..
sansa-c200v2
FS#10245 by Jack Halpin : Adjust Clocking scheme on Sansa AMS
2009-05-26 18:44:02 +00:00
sansa-clip
FS#10245 by Jack Halpin : Adjust Clocking scheme on Sansa AMS
2009-05-26 18:44:02 +00:00
sansa-e200v2
FS#10245 by Jack Halpin : Adjust Clocking scheme on Sansa AMS
2009-05-26 18:44:02 +00:00
sansa-fuze
Revisite Sansa fuze button driver:
2009-06-02 01:31:16 +00:00
sansa-m200v4
Remove unnecessary #include "adc.h"
2009-04-25 22:24:59 +00:00
adc-target.h
app.lds
Sansa AMS: Centralise mapping of RAM and IRAM in as3525.h via #defines. This will hopefully make ongoing mmu work easier as less places need to be changed.
2009-05-20 21:09:53 +00:00
ascodec-as3525.c
Use I2C2_DACNT register (number of pending i2c bytes to read/write) to determine if an ascodec i2c transfer is done. This should fix i2c problems with MMU enabled.
2009-05-31 17:48:19 +00:00
ascodec-target.h
ata_sd_as3525.c
Sansa AMS : higher a bit the delay between acmd41 loops, needed for some microsd cards. FS#10268 by Eric Shattow
2009-06-01 10:51:05 +00:00
audio-as3525.c
FS#9611 - Sansa Clip radio code. Commit final part which enables the LINE2 input that carries the analog radio signal on ams sansas.
2009-02-05 19:57:18 +00:00
backlight-e200v2-fuze.c
Remove the calls to backlight_lcd_sleep_countdown from target specific code and move it into backlight.c
2009-04-26 01:23:39 +00:00
boot.lds
Sansa AMS: Centralise mapping of RAM and IRAM in as3525.h via #defines. This will hopefully make ongoing mmu work easier as less places need to be changed.
2009-05-20 21:09:53 +00:00
clock-target.h
AMSSansa: Add AS3525_DRAM_FREQ as a configurable frequency. Attempts to use PCLK != DRAM still fail but a method is now in place. Default scheme remains 248/62/62.
2009-05-29 20:19:35 +00:00
debug-as3525.c
AMSSansa: clock-target.h and debug-as3525 now use AS3525_FCLK_PREDIV correctly. Default frequency scheme remains 248/62/62.
2009-05-29 06:43:37 +00:00
debug-target.h
Some Sansa Fuze work: Get Home button working (no keymap changes yet, so it's not very noticeable) and "fix" debug menu from not showing the dbop data (see FIXME), some cleanup in the fuze's button driver
2009-02-17 02:36:48 +00:00
dma-pl081.c
Patch by Rafaël Carré - Sansa AMS: Fix a few mistakes in DMA code
2009-04-07 17:08:26 +00:00
dma-target.h
Sansa AMS : use SD controller status to notify end of data transfer
2009-01-08 08:27:42 +00:00
fmradio-i2c-as3525.c
Enable FM radio on the sansa c200v2 (untested).
2009-04-26 21:28:34 +00:00
i2s-as3525.c
kernel-as3525.c
Few Fuze/e200v2 button fixes. Don't read the scrollwheel when the hold button is active and rename a variable to describe better what it is for.
2009-04-13 17:10:52 +00:00
lcd-as-e200v2-fuze.S
FS#10118 & FS#10165 : lcd_blit_yuv() for Sansa Fuze & Sansa e200v2
2009-05-12 13:22:39 +00:00
pcm-as3525.c
Patch by Rafaël Carré - Sansa AMS : inform pcm.c when playback stopped, use pcm_play_dma_stopped_callback()
2009-04-07 17:11:55 +00:00
power-as3525.c
Make si4700 tuner driver more sane with bit and field defines and entirely hide strange i2c interface from code with write/set/clear/masked functionality. On Gigabeat S use by-the-book busmode selection and GPIO lines. Implement some primitive station detection, debug registers in screen, and misc. changes to tie things together.
2008-12-27 19:18:50 +00:00
powermgmt-as3525.c
powermgmt-target.h
FS#9968: Charging on e200v2
2009-03-22 19:06:54 +00:00
system-as3525.c
FS#10245 by Jack Halpin : Adjust Clocking scheme on Sansa AMS
2009-05-26 18:44:02 +00:00
system-target.h
timer-target.h
usb-as3525.c
Fix #includes in usb-as3525.c
2009-04-12 19:08:26 +00:00
4aec45e68f