| .. |
|
adc.h
|
Moved SH1 ADC to target tree.
|
2007-04-15 23:35:56 +00:00 |
|
arcotg_udc.h
|
Usb Stack: only setup packet handling, and not enabled by default as there is a lot to do.
|
2007-08-27 16:04:32 +00:00 |
|
as3514.h
|
Sansa c200 port. Rockbox works with sound. Several features are disabled including some lcd options, FM radio, recording, and all plugins. Loading the OF from the Rockbox bootloader does not work.
|
2007-09-06 03:28:58 +00:00 |
|
ata.h
|
Do the CONFIG_LED define
|
2007-02-18 05:07:19 +00:00 |
|
ata_idle_notify.h
|
dont allow the ata callbacks to be run less than once every 30s unless
|
2006-11-26 09:53:42 +00:00 |
|
ata_mmc.h
|
Accept FS#7134 - Sansa: external sd card support by Antonius Hellmann with some tweaks. All testers have given the green light. (Now for the RED ?? ;).
|
2007-06-30 02:08:27 +00:00 |
|
audio.h
|
Even more optimizing for the recording name change...
|
2007-08-02 18:45:38 +00:00 |
|
audiohw.h
|
Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks.
|
2007-09-21 15:51:53 +00:00 |
|
backlight.h
|
Removed special X5 backlight handling, and replaced it with a generic system that makes the backlight light up on shutdown and not time out unless it's completely disabled in the current player state.
|
2007-08-12 11:18:52 +00:00 |
|
bidi.h
|
|
|
|
bitswap.h
|
|
|
|
buffer.h
|
|
|
|
button.h
|
Wheel acceleration for e200. A general acceleration interface intended for use on any scroll target and by any code. A general interface to obtain data associated with most recently dequeued button presses and actions. Use #define HAVE_SCROLLWHEEL and set appropriate constants, values in the scroller driver that feel right.
|
2007-07-22 21:02:24 +00:00 |
|
config-c200.h
|
Enabled button light for Sansa C200
|
2007-09-25 20:24:38 +00:00 |
|
config-e200.h
|
Firmware "hacker" code for the e200r install so the full bootloader rom doesnt need to be written.
|
2007-09-09 11:20:20 +00:00 |
|
config-fmrecorder.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
config-gigabeat-s.h
|
Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks.
|
2007-09-21 15:51:53 +00:00 |
|
config-gigabeat.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
config-h10.h
|
Increase Max settable battery capacity for the H10, closes FS#7795
|
2007-09-18 21:10:47 +00:00 |
|
config-h10_5gb.h
|
Add the define for the usb stack (in comment) on targets that can be used for it.
|
2007-08-29 00:20:01 +00:00 |
|
config-h100.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
config-h120.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
config-h300.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
config-iaudiom5.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
config-iaudiox5.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
config-ifp7xx.h
|
Disable tagcache on iriver iFP to save some memory.
|
2007-09-20 22:16:08 +00:00 |
|
config-ipod1g2g.h
|
Fix the LCD line remaining active after shutdown on grayscale ipods (FS#5199). Original patch by Tomasz Mon, modified by me.
|
2007-09-29 20:56:07 +00:00 |
|
config-ipod3g.h
|
Fix the LCD line remaining active after shutdown on grayscale ipods (FS#5199). Original patch by Tomasz Mon, modified by me.
|
2007-09-29 20:56:07 +00:00 |
|
config-ipod4g.h
|
Fix the LCD line remaining active after shutdown on grayscale ipods (FS#5199). Original patch by Tomasz Mon, modified by me.
|
2007-09-29 20:56:07 +00:00 |
|
config-ipodcolor.h
|
Accept patch in FS#6869 by Justin Foell, increases maximum settable battery capacity to 1200 mAh for ipod color and 4g, closes FS#6422
|
2007-09-02 07:31:10 +00:00 |
|
config-ipodmini.h
|
Fix the LCD line remaining active after shutdown on grayscale ipods (FS#5199). Original patch by Tomasz Mon, modified by me.
|
2007-09-29 20:56:07 +00:00 |
|
config-ipodmini2g.h
|
Fix the LCD line remaining active after shutdown on grayscale ipods (FS#5199). Original patch by Tomasz Mon, modified by me.
|
2007-09-29 20:56:07 +00:00 |
|
config-ipodnano.h
|
Add the define for the usb stack (in comment) on targets that can be used for it.
|
2007-08-29 00:20:01 +00:00 |
|
config-ipodvideo.h
|
Add the define for the usb stack (in comment) on targets that can be used for it.
|
2007-08-29 00:20:01 +00:00 |
|
config-mrobe500.h
|
Make sure that SVN keywords are set properly
|
2007-09-22 15:43:38 +00:00 |
|
config-ondiofm.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
config-ondiosp.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
config-player.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
config-recorder.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
config-recorderv2.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
config-tpj1022.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
config.h
|
Anti-red?
|
2007-09-29 06:56:21 +00:00 |
|
config_caps.h
|
Straighten out some audio path APIs and misc. audio stuff. Having recording is not a prerequisite to having input/output source selection which is probably most useful when adding a audio input features like FM to a new port without forcing recording to be implemented first.
|
2007-06-08 23:42:04 +00:00 |
|
cpu.h
|
Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks.
|
2007-09-21 15:51:53 +00:00 |
|
debug.h
|
Fix simulator builds, and some debugf() format strings.
|
2007-03-17 09:54:28 +00:00 |
|
disk.h
|
Partition type 0x84 is "OS/2 hidden C: drive"
|
2007-03-16 14:41:55 +00:00 |
|
dm320.h
|
Working DM320 interrupts, changed the way registers are accessed in spi and uart drivers. Uart might be broken with interrupts - buttons on remote don't seem to respond when interrupts are enabled.
|
2007-09-23 23:08:39 +00:00 |
|
ds2411.h
|
iAudio X5: Enable reading of DS2411 serial number. See it under System|Debug|View HW info.
|
2007-03-11 13:59:31 +00:00 |
|
eeprom_24cxx.h
|
|
|
|
eeprom_settings.h
|
Prepare core support for the iriver bootloader supporting ROM images
|
2007-01-12 18:34:00 +00:00 |
|
enc_base.h
|
Assumption about there being MPEG1-only samplerates available and therefore MPEG1-only bitrates for recording is no longer valid. Fix that.
|
2007-06-06 21:24:20 +00:00 |
|
fat.h
|
Remove unused code, make comments c-style, make one private function static
|
2007-02-25 15:44:55 +00:00 |
|
fmradio.h
|
Change the radio screen and recording screen to use the global_status structure for state. I guess global_status had been added already and I missed it. :D
|
2007-02-07 04:24:21 +00:00 |
|
fmradio_i2c.h
|
|
|
|
font.h
|
Tab police
|
2007-09-14 16:04:01 +00:00 |
|
gdb_api.h
|
|
|
|
general.h
|
Forgot to use cvs add on a few new files in the fresh checkout I used. woops.
|
2006-11-06 18:18:05 +00:00 |
|
generic_i2c.h
|
Removed executable flag
|
2007-01-09 23:29:07 +00:00 |
|
hangul.h
|
|
|
|
hotswap.h
|
Some rewriting of the e200 ata driver. No more panicing. Faster card multiplexing. Some calculated yielding (further tuneable if needed). Hopefully more reliable in general. Easy revert if rebellious.
|
2007-07-25 06:15:07 +00:00 |
|
hwcompat.h
|
Remove the hack which read the ipod hardware revision from flash in the bootloader and passed it to Rockbox via a fixed address in SDRAM. Rockbox now remaps flash and so can just read the value itself. Also clean up the debug menu a little - only display the hw revision for ipods, and add the lcd_type variable to indicate the type of LCD (0 or 1) for ipod Color/Photo.
|
2007-07-25 13:12:38 +00:00 |
|
i2c-coldfire.h
|
|
|
|
i2c-pp.h
|
Correct the (C) info
|
2007-02-27 21:22:29 +00:00 |
|
i2c.h
|
|
|
|
i2s.h
|
Reenable scaling on Sansa since a reasonable solution to clicks has been found.
|
2007-07-26 10:46:17 +00:00 |
|
id3.h
|
Remove the ID3 tag version priority setting on the grounds of it being pretty pointless. ID3v2 tags are superior to ID3v1 tags, and needs less seeking around to find.
|
2007-09-19 10:40:55 +00:00 |
|
imx31l.h
|
Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks.
|
2007-09-21 15:51:53 +00:00 |
|
isp1362.h
|
Removed executable flag
|
2007-01-09 23:29:07 +00:00 |
|
kernel.h
|
Commit a subset of the dual core changes that have to do with cache handling, stacks, firmware startup and thread startup. Tested on e200, H10-20GB, iPod Color and 5.5G. Thread function return implemented for all targets. Some changes to plugins to follow shortly.
|
2007-09-28 10:20:02 +00:00 |
|
lcd-charcell.h
|
Hmpf, these ever-missing svn properties...
|
2007-04-06 11:22:26 +00:00 |
|
lcd-remote.h
|
Enable a lot more features for simulators and add stubs where necessary, simulators should now work with identical lng and voice files as the respective target
|
2007-08-12 19:49:03 +00:00 |
|
lcd.h
|
Fix the LCD line remaining active after shutdown on grayscale ipods (FS#5199). Original patch by Tomasz Mon, modified by me.
|
2007-09-29 20:56:07 +00:00 |
|
led.h
|
|
|
|
linkedlist.h
|
fix red and yellow - i hope and double content in some files.. dont ask how this could happen
|
2007-08-27 16:26:56 +00:00 |
|
logf.h
|
Fix simulator builds, and some debugf() format strings.
|
2007-03-17 09:54:28 +00:00 |
|
lv24020lp.h
|
e200: Tuner driver needs to yield alot and also be mutexed. FM debug screen got broken again and was ignoring cancellation and not drawing the lines.
|
2007-07-14 22:00:50 +00:00 |
|
m5636.h
|
Removed executable flag
|
2007-01-09 23:29:07 +00:00 |
|
mas.h
|
|
|
|
mas35xx.h
|
make audiohw.h include the DAC header files
|
2007-05-22 20:17:35 +00:00 |
|
mcf5249.h
|
H300: (1) Use DMA for LCD updates, with auto-aligned line reads. Speeds up LCD updates by ~ 75% at 11MHz and 45MHz. Only ~ 11% speedup at 124MHz due to (2). (2) Less aggressive LCD transfer timing at 124MHz. With the previous timing, slightly corrupted display contents was reported, and with DMA transfers at least 4 waitstates are needed to make updates work at all. * A table in system-iriver.c shows settings for all integer multiples of the base clock frequency (info for developers, not yet complete).
|
2006-11-02 20:50:50 +00:00 |
|
mcf5250.h
|
|
|
|
mp3_playback.h
|
Accept FS#7264 'Build with -Os switch for coldfire targets'.
|
2007-06-13 15:35:07 +00:00 |
|
mp3data.h
|
Shave a few bytes off the binary size, especially on hwcodec targets
|
2007-02-15 22:55:22 +00:00 |
|
mpeg.h
|
Remove the ID3 tag version priority setting on the grounds of it being pretty pointless. ID3v2 tags are superior to ID3v1 tags, and needs less seeking around to find.
|
2007-09-19 10:40:55 +00:00 |
|
panic.h
|
|
|
|
pcf50605.h
|
Try to fix the case where Ipods would spuriously wake up even though no alarm had been set.
|
2007-09-28 15:09:54 +00:00 |
|
pcf50606.h
|
Some more M5 adjustments.
|
2007-03-05 01:31:26 +00:00 |
|
pcm_playback.h
|
Audio Init: Just can't stand that heirarchy. Add one level of abstraction. Might come in handy anyhow. Use sound.h instead of the conditional includes for audio hardware headers. If someone doesn't like that, yell at my evil twin. :)
|
2007-03-11 06:21:43 +00:00 |
|
pcm_record.h
|
Use bitmasks to define which inputs are available. Makes it easier to remove old assumptions of which are available. Inspired by e200 being unique in having FM Radio and Mic but no Line. Doesn't remove the assumption that Mic is available or that one of Mic and/or Line is available just to avoid excessive #ifdef'ing until needed.
|
2007-05-20 20:26:36 +00:00 |
|
pcm_sampr.h
|
e200: Add recording. Just from MIC right now and FM integration will happen soon. Most every bit of weirdness is nescessary and no problems seem to exist that the retailos doesn't exhibit too (namely noise when LCD is on when recording from MIC).
|
2007-06-05 07:03:30 +00:00 |
|
pnx0101.h
|
PNX0101: new register names and polishing support for Clock Generation Unit
|
2007-09-20 22:13:48 +00:00 |
|
power.h
|
Moved archos power handling into target tree. * Tuner power handling cleaned up a bit.
|
2007-08-14 22:06:23 +00:00 |
|
powermgmt.h
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
|
2007-08-17 06:45:18 +00:00 |
|
pp5002.h
|
Compile Portal Player bootloaders as single core. Cleanup the startup code for bootloaders. Remove cop stack entirely and keep IRAM use down on all relevant targets - just use the 128-byte idle stack. Use the inline asm version of current_core for pp5002 as well.
|
2007-09-29 06:17:33 +00:00 |
|
pp5020.h
|
Commit a subset of the dual core changes that have to do with cache handling, stacks, firmware startup and thread startup. Tested on e200, H10-20GB, iPod Color and 5.5G. Thread function return implemented for all targets. Some changes to plugins to follow shortly.
|
2007-09-28 10:20:02 +00:00 |
|
pp5024.h
|
Accept FS#7134 - Sansa: external sd card support by Antonius Hellmann with some tweaks. All testers have given the green light. (Now for the RED ?? ;).
|
2007-06-30 02:08:27 +00:00 |
|
profile.h
|
|
|
|
replaygain.h
|
Small ReplayGain cleanup. Move RVA2 specific code to id3.c and don't do the parsing via strings. Generalize parts of the code for later use by MPC. Make some local functions static. Add and update some comments for clarity.
|
2007-08-25 10:25:13 +00:00 |
|
rolo.h
|
Improved RoLo support for PortalPlayer - handles the COP correctly
|
2007-02-27 22:55:12 +00:00 |
|
rtc.h
|
Set CONFIG_RTC to 0 for non-RTC targets, and check with #if to profit from -Wundef. No code change.
|
2007-03-16 23:47:03 +00:00 |
|
s1a0903x01.h
|
Fix all the red this time?
|
2007-07-14 13:41:59 +00:00 |
|
s3c2440.h
|
Get rid of yellow plus an optimization I should have seen in the first place.
|
2007-07-05 08:21:10 +00:00 |
|
scroll_engine.h
|
FS#7808 by Tom Ross, Ken Fazzone and me, with help from Antoine Cellerier.
|
2007-09-27 15:42:55 +00:00 |
|
serial.h
|
Logf output on the serial port for h100 targets
|
2006-10-12 20:22:16 +00:00 |
|
sh7034.h
|
|
|
|
sound.h
|
make audiohw.h include the DAC header files
|
2007-05-22 20:17:35 +00:00 |
|
spdif.h
|
Straighten out some audio path APIs and misc. audio stuff. Having recording is not a prerequisite to having input/output source selection which is probably most useful when adding a audio input features like FM to a new port without forcing recording to be implemented first.
|
2007-06-08 23:42:04 +00:00 |
|
spi.h
|
start of the tsc2100 driver.
|
2007-09-22 14:21:07 +00:00 |
|
structec.h
|
Make database endianess independent.
|
2007-02-13 21:51:18 +00:00 |
|
sw_i2c.h
|
FS#6419 - driver for H1x0 series RTC Mod with runtime detection
|
2007-02-28 13:20:36 +00:00 |
|
system.h
|
Messages queues must be guarded on both ends or else it's a race between detecting a message present and missing a wakeup on thread about to wait. Keeping IRQs from interacting with the scheduler would be preferable but this should do at the moment. Add more detailed panic info regarding blocking violations so we know who. Make panicf function well enough on Gigabeat and PortalPlayer targets. Move the core sleep instructions into a CPU-specific inline to keep thing organized.
|
2007-05-12 05:20:04 +00:00 |
|
tea5767.h
|
Do some planned radio interface cleanup since adding in the LV24020LP.
|
2007-07-14 11:20:31 +00:00 |
|
thread.h
|
Commit a subset of the dual core changes that have to do with cache handling, stacks, firmware startup and thread startup. Tested on e200, H10-20GB, iPod Color and 5.5G. Thread function return implemented for all targets. Some changes to plugins to follow shortly.
|
2007-09-28 10:20:02 +00:00 |
|
timer.h
|
Beginning of an M:Robe 500i port. Currently only in the bootloader stage. Needs another piece of code to start the boot process - will be in the wiki.
|
2007-09-20 04:46:41 +00:00 |
|
tlv320.h
|
* changed pararmeter of audiohw_mute from int to bool
|
2007-06-13 06:33:40 +00:00 |
|
tsc2100.h
|
start of the tsc2100 driver.
|
2007-09-22 14:21:07 +00:00 |
|
tuner.h
|
Moved archos power handling into target tree. * Tuner power handling cleaned up a bit.
|
2007-08-14 22:06:23 +00:00 |
|
uda1380.h
|
* changed pararmeter of audiohw_mute from int to bool
|
2007-06-13 06:33:40 +00:00 |
|
usb.h
|
Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks.
|
2007-09-21 15:51:53 +00:00 |
|
usb_ch9.h
|
fix red and yellow - i hope and double content in some files.. dont ask how this could happen
|
2007-08-27 16:26:56 +00:00 |
|
usb_serial.h
|
|
|
|
usbstack.h
|
usb stack code police, fix some warnings and set svn keywords correctly
|
2007-09-19 23:20:55 +00:00 |
|
wm8731l.h
|
* changed pararmeter of audiohw_mute from int to bool
|
2007-06-13 06:33:40 +00:00 |
|
wm8751.h
|
Fix my mistakes in some bits in the WM8751 header. Looks like adaptive boost has been turned on by mistake anyway. Correct that and make sure it is turned on intentionally with the #define. Organize a little bit in there.
|
2007-07-17 00:23:56 +00:00 |
|
wm8758.h
|
* changed pararmeter of audiohw_mute from int to bool
|
2007-06-13 06:33:40 +00:00 |
|
wm8975.h
|
* changed pararmeter of audiohw_mute from int to bool
|
2007-06-13 06:33:40 +00:00 |
|
wmcodec.h
|
fix red
|
2007-06-13 06:41:27 +00:00 |
f548336e27