..
sansa-fuzeplus
Convert remaining memframe LCDs that can be convert to common code.
2011-12-16 23:40:39 +00:00
adc-imx233.c
imx233: remove virtual 5V channel (value doesn't make sense), fix battery conversion (need to trigger delay)
2011-11-14 21:42:43 +00:00
adc-imx233.h
imx233: remove virtual 5V channel (value doesn't make sense), fix battery conversion (need to trigger delay)
2011-11-14 21:42:43 +00:00
app.lds
Do some things to make -ffunction-sections work better.
2011-12-17 01:43:32 +00:00
audioin-imx233.c
imx233/fuze+: implement audioout functions (init, volume, frequency); add stubs for audioin
2011-10-18 22:06:05 +00:00
audioin-imx233.h
imx233/fuze+: implement audioout functions (init, volume, frequency); add stubs for audioin
2011-10-18 22:06:05 +00:00
audioout-imx233.c
imx233/fuze+: implement audioout functions (init, volume, frequency); add stubs for audioin
2011-10-18 22:06:05 +00:00
audioout-imx233.h
imx233/fuze+: implement audioout functions (init, volume, frequency); add stubs for audioin
2011-10-18 22:06:05 +00:00
boot.lds
Do some things to make -ffunction-sections work better.
2011-12-17 01:43:32 +00:00
clkctrl-imx233.c
imx233: fix to typo and remove a forgotten panic
2011-12-15 17:07:15 +00:00
clkctrl-imx233.h
imx233: add control for more clocks, add debug clock debug screen
2011-12-03 15:34:40 +00:00
clock-target.h
crt0.S
Switch to SYS mode on arm FS#12322 by me
2011-10-11 16:06:03 +00:00
debug-imx233.c
imx233: add control for more clocks, add debug clock debug screen
2011-12-03 15:34:40 +00:00
debug-target.h
dma-imx233.c
imx233/fuze+: allow dma info retrieval; wait for end of channel reset before returning; fix typo
2011-10-18 22:03:25 +00:00
dma-imx233.h
imx233/fuze+: allow dma info retrieval; wait for end of channel reset before returning; fix typo
2011-10-18 22:03:25 +00:00
i2c-imx233.c
imx233/fuze+: correctly reset i2c block
2011-09-13 23:40:16 +00:00
i2c-imx233.h
kernel-imx233.c
lcdif-imx233.c
imx233/fuze+: correctly lcdif block
2011-09-13 23:39:18 +00:00
lcdif-imx233.h
imx233: add comment about block reset
2011-12-13 22:48:01 +00:00
lradc-imx233.c
imx233: fix prototype and battery conversion setup code
2011-11-14 21:47:59 +00:00
lradc-imx233.h
imx233: fix prototype and battery conversion setup code
2011-11-14 21:47:59 +00:00
mmc-imx233.c
imx233: fix to typo and remove a forgotten panic
2011-12-15 17:07:15 +00:00
pcm-imx233.c
imx233/fuze+: implement pcm out and audio codec, update SOURCES
2011-10-18 22:08:41 +00:00
pinctrl-imx233.c
pinctrl-imx233.h
power-imx233.c
imx233: add power debug screen
2011-11-30 18:47:31 +00:00
power-imx233.h
imx233: add power debug screen
2011-11-30 18:47:31 +00:00
powermgmt-imx233.c
imx233: implement battery reading using power register (automatically updated & scaled by lradc delay)
2011-11-14 21:45:25 +00:00
powermgmt-target.h
rtc-imx233.h
imx233/fuze+: add prototype for rtc block (only for register defines for now)
2011-10-18 22:08:38 +00:00
sd-imx233.c
Remove two useless variable and hopefully finally fix red
2011-12-15 17:28:30 +00:00
ssp-imx233.c
imx233/fuze+: add support for sd card, enable FAT16 support because it's common on sd cards
2011-12-15 17:06:55 +00:00
ssp-imx233.h
imx233/fuze+: add support for sd card, enable FAT16 support because it's common on sd cards
2011-12-15 17:06:55 +00:00
system-imx233.c
imx233/fuze+: set drive strength of tuner chip enable pin, enable backlight on panic
2011-11-17 23:10:22 +00:00
system-target.h
imx233/fuze+: fix typo and add dac dma/error interrupts
2011-10-18 21:58:18 +00:00
timer-imx233.c
imx233/fuze+: fix prototype
2011-09-13 23:39:15 +00:00
timrot-imx233.c
imx233/fuze+: move to a more generic xtal derived clock enabling function, fix timrot accordingly
2011-10-18 22:00:50 +00:00
timrot-imx233.h
usb-imx233.c
Simplify and neaten-up usb.c a bit. USB_INSERTED and USB_EXTRACTED are always used as events to indicate cable state. USB_HOSTED is posted to indicated that a host was detected.
2011-12-15 00:14:36 +00:00
usb-target.h
28dec004c0