Thomas Martitz 1cb3ff0ab0 Sansa Fuze buttons: ... 1) fix driver from reading invalid home button while lcd updates (use old value then) 2) put in a 1s delay for power button reading after releasing hold 3) revert r20028, I thought it wasn't needed, since I didn't update the bootloader 4) enable hold for the bootloader (even though not really needed, but is consistent with other targets) 5) let button_dbop return DBOP_DIN, and do the reading in button_read_device 6) various cleanups git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20054 a1c6a512-1295-4272-9138-f99709370657		2009-02-19 21:20:42 +00:00
..
sansa-c200v2	Redo some parts of my previous commit, thanks Jens and Dave	2009-01-27 19:45:00 +00:00
sansa-clip	Sansa Clip: enable battery charging.	2009-02-14 16:19:21 +00:00
sansa-e200v2	Sansa e200v2: Some LCD driver changes (none with functional changes):	2009-02-19 20:40:00 +00:00
sansa-fuze	Sansa Fuze buttons:	2009-02-19 21:20:42 +00:00
sansa-m200v4	Redo some parts of my previous commit, thanks Jens and Dave	2009-01-27 19:45:00 +00:00
adc-target.h
app.lds	Sansa AMS "High Mem" : fix main binary linking broken by r19342	2008-12-04 23:03:05 +00:00
ascodec-as3525.c	Renamed as3525-codec.c to ascodec-as3525.c to bring it in line with the naming convention of the other driver	2008-12-17 20:16:20 +00:00
ascodec-target.h
ata_sd_as3525.c	Unify kernel list management for ticks, registered queues and timeout objects by using NULL-terminated lists of pointers. Redo timeout API a bit to simplify it and integrate it. Should give some small binsize reduction accross the board but more if timeout objects are being included.	2009-01-21 02:44:20 +00:00
audio-as3525.c	FS#9611 - Sansa Clip radio code. Commit final part which enables the LINE2 input that carries the analog radio signal on ams sansas.	2009-02-05 19:57:18 +00:00
backlight-e200v2-fuze.c	Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S	2009-01-26 23:21:49 +00:00
boot.lds
clock-target.h	Updated Fuze button code. FS#9645 by Thomas Martitz.	2008-12-31 21:02:56 +00:00
debug-as3525.c	Fix stupid typo...	2009-02-19 17:43:19 +00:00
debug-target.h	Some Sansa Fuze work: Get Home button working (no keymap changes yet, so it's not very noticeable) and "fix" debug menu from not showing the dbop data (see FIXME), some cleanup in the fuze's button driver	2009-02-17 02:36:48 +00:00
dma-pl081.c	Sansa AMS : use SD controller status to notify end of data transfer	2009-01-08 08:27:42 +00:00
dma-target.h	Sansa AMS : use SD controller status to notify end of data transfer	2009-01-08 08:27:42 +00:00
fmradio-i2c-as3525.c	AMS Sansa: add fmradio i2c support for e200v2 and the fuze, by Thomas Martitz and Michael Chicoine	2008-12-16 22:58:47 +00:00
i2c-as3525.c
i2s-as3525.c
kernel-as3525.c	Sansa AMS: correct VIC registers usage	2008-12-05 14:37:28 +00:00
pcm-as3525.c	Fixed compiler warnings.	2008-12-20 20:48:27 +00:00
power-as3525.c	Make si4700 tuner driver more sane with bit and field defines and entirely hide strange i2c interface from code with write/set/clear/masked functionality. On Gigabeat S use by-the-book busmode selection and GPIO lines. Implement some primitive station detection, debug registers in screen, and misc. changes to tie things together.	2008-12-27 19:18:50 +00:00
powermgmt-as3525.c
system-as3525.c	Commit stable parts of FS#9611 - Sansa Clip radio code	2009-01-21 20:51:43 +00:00
system-target.h	Sansa AMS: centralize clock settings in clock-target.h	2008-12-04 20:04:31 +00:00
timer-target.h	Sansa AMS: correct timer definition (clk_main == 24MHz / 16)	2008-11-26 14:40:57 +00:00
usb-as3525.c	Fixed m200v4 red build.	2008-12-30 21:56:23 +00:00