Dave Chapman
|
1672350378
|
FS #7691 - improved USB detection on PP devices. This patch modifies the target-tree function usb_detect() on all targets from bool to int, returning USB_INSERTED or USB_EXTRACTED instead of true or false. This was done to enable the PP usb_detect() to check for USB_POWER (either a connection to a USB wall charger, or the user holding "charge mode" button) and return that as a third value.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14600 a1c6a512-1295-4272-9138-f99709370657
|
2007-09-04 08:03:07 +00:00 |
|
Jens Arnold
|
0fac492c3d
|
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
|
2007-08-17 06:45:18 +00:00 |
|
Jens Arnold
|
8a177345ce
|
Moved archos power handling into target tree. * Tuner power handling cleaned up a bit.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14345 a1c6a512-1295-4272-9138-f99709370657
|
2007-08-14 22:06:23 +00:00 |
|
Nils Wallménius
|
f28da1a35a
|
Enable a lot more features for simulators and add stubs where necessary, simulators should now work with identical lng and voice files as the respective target
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14299 a1c6a512-1295-4272-9138-f99709370657
|
2007-08-12 19:49:03 +00:00 |
|
Jens Arnold
|
2e2f92c906
|
H1x0, H300: Get rid of the adc tick, and use the same concept as the iAudio ADC driver.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14079 a1c6a512-1295-4272-9138-f99709370657
|
2007-07-30 19:13:59 +00:00 |
|
Michael Sevakis
|
7d759f6b9c
|
Do some planned radio interface cleanup since adding in the LV24020LP.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13880 a1c6a512-1295-4272-9138-f99709370657
|
2007-07-14 11:20:31 +00:00 |
|
Magnus Holmgren
|
7d5deaa5a0
|
H1x0: Increase delay during button reads. Hopefully fixes the scroll down problem (see forum thread 11081.0).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13765 a1c6a512-1295-4272-9138-f99709370657
|
2007-07-02 18:47:02 +00:00 |
|
Michael Sevakis
|
070417d152
|
Forget all the nonsense with C delay loops. 'volatile' on the variable makes bloated code and a volatile, blank asm block inside may or may not be optimized out. Use asm delay loops instead for Coldfire. Radio i2c driver also needs NACK after reading last tuner byte. Get the volatile off the Ondio loops (not needed here now). Maybe this is straightened out now.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13725 a1c6a512-1295-4272-9138-f99709370657
|
2007-06-27 03:11:49 +00:00 |
|
Nils Wallménius
|
8dc1a67bba
|
Fix iriver H100 i2c driver which was broken by the switch to build with -Os. Fixes FS#7316 and FS#7321
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13676 a1c6a512-1295-4272-9138-f99709370657
|
2007-06-19 20:39:30 +00:00 |
|
Michael Sevakis
|
2d48d0ffa6
|
Straighten out some audio path APIs and misc. audio stuff. Having recording is not a prerequisite to having input/output source selection which is probably most useful when adding a audio input features like FM to a new port without forcing recording to be implemented first.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13599 a1c6a512-1295-4272-9138-f99709370657
|
2007-06-08 23:42:04 +00:00 |
|
Michael Sevakis
|
633f388002
|
Coldfire targets: Shuffle IRQ levels around to have all interaction between low level audio function calls and DMA be atomic. Make recording and playback independently startable and stoppable so one can be running and not interfere with the other. All tests I can do at the moment check out ok (play, record, play+record, FM radio on iRivers, S/PDIF on H120 (w/running optical on/off), and on-the-fly samplerate changes). Recording tested for well over an hour run and no problems.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12658 a1c6a512-1295-4272-9138-f99709370657
|
2007-03-07 06:23:02 +00:00 |
|
Michael Sevakis
|
198772a6b2
|
iRiver H100 series: Catching up on old work. Use a better way to keep playback going when switching optical output. Doesn't mess with the DMA peripheral requests to do it like before but just writes a sample to the FIFO. Would really like to reformulate interrupt scheme on Coldfire to allow DMA interrupts to be blocked specifically but not normally.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12605 a1c6a512-1295-4272-9138-f99709370657
|
2007-03-04 21:43:35 +00:00 |
|
Robert Kukla
|
50b5ee4781
|
FS#6419 - driver for H1x0 series RTC Mod with runtime detection
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12520 a1c6a512-1295-4272-9138-f99709370657
|
2007-02-28 13:20:36 +00:00 |
|
Jens Arnold
|
51223e5395
|
Introduced LCD_FBHEIGHT in addition to the already existing LCD_FBWIDTH to ease framebuffer handling a bit. Added equivalent definitions for the remote LCD.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12419 a1c6a512-1295-4272-9138-f99709370657
|
2007-02-20 19:31:34 +00:00 |
|
Jens Arnold
|
c652218d14
|
Fix remaining CONFIG_TUNER checks.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12385 a1c6a512-1295-4272-9138-f99709370657
|
2007-02-18 08:46:12 +00:00 |
|
Magnus Holmgren
|
1916576728
|
Keep delay loop from being optimized away.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12367 a1c6a512-1295-4272-9138-f99709370657
|
2007-02-17 23:06:50 +00:00 |
|
Miika Pekkarinen
|
73cd9f3b63
|
Turn backlight ON at boot unless bootloader has already done that.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11992 a1c6a512-1295-4272-9138-f99709370657
|
2007-01-12 20:26:23 +00:00 |
|
Michael Sevakis
|
81484e4b75
|
H1x0: Enable optical output to be switched on or off during playback and recording. Fixes FS#6414 - H120 opto out toggle freezes codec. Really DMA just needed a kickstart after setting the optical TXSRC if the peripheral requests were currently enabled (the method of detection).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11661 a1c6a512-1295-4272-9138-f99709370657
|
2006-12-05 07:38:55 +00:00 |
|
Linus Nielsen Feltzing
|
516d277958
|
The ADC GPIO init code for the H100 was accidentally put in the H300 driver when moving to the target tree
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11582 a1c6a512-1295-4272-9138-f99709370657
|
2006-11-24 11:06:52 +00:00 |
|
Michael Sevakis
|
4a82f81f79
|
H100 series: Adjusted gray scale balance and default contrast for more linear gray levels.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11564 a1c6a512-1295-4272-9138-f99709370657
|
2006-11-21 17:14:07 +00:00 |
|
Michael Sevakis
|
cc50c149e9
|
H100/General: HAL for S/PDIF and refinement/bufixes in optical output powering/source selection.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11523 a1c6a512-1295-4272-9138-f99709370657
|
2006-11-13 23:21:54 +00:00 |
|
Michael Sevakis
|
58825f6e73
|
Coldfire targets: Got the rest of the coldfire code out of backlight.c. Straightened up related items in configs and split backlight_set_brightness between the normal and boot/sim builds like the other functions. Should really have done all that in the first place.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11502 a1c6a512-1295-4272-9138-f99709370657
|
2006-11-10 18:47:41 +00:00 |
|
Michael Sevakis
|
f64f589d2e
|
H100/120: Split lcd driver into pixel format and device specific parts. Adjustment of contrast range to just a little less than white to a little more than black. Really only had to reset minimum.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11487 a1c6a512-1295-4272-9138-f99709370657
|
2006-11-10 00:02:28 +00:00 |
|
Michael Sevakis
|
a32b33bf83
|
Forgot to cvs add lcd-as-h100.S.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11469 a1c6a512-1295-4272-9138-f99709370657
|
2006-11-08 16:22:30 +00:00 |
|
Michael Sevakis
|
e89a3940f9
|
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
|
2006-11-08 16:13:04 +00:00 |
|
Jonathan Gordon
|
139f9f28e9
|
move the iriver h1x0/h3x0 targets to the target tree
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11392 a1c6a512-1295-4272-9138-f99709370657
|
2006-10-30 08:56:06 +00:00 |
|
Jens Arnold
|
62a11ea9e6
|
Removed unnecessary #include s.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11385 a1c6a512-1295-4272-9138-f99709370657
|
2006-10-29 19:29:41 +00:00 |
|
Jonathan Gordon
|
cad563b00f
|
move the iriver h1x0/h3x0 button driver to target tree
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11380 a1c6a512-1295-4272-9138-f99709370657
|
2006-10-29 10:26:41 +00:00 |
|