Michael Sevakis 4ed78f5c72 Clean up panicf and introduce system_exception_wait to do further target tasks and wait for a button when an unrecoverable error has occurred (panic, UIE, etc.). Returning from that function should reboot or don't return from it. Move UIE and __div0 for ARM to its own file. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19716 a1c6a512-1295-4272-9138-f99709370657		2009-01-08 10:15:32 +00:00
..
adc-imx31.c	Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.	2008-12-21 18:10:36 +00:00
adc-target.h	Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.	2008-12-21 18:10:36 +00:00
ata-imx31.c
ata-target.h
audio-gigabeat-s.c	Gigabeat S: Allow recording from FM. Give FM the same volume range as playback. NOTE: This bumps the si4700 output volume to -0dB so other players with that may need a minor adjustment.	2008-12-31 01:38:44 +00:00
avic-imx31.c	Gigabeats S: Simply ignore that occasional spurious unknown IRQ (-1) that goes through irq_handler even if the AVIC is used. If no pending interrupt is indicated (anything else should be vectored), simply returning from the handler appears to have no ill effect. The cause for entering irq_handler is unknown for now (or I missed something important :\).	2008-11-27 11:49:49 +00:00
avic-imx31.h
backlight-imx31.c	Gigabeat S: Turn off backlight LED supply after a 2-second delay and save a little power. Hardware fading required keeping supply enabled during fade out. Let fade happen at poweroff (might as well~~~).	2008-12-04 04:16:53 +00:00
backlight-target.h	Gigabeat S: Turn off backlight LED supply after a 2-second delay and save a little power. Hardware fading required keeping supply enabled during fade out. Let fade happen at poweroff (might as well~~~).	2008-12-04 04:16:53 +00:00
button-imx31.c
button-target.h
clkctl-imx31.c
clkctl-imx31.h
dma_start.c
fmradio-i2c-gigabeat-s.c	Make si4700 tuner driver more sane with bit and field defines and entirely hide strange i2c interface from code with write/set/clear/masked functionality. On Gigabeat S use by-the-book busmode selection and GPIO lines. Implement some primitive station detection, debug registers in screen, and misc. changes to tie things together.	2008-12-27 19:18:50 +00:00
gpio-gigabeat-s.c
gpio-imx31.c
gpio-imx31.h
gpio-target.h
i2c-imx31.c	imx31: Fix a couple small problems with the i2c driver that went unnoticed until FM. Reset addr_count always and stop resetting module before STOP is actually generated. Simplify a tiny bit and remove inactive preprocessor block.	2008-12-26 16:06:40 +00:00
i2c-imx31.h
i2s-imx31.c	Fix missing #includes and make local functions static for gigabeat	2008-07-18 23:28:54 +00:00
kernel-imx31.c	Strange little kernel optimization to ease targeting the timer tick and to limit the number of loops in the tick function to the number of tasks added rather than always looping the max number.	2008-10-27 16:30:24 +00:00
lcd-imx31.c	Gigabeat S: Turn off backlight LED supply after a 2-second delay and save a little power. Hardware fading required keeping supply enabled during fade out. Let fade happen at poweroff (might as well~~~).	2008-12-04 04:16:53 +00:00
lcd-target.h
mc13783-gigabeat-s.c	Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.	2008-12-21 18:10:36 +00:00
mc13783-imx31.c	Fix red and a couple other things I somehow missed.	2008-12-10 09:11:43 +00:00
mc13783-target.h	Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.	2008-12-21 18:10:36 +00:00
mmu-imx31.c
mmu-imx31.h
pcm-imx31.c	Hehe. Broke it already in last-second sanitation. Put some bits back.	2008-12-31 01:54:26 +00:00
power-imx31.c	Make si4700 tuner driver more sane with bit and field defines and entirely hide strange i2c interface from code with write/set/clear/masked functionality. On Gigabeat S use by-the-book busmode selection and GPIO lines. Implement some primitive station detection, debug registers in screen, and misc. changes to tie things together.	2008-12-27 19:18:50 +00:00
power-imx31.h	Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.	2008-12-21 18:10:36 +00:00
powermgmt-imx31.c	Gigabeat S: Simplify and use a thermistor lookup table (ADC value => deg C) . Saves some binsize.	2008-12-24 23:36:33 +00:00
powermgmt-target.h	Gigabeat S: Fix a divide by zero in runtime estimation caused by using actual charger current. Use default constant for now.	2008-12-24 23:54:57 +00:00
serial-imx31.h	Hopefully fix read.	2008-12-25 03:23:22 +00:00
spi-imx31.c
spi-imx31.h
system-imx31.c	Clean up panicf and introduce system_exception_wait to do further target tasks and wait for a button when an unrecoverable error has occurred (panic, UIE, etc.). Returning from that function should reboot or don't return from it. Move UIE and __div0 for ARM to its own file.	2009-01-08 10:15:32 +00:00
system-target.h	Fix red. Remove stale comment.	2008-12-21 18:27:59 +00:00
timer-imx31.c	Update copyright headers for 2009 since they're new files.	2009-01-05 00:06:45 +00:00
timer-target.h	Update copyright headers for 2009 since they're new files.	2009-01-05 00:06:45 +00:00
usb-imx31.c	Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.	2008-12-21 18:10:36 +00:00
usb-target.h	Fix missing #includes and make local functions static for gigabeat	2008-07-18 23:28:54 +00:00
wmcodec-imx31.c	Use set/clr instead of mod functions where applicable.	2008-12-19 15:30:30 +00:00