rockbox/firmware/target/arm
Rafaël Carré 28bcc17dde revert r27044 (which was a revert of r26953 & r26954)
The bug was in playback.c and was fixed in previous commit

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27074 a1c6a512-1295-4272-9138-f99709370657
2010-06-23 04:34:23 +00:00
..
archos/av300
as3525 revert r27044 (which was a revert of r26953 & r26954) 2010-06-23 04:34:23 +00:00
at91sam
imx31 Configure Gigabeat S with EABI compiler by default. Implement the INIT section that this enables (due to selective need for long calls). Remove pcm_postinit from INIT section since it's asynchronous. Disable strict aliasing on SPC codec for now just to shut it up. 2010-06-11 14:39:35 +00:00
ipod iPod 3G: Ensure wheel repeats are not generated unless the same keycode is posted more than once in a row, regardless of velocity. Remove 'was_hold' from handle_scroll_wheel calls since the call is never reachable with was_hold being true. Just clear pending ints in one spot after setting levels. Init prev_scroll properly again in 3g case. 2010-06-21 18:47:42 +00:00
iriver FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
olympus FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
pbell FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
philips FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
pnx0101 Make PCM->driver interface about as simple as it will get. Registered callback, zero data, alignment and stops are handled entirely inside pcm.c; driver merely calls fixed pcm.c callback. Remove pcm_record_more and do it just like playback; the original reason behind it isn't very practical in general. Everything checks out on supported targets. There wer some compat changes I can't check out on many unsupoorted but if there's a problem it will be a minor oops. Plugins become incompatible due to recording tweak-- full update. Sorted API. 2010-05-24 16:42:32 +00:00
s3c2440 Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix. 2010-06-06 13:20:47 +00:00
s5l8700 Fix ata_idle_notify on iPod Nano 2G 2010-06-21 16:54:25 +00:00
samsung FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
sandisk lv24020lp tuner: On PP targets (c200/e200), use the atomic GPIO bitwise macros for the interface since it shares GPIOH with the clickwheel interrupt. 2010-06-22 04:00:34 +00:00
tatung
tcc77x
tcc780x change the D2 bootloader to boot rockbox by default. boot OF is hold is on or usb is connected 2010-06-21 10:51:39 +00:00
tms320dm320 Make sure files which aren't windows-specific use \n line endings only 2010-06-17 16:59:51 +00:00
adc-as3514.c adc-as3514.c: cosmetics 2010-05-15 19:44:54 +00:00
adc-pp5020.c
ascodec-pp.c
ascodec-target.h as3514/as3543 fixes 2010-05-17 20:53:25 +00:00
ata-as-arm.S FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
ata-nand-telechips.c
ata-pp5002.c
ata-pp5020.c
ata-sd-pp.c Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix. 2010-06-06 13:20:47 +00:00
ata-target.h
audio-pp.c
crt0-pp-bl.S
crt0-pp.S ARM: use BX when branch to an address in register 2010-05-31 15:14:26 +00:00
crt0.S arm/crt0.S: comment why the reset vector doesn't use absolute addressing 2010-06-18 18:31:14 +00:00
ffs-arm.S
i2c-pp.c
i2c-telechips.c Re-write the Telechips I2C delay routine in assembler to stop the compiler optimising it away. Tested with EABI and non-EABI compilers. 2010-06-16 21:03:57 +00:00
i2s-pp.c
kernel-pp.c
lcd-as-memframe.S FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
lcd-c200_c200v2.c Of course there's no mdelay on c200(v1), so just use udelay 2010-06-19 03:04:22 +00:00
lcd-ssd1815.c
memcpy-arm.S FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
memmove-arm.S FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
memset-arm.S FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
memset16-arm.S FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
mmu-arm.h
mmu-arm.S Update Samsung YP-S3 bootloader demo 2010-05-30 21:43:14 +00:00
mmu-armv6.S
pcm-pp.c pcm-pp: revert r26756 2010-06-11 11:25:16 +00:00
pcm-telechips.c Make PCM->driver interface about as simple as it will get. Registered callback, zero data, alignment and stops are handled entirely inside pcm.c; driver merely calls fixed pcm.c callback. Remove pcm_record_more and do it just like playback; the original reason behind it isn't very practical in general. Everything checks out on supported targets. There wer some compat changes I can't check out on many unsupoorted but if there's a problem it will be a minor oops. Plugins become incompatible due to recording tweak-- full update. Sorted API. 2010-05-24 16:42:32 +00:00
powermgmt-ascodec.c as3525v2: fix end of charge detection 2010-05-19 14:06:08 +00:00
sd-pp-target.h
support-arm.S ARM: __div0() takes no argument 2010-06-12 17:15:39 +00:00
system-arm.c __div0: give the address of the instruction calling division to UIE 2010-06-12 17:15:44 +00:00
system-arm.h
system-pp502x.c
system-pp5002.c Squeeze down the PP5002 cache routines a bit. 2010-06-18 06:54:58 +00:00
system-target.h
thread-arm.c FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
thread-pp.c For multiprocessor targets, do the thread_exit routine such that we don't need to rely on the compiler's good graces to have stack switching be reliable. Only needs a few asm instructions. 2010-06-18 03:10:18 +00:00
timer-pp.c
usb-drv-arc.c
usb-fw-pp502x.c
usb-fw-pp5002.c
usb-s3c6400x.c
usb-target.h
usb-tcc.c
wmcodec-pp.c FS#11417 by Joe Balough: fix audio/tuner on philips hdd6330 2010-06-19 03:51:57 +00:00
wmcodec-telechips.c