Jens Arnold 837012be86 Fix graphical glitches occuring in the greyscale library on H1x0 and M5 at 124MHz. The main loop within lcd_grey_data() needed instruction reordering (interspersing lcd writes with memory accesses) to meed the LCD controller timing. Slight slowdown because of the extra register needed. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16091 a1c6a512-1295-4272-9138-f99709370657		2008-01-15 00:51:58 +00:00
..
iaudio	Fix graphical glitches occuring in the greyscale library on H1x0 and M5 at 124MHz. The main loop within lcd_grey_data() needed instruction reordering (interspersing lcd writes with memory accesses) to meed the LCD controller timing. Slight slowdown because of the extra register needed.	2008-01-15 00:51:58 +00:00
iriver	Fix graphical glitches occuring in the greyscale library on H1x0 and M5 at 124MHz. The main loop within lcd_grey_data() needed instruction reordering (interspersing lcd writes with memory accesses) to meed the LCD controller timing. Slight slowdown because of the extra register needed.	2008-01-15 00:51:58 +00:00
ata-as-coldfire.S
ata-target.h
crt0.S	Coldfire: Partially revert buffered writes, and enable them explicitly for the LCD only. Turned out that with buffered writes enabled, reads after writes are not always serialized, which is a bad thing for I/O. Buffered writes to the LCD are safe because that's write-only. Fixes FS #7985. How come I didn't notice this earlier? :>	2007-10-17 20:45:13 +00:00
i2c-coldfire.c
memcpy-coldfire.S
memmove-coldfire.S
memset-coldfire.S
memset16-coldfire.S
pcf50606-coldfire.c	Coldfire: Partially revert buffered writes, and enable them explicitly for the LCD only. Turned out that with buffered writes enabled, reads after writes are not always serialized, which is a bad thing for I/O. Buffered writes to the LCD are safe because that's write-only. Fixes FS #7985. How come I didn't notice this earlier? :>	2007-10-17 20:45:13 +00:00
pcm-coldfire.c	Unify PCM interface just above the hardware driver level for all targets including the sims. Perform lockout of audio callback when changing states. Weird new playback or recording trouble? Check before and after this revision first though things seem quite sound.	2007-10-06 22:27:27 +00:00
strlen-coldfire.S
system-coldfire.c	Thanks to LinusN, fix Coldfire bootloaders not booting - FS#7533	2007-10-02 07:54:50 +00:00
system-target.h	Coldfire: Partially revert buffered writes, and enable them explicitly for the LCD only. Turned out that with buffered writes enabled, reads after writes are not always serialized, which is a bad thing for I/O. Buffered writes to the LCD are safe because that's write-only. Fixes FS #7985. How come I didn't notice this earlier? :>	2007-10-17 20:45:13 +00:00
usb-target.h