Dave Chapman 1672350378 FS #7691 - improved USB detection on PP devices. This patch modifies the target-tree function usb_detect() on all targets from bool to int, returning USB_INSERTED or USB_EXTRACTED instead of true or false. This was done to enable the PP usb_detect() to check for USB_POWER (either a connection to a USB wall charger, or the user holding "charge mode" button) and return that as a third value. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14600 a1c6a512-1295-4272-9138-f99709370657		2007-09-04 08:03:07 +00:00
..
adc-h100.c	H1x0, H300: Get rid of the adc tick, and use the same concept as the iAudio ADC driver.	2007-07-30 19:13:59 +00:00
adc-target.h	H1x0, H300: Get rid of the adc tick, and use the same concept as the iAudio ADC driver.	2007-07-30 19:13:59 +00:00
backlight-h100.c
button-h100.c
lcd-as-h100.S
lcd-h100.c
power-h100.c	Moved archos power handling into target tree. * Tuner power handling cleaned up a bit.	2007-08-14 22:06:23 +00:00
powermgmt-h100.c	First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.	2007-08-17 06:45:18 +00:00
spdif-h100.c
sw_i2c-h100.c	Forget all the nonsense with C delay loops. 'volatile' on the variable makes bloated code and a volatile, blank asm block inside may or may not be optimized out. Use asm delay loops instead for Coldfire. Radio i2c driver also needs NACK after reading last tuner byte. Get the volatile off the Ondio loops (not needed here now). Maybe this is straightened out now.	2007-06-27 03:11:49 +00:00
usb-h100.c	FS #7691 - improved USB detection on PP devices. This patch modifies the target-tree function usb_detect() on all targets from bool to int, returning USB_INSERTED or USB_EXTRACTED instead of true or false. This was done to enable the PP usb_detect() to check for USB_POWER (either a connection to a USB wall charger, or the user holding "charge mode" button) and return that as a third value.	2007-09-04 08:03:07 +00:00