Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm/imx31
History
Michael Sevakis 1b275d8ddb Some static data is only used by .init functions. Add .initdata to declare such data (otherwise section conflicts arise). For i.MX31, use INITDATA_ATTR in the appropriate places. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29008 a1c6a512-1295-4272-9138-f99709370657
2011-01-08 20:42:51 +00:00
..
gigabeat-s Some static data is only used by .init functions. Add .initdata to declare such data (otherwise section conflicts arise). For i.MX31, use INITDATA_ATTR in the appropriate places. 2011-01-08 20:42:51 +00:00
app.lds Some static data is only used by .init functions. Add .initdata to declare such data (otherwise section conflicts arise). For i.MX31, use INITDATA_ATTR in the appropriate places. 2011-01-08 20:42:51 +00:00
ata-imx31.c Gigabeat S: Use statically initialized channel descriptors. Also, there's no need for them to be in non-cached memory since they're only used on the AP side. 2010-06-24 08:40:05 +00:00
ata-target.h Rework ATA driver to get rid of lots of target-specific constants and allow for non-memory-mapped task file registers. 2011-01-02 22:51:47 +00:00
avic-imx31.c Configure Gigabeat S with EABI compiler by default. Implement the INIT section that this enables (due to selective need for long calls). Remove pcm_postinit from INIT section since it's asynchronous. Disable strict aliasing on SPC codec for now just to shut it up. 2010-06-11 14:39:35 +00:00
avic-imx31.h Gigabeat S/i.MX31: Take care of an interrupt priority inversion that can happen during PCM callback lockout when DVFS switches frequecies during the lockout, preventing a thread from unlocking the callback until DVFS finishes, causing an SSI FIFO underrun. Hadn't thought of an acceptable way to deal with it before. 2011-01-07 20:40:36 +00:00
boot.lds Some static data is only used by .init functions. Add .initdata to declare such data (otherwise section conflicts arise). For i.MX31, use INITDATA_ATTR in the appropriate places. 2011-01-08 20:42:51 +00:00
ccm-imx31.c Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout. 2010-06-30 02:02:46 +00:00
ccm-imx31.h i.MX31/Gigabeat S: Implement frequency and voltage scaling-- 1.6V for 528MHz, and 1.35V for 264MHz and 132MHz. Keep DPTC overdrive ( > 400MHz) voltage scaling off for now because of uncertainties. Simplify the (working) mess later. 2010-04-23 15:32:50 +00:00
crt0.S Configure Gigabeat S with EABI compiler by default. Implement the INIT section that this enables (due to selective need for long calls). Remove pcm_postinit from INIT section since it's asynchronous. Disable strict aliasing on SPC codec for now just to shut it up. 2010-06-11 14:39:35 +00:00
debug-imx31.c move dbg_ports() from apps/menu_debug.c to target tree. FS#11712 by me. 2010-11-06 14:24:25 +00:00
debug-target.h move dbg_ports() from apps/menu_debug.c to target tree. FS#11712 by me. 2010-11-06 14:24:25 +00:00
dvfs_dptc-imx31.c Gigabeat S/i.MX31: Take care of an interrupt priority inversion that can happen during PCM callback lockout when DVFS switches frequecies during the lockout, preventing a thread from unlocking the callback until DVFS finishes, causing an SSI FIFO underrun. Hadn't thought of an acceptable way to deal with it before. 2011-01-07 20:40:36 +00:00
dvfs_dptc-imx31.h Gigabeat S/i.MX31: Take care of an interrupt priority inversion that can happen during PCM callback lockout when DVFS switches frequecies during the lockout, preventing a thread from unlocking the callback until DVFS finishes, causing an SSI FIFO underrun. Hadn't thought of an acceptable way to deal with it before. 2011-01-07 20:40:36 +00:00
gpio-imx31.c Configure Gigabeat S with EABI compiler by default. Implement the INIT section that this enables (due to selective need for long calls). Remove pcm_postinit from INIT section since it's asynchronous. Disable strict aliasing on SPC codec for now just to shut it up. 2010-06-11 14:39:35 +00:00
gpio-imx31.h i.MX31/Gigabeat S minor cleaning: Make HW access more obvious in places I forgot to do earlier. Reduce the number of structs that need to be filled-out for some drivers just to simplify a little. Change some types. 2010-05-07 10:53:19 +00:00
i2c-imx31.c i.MX31: Make some style changes to some driver code so that hardware vs. variable access is more obvious to the eye. Change a few data types and qualifiers. No functional differences. 2010-05-07 02:29:18 +00:00
i2c-imx31.h i.MX31: Make some style changes to some driver code so that hardware vs. variable access is more obvious to the eye. Change a few data types and qualifiers. No functional differences. 2010-05-07 02:29:18 +00:00
iomuxc-imx31.c Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout. 2010-06-30 02:02:46 +00:00
iomuxc-imx31.h i.MX31: Add some enums and a couple helper functions to make dealing with pin muxing and pad configuration a bit more sane. Convert any existing code which changes mux/pad settings to use helpers. 2010-04-23 13:46:04 +00:00
mc13783-imx31.c Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout. 2010-06-30 02:02:46 +00:00
mmu-imx31.c Gigabeat S/i.MX31: Sort files in the /target tree into things that are SoC-generic (into /imx31) and player-specific (into /gigabeat-s, based upon current appearances). Move i2s clock init into the appropriate file. Housekeeping only-- no functional changes. 2010-04-09 01:21:53 +00:00
mmu-imx31.h Gigabeat S/i.MX31: Sort files in the /target tree into things that are SoC-generic (into /imx31) and player-specific (into /gigabeat-s, based upon current appearances). Move i2s clock init into the appropriate file. Housekeeping only-- no functional changes. 2010-04-09 01:21:53 +00:00
rolo_restart_firmware.S Introduce NORETURN_ATTR wrapper for __attribute__((noreturn)), using this and a bit further cleanup in main gets rid of a warning when compiling for android. 2010-08-12 13:38:25 +00:00
sdma-imx31.c i.MX31: Make DMA ISR call loop a bit more efficient. 2010-06-30 07:08:10 +00:00
sdma-imx31.h
sdma_script_code.h Some static data is only used by .init functions. Add .initdata to declare such data (otherwise section conflicts arise). For i.MX31, use INITDATA_ATTR in the appropriate places. 2011-01-08 20:42:51 +00:00
sdma_struct.h Fix tabs 2010-01-03 10:19:43 +00:00
serial-imx31.h Gigabeat S/i.MX31: Sort files in the /target tree into things that are SoC-generic (into /imx31) and player-specific (into /gigabeat-s, based upon current appearances). Move i2s clock init into the appropriate file. Housekeeping only-- no functional changes. 2010-04-09 01:21:53 +00:00
spi-imx31.c Configure Gigabeat S with EABI compiler by default. Implement the INIT section that this enables (due to selective need for long calls). Remove pcm_postinit from INIT section since it's asynchronous. Disable strict aliasing on SPC codec for now just to shut it up. 2010-06-11 14:39:35 +00:00
spi-imx31.h Gigabeat S: Implement LCD contrast, invert and flip modes. Enhance LCD power management. Include init data but it's not needed yet (identical to Gigabeat F). 2010-05-18 23:50:00 +00:00