1cb3ff0ab0
1) fix driver from reading invalid home button while lcd updates (use old value then) 2) put in a 1s delay for power button reading after releasing hold 3) revert r20028, I thought it wasn't needed, since I didn't update the bootloader 4) enable hold for the bootloader (even though not really needed, but is consistent with other targets) 5) let button_dbop return DBOP_DIN, and do the reading in button_read_device 6) various cleanups git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20054 a1c6a512-1295-4272-9138-f99709370657
256 lines
7.1 KiB
C
256 lines
7.1 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2008 by Thomas Martitz
|
|
* Copyright (C) 2008 by Dominik Wenger
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
|
|
|
|
/* Basic button driver for the Fuze
|
|
*
|
|
* TODO: - Get the wheel working with interrupts
|
|
* - find that Home button
|
|
*/
|
|
|
|
#include "system.h"
|
|
#include "button.h"
|
|
#include "button-target.h"
|
|
#include "backlight.h"
|
|
|
|
#define WHEEL_REPEAT_INTERVAL 30
|
|
#define WHEELCLICKS_PER_ROTATION 48 /* wheelclicks per full rotation */
|
|
|
|
/* Buttons */
|
|
static bool hold_button = false;
|
|
#ifndef BOOTLOADER
|
|
static bool hold_button_old = false;
|
|
#endif
|
|
static short _dbop_din = BUTTON_NONE;
|
|
|
|
/* in the lcd driver */
|
|
extern bool lcd_button_support(void);
|
|
|
|
void button_init_device(void)
|
|
{
|
|
GPIOA_DIR |= (1<<1);
|
|
GPIOA_PIN(1) = (1<<1);
|
|
}
|
|
|
|
#if !defined(BOOTLOADER) && defined(HAVE_SCROLLWHEEL)
|
|
static void scrollwheel(void)
|
|
{
|
|
static unsigned old_wheel_value = 0;
|
|
static unsigned wheel_value = 0;
|
|
static unsigned wheel_repeat = BUTTON_NONE;
|
|
unsigned btn = BUTTON_NONE;
|
|
/* getting BUTTON_REPEAT works like this: We increment repeat by 2 if the
|
|
* wheel was turned, and decrement it by 1 each tick,
|
|
* that means: if you change the wheel fast enough, repeat will be >1 and
|
|
* we send BUTTON_REPEAT
|
|
*/
|
|
static int repeat = 0;
|
|
/* we omit 3 of 4 posts to the button_queue, that works better, so count */
|
|
static int counter = 0;
|
|
/* Read wheel
|
|
* Bits 13 and 14 of DBOP_DIN change as follows:
|
|
* Clockwise rotation 00 -> 01 -> 11 -> 10 -> 00
|
|
* Counter-clockwise 00 -> 10 -> 11 -> 01 -> 00
|
|
*/
|
|
static const unsigned char wheel_tbl[2][4] =
|
|
{
|
|
{ 2, 0, 3, 1 }, /* Clockwise rotation */
|
|
{ 1, 3, 0, 2 }, /* Counter-clockwise */
|
|
};
|
|
wheel_value = _dbop_din & (1<<13|1<<14);
|
|
wheel_value >>= 13;
|
|
|
|
if (old_wheel_value == wheel_tbl[0][wheel_value])
|
|
btn = BUTTON_SCROLL_FWD;
|
|
else if (old_wheel_value == wheel_tbl[1][wheel_value])
|
|
btn = BUTTON_SCROLL_BACK;
|
|
|
|
if (btn != BUTTON_NONE)
|
|
{
|
|
if (btn != wheel_repeat)
|
|
{
|
|
/* direction reversals nullify repeats */
|
|
wheel_repeat = btn;
|
|
repeat = 0;
|
|
}
|
|
if (btn != BUTTON_NONE)
|
|
{
|
|
/* generate repeats if quick enough */
|
|
if (repeat > 0)
|
|
{
|
|
btn |= BUTTON_REPEAT;
|
|
}
|
|
repeat += 2;
|
|
/* the wheel is more reliable if we don't send ever change,
|
|
* every 4th is basically one "physical click" is 1 item in
|
|
* the rockbox menus */
|
|
if (queue_empty(&button_queue) && ++counter >= 4)
|
|
{
|
|
buttonlight_on();
|
|
backlight_on();
|
|
queue_post(&button_queue, btn, 1<<24);
|
|
/* message posted - reset count */
|
|
counter = 0;
|
|
}
|
|
}
|
|
}
|
|
if (repeat > 0)
|
|
repeat--;
|
|
else
|
|
repeat = 0;
|
|
old_wheel_value = wheel_value;
|
|
}
|
|
#endif /* !defined(BOOTLOADER) && defined(SCROLLWHEEL) */
|
|
|
|
bool button_hold(void)
|
|
{
|
|
return hold_button;
|
|
}
|
|
|
|
static short button_dbop(void)
|
|
{
|
|
/* skip home reading if lcd_button_support was blocked,
|
|
* since the dbop bit 15 is invalid then, and use the old value instead */
|
|
/* -20 (arbitary value) indicates valid home button read */
|
|
int old_home = -20;
|
|
int delay = 0;
|
|
if(!lcd_button_support())
|
|
old_home = (_dbop_din & 1<<15);
|
|
|
|
/* Wait for fifo to empty */
|
|
while ((DBOP_STAT & (1<<10)) == 0);
|
|
|
|
DBOP_CTRL |= (1<<19);
|
|
DBOP_CTRL &= ~(1<<16); /* disable output */
|
|
|
|
DBOP_TIMPOL_01 = 0xe167e167;
|
|
DBOP_TIMPOL_23 = 0xe167006e;
|
|
|
|
while(delay++ < 64);
|
|
|
|
DBOP_CTRL |= (1<<15); /* start read */
|
|
((DBOP_STAT & (1<<16)) == 0); /* wait for valid data */
|
|
|
|
_dbop_din = DBOP_DIN; /* now read */
|
|
|
|
DBOP_TIMPOL_01 = 0x6e167;
|
|
DBOP_TIMPOL_23 = 0xa167e06f;
|
|
|
|
DBOP_CTRL |= (1<<16);
|
|
DBOP_CTRL &= ~(1<<19);
|
|
|
|
if (old_home != -20)
|
|
_dbop_din |= old_home;
|
|
return _dbop_din;
|
|
}
|
|
|
|
/* for the debug menu */
|
|
short button_dbop_data(void)
|
|
{
|
|
return _dbop_din;
|
|
}
|
|
|
|
static int button_gpio(void)
|
|
{
|
|
int btn = BUTTON_NONE;
|
|
if(hold_button)
|
|
return btn;
|
|
/* set afsel, so that we can read our buttons */
|
|
GPIOC_AFSEL &= ~(1<<2|1<<3|1<<4|1<<5|1<<6);
|
|
/* set dir so we can read our buttons (but reset the C pins first) */
|
|
GPIOB_DIR &= ~(1<<4);
|
|
GPIOC_DIR |= (1<<2|1<<3|1<<4|1<<5|1<<6);
|
|
GPIOC_PIN(2) = (1<<2);
|
|
GPIOC_PIN(3) = (1<<3);
|
|
GPIOC_PIN(4) = (1<<4);
|
|
GPIOC_PIN(5) = (1<<5);
|
|
GPIOC_PIN(6) = (1<<6);
|
|
|
|
GPIOC_DIR &= ~(1<<2|1<<3|1<<4|1<<5|1<<6);
|
|
|
|
/* small delay needed to read buttons correctly */
|
|
int delay = 0;
|
|
while(delay++ < 32);
|
|
|
|
/* direct GPIO connections */
|
|
if (!GPIOC_PIN(3))
|
|
btn |= BUTTON_LEFT;
|
|
if (!GPIOC_PIN(2))
|
|
btn |= BUTTON_UP;
|
|
if (!GPIOC_PIN(6))
|
|
btn |= BUTTON_DOWN;
|
|
if (!GPIOC_PIN(5))
|
|
btn |= BUTTON_RIGHT;
|
|
if (!GPIOC_PIN(4))
|
|
btn |= BUTTON_SELECT;
|
|
/* return to settings needed for lcd */
|
|
GPIOC_DIR |= (1<<2|1<<3|1<<4|1<<5|1<<6);
|
|
GPIOC_AFSEL |= (1<<2|1<<3|1<<4|1<<5|1<<6);
|
|
|
|
return btn;
|
|
}
|
|
|
|
/*
|
|
* Get button pressed from hardware
|
|
*/
|
|
int button_read_device(void)
|
|
{
|
|
int btn = BUTTON_NONE;
|
|
short dbop = button_dbop();
|
|
static unsigned power_counter = HZ;
|
|
/* hold button */
|
|
if(dbop & (1<<12))
|
|
{
|
|
power_counter = 0;
|
|
hold_button = true;
|
|
}
|
|
else
|
|
{
|
|
/* might wrap, but shouldn't be much of an issue*/
|
|
power_counter++;
|
|
hold_button = false;
|
|
#if defined(HAVE_SCROLLWHEEL) && !defined(BOOTLOADER)
|
|
/* read wheel on bit 13 & 14, but sent to the button queue seperately */
|
|
scrollwheel();
|
|
#endif
|
|
/* read power on bit 8, but not if hold button was just released, since
|
|
* you basically always hit power due to the slider mechanism after releasing
|
|
* hold (wait ~1 sec) */
|
|
if (dbop & (1<<8) && power_counter>HZ)
|
|
btn |= BUTTON_POWER;
|
|
/* read home on bit 15 */
|
|
if (!(dbop & (1<<15)))
|
|
btn |= BUTTON_HOME;
|
|
btn |= button_gpio();
|
|
}
|
|
|
|
#ifndef BOOTLOADER
|
|
/* light handling */
|
|
if (hold_button != hold_button_old)
|
|
{
|
|
hold_button_old = hold_button;
|
|
backlight_hold_changed(hold_button);
|
|
}
|
|
#endif /* BOOTLOADER */
|
|
|
|
return btn;
|
|
}
|