses) to meed the LCD controller timing. Slight slowdown because of the extra register needed.	2008-01-15 00:51:58 +00:00
x5	Fix bootloaders, and the backlight-modded Ondio build.	2007-11-12 19:19:38 +00:00
adc-iaudio.c
adc-target.h
ata-iaudio.c
button-target.h
lcd-remote-iaudio.c	Scroll on main and remote with a single thread. Change the way system messages are defined before running out is an issue (which requires a full update of rockbox on the player).	2007-07-28 08:12:05 +00:00
lcd-remote-target.h
pcf50606-iaudio.c
powermgmt-iaudio.c	First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.	2007-08-17 06:45:18 +00:00
system-iaudio.c	Coldfire targets: enable buffered writes by default. Speeds up all sorts of I/O that writes to ports: LCD update (except the functions using DMA on H300), ATA writes, .... Some timings had to be adjusted for the new configuration.	2007-10-15 21:16:50 +00:00
usb-iaudio.c	FS #7691 - improved USB detection on PP devices. This patch modifies the target-tree function usb_detect() on all targets from bool to int, returning USB_INSERTED or USB_EXTRACTED instead of true or false. This was done to enable the PP usb_detect() to check for USB_POWER (either a connection to a USB wall charger, or the user holding "charge mode" button) and return that as a third value.	2007-09-04 08:03:07 +00:00