| .. |
|
adc.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
as3514.h
|
Add register bit defines for as3514 and clean stuff up. Reduce poppiness at startup and shutdown (and even powerup for e200). Really, I can't honestly say it will help anything but an e200v1 but I'm sick of the noises. ;)
|
2008-11-25 16:16:06 +00:00 |
|
as3525.h
|
AS3525: implement tick_start() with TIMER2
|
2008-11-06 14:34:37 +00:00 |
|
ascodec.h
|
Oops, fix red - only include ascodec-target.h when HAVE_AS3514 is defined
|
2008-10-31 00:37:58 +00:00 |
|
ata.h
|
*_hard_reset() is only used inside ata.c, so there's no need to export it to the world
|
2008-11-04 19:37:28 +00:00 |
|
ata_idle_notify.h
|
Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*.
|
2008-11-01 16:14:28 +00:00 |
|
ata_mmc.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
audio.h
|
Moved pcm_record from firmware to apps. Cleaned up some. Now all code using struct mp3entry is in apps.
|
2008-10-14 11:12:20 +00:00 |
|
audiohw.h
|
Use shorter fields in sound_settings_info struct to save some bytes
|
2008-08-11 13:01:01 +00:00 |
|
backlight.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
bidi.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
bitswap.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
buffer.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
button.h
|
Commit FS#9308: differentiate between TOUCHPAD & TOUCHSCREEN
|
2008-08-23 09:46:38 +00:00 |
|
config-c100.h
|
fix reds
|
2008-11-01 16:49:38 +00:00 |
|
config-c200.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-clip.h
|
Sansa Clip: backlight brightness is not possible, so remove references to it
|
2008-11-18 17:40:32 +00:00 |
|
config-cowond2.h
|
Remove iAudio references from the Cowon D2 build, since it is not an iAudio branded player. The binary name has changed to rockbox.d2, so you will need to re-configure and update your bootloader after this change.
|
2008-11-17 21:16:07 +00:00 |
|
config-creativezv.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-creativezvm.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-creativezvm60gb.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-e200.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-e200v2.h
|
AMS Sansa (formerly 'V2') use the as3514 RTC
|
2008-11-10 18:18:27 +00:00 |
|
config-fmrecorder.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-fuze.h
|
AMS Sansa (formerly 'V2') use the as3514 RTC
|
2008-11-10 18:18:27 +00:00 |
|
config-gigabeat-s.h
|
Audio samplerate control for Gigabeat S: 8, 11.025, 12, 16, 22.050, 24, 32, 44.1 and 48 kHz.
|
2008-11-22 12:17:26 +00:00 |
|
config-gigabeat.h
|
Revert last commit (accidentally committed the whole tree)
|
2008-11-12 04:15:34 +00:00 |
|
config-h10.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-h10_5gb.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-h100.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-h120.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-h300.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-hdd1630.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-iaudio7.h
|
fix reds
|
2008-11-01 16:49:38 +00:00 |
|
config-iaudiom3.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-iaudiom5.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-iaudiox5.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-ifp7xx.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-ipod1g2g.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-ipod3g.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-ipod4g.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-ipodcolor.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-ipodmini.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-ipodmini2g.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-ipodnano.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-ipodvideo.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-logikdax.h
|
fix reds
|
2008-11-01 16:49:38 +00:00 |
|
config-m200.h
|
fix reds
|
2008-11-01 16:49:38 +00:00 |
|
config-m200v4.h
|
m200v4: make buttons work again (added a small delay). make m200 keymap better. Add button mappings for the sim. Remove some config defines temporary to make building work again.
|
2008-11-14 21:57:43 +00:00 |
|
config-meizu-m3.h
|
Add new storage-related defines for meizu
|
2008-11-01 17:25:49 +00:00 |
|
config-meizu-m6sl.h
|
Add new storage-related defines for meizu
|
2008-11-01 17:25:49 +00:00 |
|
config-meizu-m6sp.h
|
Add new storage-related defines for meizu
|
2008-11-01 17:25:49 +00:00 |
|
config-mrobe100.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-mrobe500.h
|
New makefile solution: A single invocation of 'make' to build the entire tree. Fully controlled dependencies give faster and more correct recompiles.
|
2008-11-20 11:27:31 +00:00 |
|
config-ondavx747.h
|
Commit some USB and ATA rework/refactoring (+ USB GPIO detection).
|
2008-11-21 12:50:06 +00:00 |
|
config-ondavx767.h
|
Onda VX747:
|
2008-11-04 20:30:01 +00:00 |
|
config-ondiofm.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-ondiosp.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-player.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-recorder.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-recorderv2.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-sa9200.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-tpj1022.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config.h
|
AMS Sansa (formerly 'V2') use the as3514 RTC
|
2008-11-10 18:18:27 +00:00 |
|
config_caps.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
cpu.h
|
Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h
|
2008-10-12 16:46:01 +00:00 |
|
debug.h
|
New makefile solution: A single invocation of 'make' to build the entire tree. Fully controlled dependencies give faster and more correct recompiles.
|
2008-11-20 11:27:31 +00:00 |
|
disk.h
|
Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*.
|
2008-11-01 16:14:28 +00:00 |
|
dm320.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
ds2411.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
eeprom_24cxx.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
eeprom_settings.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
enc_base.h
|
New recording setting to configure how mono recordings are made. Previously, this was always L+R, which was kinda silly if your signal was on L only. This setting allows for L, R or L+R. SWCODEC only for now, to be added for HWCODEC (although that will only be L and L+R probably)
|
2008-10-08 22:18:16 +00:00 |
|
events.h
|
Accept FS#9480 - centralise and organise the events in the apps/ layer.
|
2008-10-16 10:38:03 +00:00 |
|
fat.h
|
Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*.
|
2008-11-01 16:14:28 +00:00 |
|
fmradio.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
fmradio_i2c.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
font.h
|
Added support for configurable rockbox directory. FS#9567 by Alex Bennee.
|
2008-11-24 22:16:07 +00:00 |
|
gdb_api.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
general.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
generic_i2c.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
hangul.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
hd66789r.h
|
Commit fs#9404 (iAudio 7 updates by vitja). Also fixes play/pause behaviour on D2.
|
2008-09-16 08:09:44 +00:00 |
|
hotswap.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
hwcompat.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2c-coldfire.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2c-pp.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2c.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2s.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
ifp_usb_serial.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
imx31l.h
|
Add some watchdog timer definitions for IMX31L
|
2008-11-19 06:32:06 +00:00 |
|
isp1362.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
isp1583.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
jz4740.h
|
Commit some USB and ATA rework/refactoring (+ USB GPIO detection).
|
2008-11-21 12:50:06 +00:00 |
|
kernel.h
|
Fix red-- it should.
|
2008-10-27 17:18:01 +00:00 |
|
lcd-charcell.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
lcd-remote.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
lcd.h
|
Make lcd_set_enable_hook() conditional on HAVE_LCD_ENABLE and HAVE_LCD_COLOR
|
2008-10-31 21:48:44 +00:00 |
|
led.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
logf.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
ltv350qv.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
lv24020lp.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
m5636.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mas.h
|
Moved pcm_record from firmware to apps. Cleaned up some. Now all code using struct mp3entry is in apps.
|
2008-10-14 11:12:20 +00:00 |
|
mas35xx.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mc13783.h
|
MC13783 PMIC: Make some defines more strictly correct-- interrupts, etc.
|
2008-11-19 06:22:09 +00:00 |
|
mcf5249.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mcf5250.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mips-archdefs.h
|
And set svn:eol-style ...
|
2008-07-14 15:19:29 +00:00 |
|
mips.h
|
And set svn:eol-style ...
|
2008-07-14 15:19:29 +00:00 |
|
mipsregs.h
|
Onda VX747:
|
2008-11-04 20:30:01 +00:00 |
|
mmc.h
|
Since *set_led_enabled() is actually an ata-specific feature, move it back to ata_* only
|
2008-11-04 19:57:36 +00:00 |
|
mp3_playback.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mv.h
|
Now also commit added files
|
2008-11-01 16:25:04 +00:00 |
|
nand.h
|
Since *set_led_enabled() is actually an ata-specific feature, move it back to ata_* only
|
2008-11-04 19:57:36 +00:00 |
|
nand_id.h
|
Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*.
|
2008-11-01 16:14:28 +00:00 |
|
panic.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pcf5060x.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pcf50605.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pcf50606.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pcm.h
|
Red build fix: Moved PCM #defines from pcm_record.h to pcm.h. Added necessary #includes to statusbar.c and s1a0903x01.c.
|
2008-10-14 11:43:32 +00:00 |
|
pcm_sampr.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pl081.h
|
Sansa AMS: Use DMA for SD transfers (read and write)
|
2008-11-25 13:38:32 +00:00 |
|
pl180.h
|
Fix the Sansa AMS SD driver
|
2008-11-16 22:26:50 +00:00 |
|
pnx0101.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
power.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
powermgmt.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
pp5002.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pp5020.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pp5024.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
profile.h
|
Commit FS#9170 by Dave Hooper. Adds support for profiling on ARM, and fixes various issues with compiling profile builds. Also, note that profile_reader.pl syntax has changed.
|
2008-07-28 22:43:41 +00:00 |
|
qt1106.h
|
set svn properties
|
2008-09-17 18:50:34 +00:00 |
|
r61509.h
|
Fix the LCD bug!
|
2008-07-16 15:25:35 +00:00 |
|
ramdisk.h
|
Since *set_led_enabled() is actually an ata-specific feature, move it back to ata_* only
|
2008-11-04 19:57:36 +00:00 |
|
rolo.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
rtc.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
s1a0903x01.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
s3c2440.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
s5l8700.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
scroll_engine.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
sd.h
|
sd.h : avoid namespace collision by prefixing defines with SD_
|
2008-11-09 23:40:21 +00:00 |
|
serial.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
sh7034.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
si4700.h
|
Add more driver stubs to make the Fuze and e200v2 main builds compile; Correct the memory definition for the Fuze (8MB)
|
2008-11-11 14:46:13 +00:00 |
|
sound.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
spdif.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
spi.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
storage.h
|
Since *set_led_enabled() is actually an ata-specific feature, move it back to ata_* only
|
2008-11-04 19:57:36 +00:00 |
|
structec.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
sw_i2c.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
system.h
|
Macros should be ALL CAPS, so rename (un)likely() to (UN)LIKELY()
|
2008-11-22 16:56:20 +00:00 |
|
tcc77x.h
|
Initial commit of iaudio 7 port by Vitja Makarov (FS#9245). Port is at quite an advanced stage, but is troubled by the lack of a reliable NAND driver (similar to the Cowon D2 port) and is not yet suitable for non-developers.
|
2008-09-06 17:50:59 +00:00 |
|
tcc780x.h
|
Add some missed bits + change MODE to TMODE
|
2008-09-22 19:27:21 +00:00 |
|
tea5767.h
|
code police : fix some multiply defined variables
|
2008-10-18 23:31:29 +00:00 |
|
thread.h
|
Onda VX747:
|
2008-09-14 16:26:08 +00:00 |
|
timer.h
|
Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h
|
2008-10-12 16:46:01 +00:00 |
|
tlv320.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
tsc2100.h
|
Minor missing #include and static function fixes for mrobe
|
2008-09-10 20:14:22 +00:00 |
|
tuner.h
|
Add more driver stubs to make the Fuze and e200v2 main builds compile; Correct the memory definition for the Fuze (8MB)
|
2008-11-11 14:46:13 +00:00 |
|
uda1380.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
usb-tcc7xx.h
|
Prepare for usb-telechips testing
|
2008-09-22 18:49:37 +00:00 |
|
usb.h
|
Add more driver stubs to make the Fuze and e200v2 main builds compile; Correct the memory definition for the Fuze (8MB)
|
2008-11-11 14:46:13 +00:00 |
|
usb_ch9.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
usb_core.h
|
reorganise the USB stack a bit to allow for easier integration of non-ARC controller drivers
|
2008-10-03 22:43:16 +00:00 |
|
usb_drv.h
|
reorganise the USB stack a bit to allow for easier integration of non-ARC controller drivers
|
2008-10-03 22:43:16 +00:00 |
|
wm8721.h
|
Remove the audiohw_set_nsorder() function since it is not used, only implemented on WM8731 and not wanted/used there.
|
2008-10-18 22:37:41 +00:00 |
|
wm8731.h
|
Simplify the wm8731 driver by adding a masked write function. Change _write_or/and to _set/clear. Reduce init sequence by initializing shadows to hardware defaults.
|
2008-11-24 15:26:39 +00:00 |
|
wm8751.h
|
cleanup some audio driver headers
|
2008-07-02 23:01:21 +00:00 |
|
wm8758.h
|
Remove the audiohw_set_nsorder() function since it is not used, only implemented on WM8731 and not wanted/used there.
|
2008-10-18 22:37:41 +00:00 |
|
wm8975.h
|
Remove the audiohw_set_nsorder() function since it is not used, only implemented on WM8731 and not wanted/used there.
|
2008-10-18 22:37:41 +00:00 |
|
wm8978.h
|
Audio samplerate control for Gigabeat S: 8, 11.025, 12, 16, 22.050, 24, 32, 44.1 and 48 kHz.
|
2008-11-22 12:17:26 +00:00 |
|
wm8985.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
wmcodec.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
3511d94031