Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm
History
Amaury Pouly 48b3de028e as3525v2-usb: rework ep listing&xfers cancelling, implement speed reporting, first try at implementing disconnection 
There is still a problem after the set address request which makes the driver working randomly.
I still didn't manage do get a proper disconnect interrupt.
From time to time, when unplugging cable, neither rockbox nor usb driver reports disconnect even.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27161 a1c6a512-1295-4272-9138-f99709370657
2010-06-27 22:06:30 +00:00
..
archos/av300
as3525 as3525v2-usb: rework ep listing&xfers cancelling, implement speed reporting, first try at implementing disconnection 2010-06-27 22:06:30 +00:00
at91sam
imx31 Gigabeat S: Use statically initialized channel descriptors. Also, there's no need for them to be in non-cached memory since they're only used on the AP side. 2010-06-24 08:40:05 +00:00
ipod iPod 3G: Ensure wheel repeats are not generated unless the same keycode is posted more than once in a row, regardless of velocity. Remove 'was_hold' from handle_scroll_wheel calls since the call is never reachable with was_hold being true. Just clear pending ints in one spot after setting levels. Init prev_scroll properly again in 3g case. 2010-06-21 18:47:42 +00:00
iriver FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
olympus FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
pbell FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
philips FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
pnx0101 Make PCM->driver interface about as simple as it will get. Registered callback, zero data, alignment and stops are handled entirely inside pcm.c; driver merely calls fixed pcm.c callback. Remove pcm_record_more and do it just like playback; the original reason behind it isn't very practical in general. Everything checks out on supported targets. There wer some compat changes I can't check out on many unsupoorted but if there's a problem it will be a minor oops. Plugins become incompatible due to recording tweak-- full update. Sorted API. 2010-05-24 16:42:32 +00:00
s3c2440 Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix. 2010-06-06 13:20:47 +00:00
s5l8700 lcd-m6sp.c: remove \r 2010-06-25 13:32:57 +00:00
samsung FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
sandisk e200v1/c200v1: Implement limited samplerate switching. Rates 24kHz and below are being a bear as far as minor crackling at higher amplitude-- leave them out for the time being since no solution is currently evident. 48, 44, 32 (rec rates 24, 22, 16) seem perfectly fine. I'm betting c200 is ok to include because it uses the same setup as e200. 2010-06-26 10:07:17 +00:00
tatung
tcc77x Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes). 2010-05-06 21:04:40 +00:00
tcc780x change the D2 bootloader to boot rockbox by default. boot OF is hold is on or usb is connected 2010-06-21 10:51:39 +00:00
tms320dm320 Make sure files which aren't windows-specific use \n line endings only 2010-06-17 16:59:51 +00:00
adc-as3514.c adc-as3514.c: cosmetics 2010-05-15 19:44:54 +00:00
adc-pp5020.c
ascodec-pp.c
ascodec-target.h as3514/as3543 fixes 2010-05-17 20:53:25 +00:00
ata-as-arm.S FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
ata-nand-telechips.c
ata-pp5002.c
ata-pp5020.c
ata-sd-pp.c Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix. 2010-06-06 13:20:47 +00:00
ata-target.h
audio-pp.c
crt0-pp-bl.S
crt0-pp.S ARM: use BX when branch to an address in register 2010-05-31 15:14:26 +00:00
crt0.S arm/crt0.S: comment why the reset vector doesn't use absolute addressing 2010-06-18 18:31:14 +00:00
ffs-arm.S
i2c-pp.c
i2c-telechips.c Re-write the Telechips I2C delay routine in assembler to stop the compiler optimising it away. Tested with EABI and non-EABI compilers. 2010-06-16 21:03:57 +00:00
i2s-pp.c e200v1/c200v1: Implement limited samplerate switching. Rates 24kHz and below are being a bear as far as minor crackling at higher amplitude-- leave them out for the time being since no solution is currently evident. 48, 44, 32 (rec rates 24, 22, 16) seem perfectly fine. I'm betting c200 is ok to include because it uses the same setup as e200. 2010-06-26 10:07:17 +00:00
kernel-pp.c
lcd-as-memframe.S FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
lcd-c200_c200v2.c udelay between command and data write seems to get rid of the display glitches on C200v2 2010-06-27 03:24:56 +00:00
lcd-ssd1815.c
memcpy-arm.S FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
memmove-arm.S FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
memset-arm.S FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
memset16-arm.S FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
mmu-arm.h
mmu-arm.S Update Samsung YP-S3 bootloader demo 2010-05-30 21:43:14 +00:00
mmu-armv6.S
pcm-pp.c pcm-pp: revert r26756 2010-06-11 11:25:16 +00:00
pcm-telechips.c Make PCM->driver interface about as simple as it will get. Registered callback, zero data, alignment and stops are handled entirely inside pcm.c; driver merely calls fixed pcm.c callback. Remove pcm_record_more and do it just like playback; the original reason behind it isn't very practical in general. Everything checks out on supported targets. There wer some compat changes I can't check out on many unsupoorted but if there's a problem it will be a minor oops. Plugins become incompatible due to recording tweak-- full update. Sorted API. 2010-05-24 16:42:32 +00:00
powermgmt-ascodec.c as3525v2: fix end of charge detection 2010-05-19 14:06:08 +00:00
sd-pp-target.h
support-arm.S ARM: __div0() takes no argument 2010-06-12 17:15:39 +00:00
system-arm.c __div0: give the address of the instruction calling division to UIE 2010-06-12 17:15:44 +00:00
system-arm.h
system-pp502x.c
system-pp5002.c Squeeze down the PP5002 cache routines a bit. 2010-06-18 06:54:58 +00:00
system-target.h
thread-arm.c FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
thread-pp.c For multiprocessor targets, do the thread_exit routine such that we don't need to rely on the compiler's good graces to have stack switching be reliable. Only needs a few asm instructions. 2010-06-18 03:10:18 +00:00
timer-pp.c
usb-drv-arc.c
usb-fw-pp502x.c
usb-fw-pp5002.c
usb-s3c6400x.c Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes). 2010-05-06 21:04:40 +00:00
usb-target.h
usb-tcc.c Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes). 2010-05-06 21:04:40 +00:00
wmcodec-pp.c FS#11417 by Joe Balough: fix audio/tuner on philips hdd6330 2010-06-19 03:51:57 +00:00
wmcodec-telechips.c