rockbox/firmware/export/config
Dana Conrad 3e7a09cb0d New Port: Eros Q Native
What works:
- LCD: 16-bit RGB565
- all buttons, including scrollwheel
- SD Card
- Battery level and charging/not charging status
- USB
- audio
- sample rate switching
- HP / LO detect, with "safe" fixed LO volume -
   LO volume will only be put to user-defined max volume
   if headphones are not present.
- rtc
- Plugins build, tried a couple and they seem OK
- Bootloader, installable to nand via usbboot

What doesn't work:
- Dual Boot
- power on/off has intermittent, low volume audio click
   (sometimes it's completely silent, sometimes there's
    a click)
- Audio uses 16-bit volume scaling, so clicking/popping
   is pretty bad at lower volumes - need 32 bit volume
   scaling, 24 bit I2S data
- USB HID keys not yet defined
- no jztool support

Unknowns:
- Stereo Switch pins: Direction select, AC_DC
   (probably not even hooked up)
- What is the actual purpose of the Stereo Swtich?
- How does the bluetooth module connect?

"Someday" stuff:
- get LCD working at higher bit depth
- Bluetooth

Change-Id: I70dda8fc092c6e3f4352f2245e4164193f803c33
2021-07-18 12:14:35 +00:00
..
agptekrocker.h Rocker Add WPS and Tree Hotkey, button codes in debug menu 2020-11-12 01:22:32 -05:00
aigoerosq.h ErosQ: Small keymap changes 2021-05-12 11:01:27 +00:00
android.h codecs: Add support for the 'VTX' ZX Spectrum chiptunes format. 2020-10-09 11:39:25 -04:00
cowond2.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
creativezen.h imx233: Enable 96/192K playback for all imx233 targets that have room 2020-10-03 16:56:19 -04:00
creativezenmozaic.h imx233: Enable 96/192K playback for all imx233 targets that have room 2020-10-03 16:56:19 -04:00
creativezenv.h imx233: Enable 96/192K playback for all imx233 targets that have room 2020-10-03 16:56:19 -04:00
creativezenxfi.h imx233: Enable 96/192K playback for all imx233 targets that have room 2020-10-03 16:56:19 -04:00
creativezenxfi2.h imx233: Enable 96/192K playback for all imx233 targets that have room 2020-10-03 16:56:19 -04:00
creativezenxfi3.h imx233: Enable 96/192K playback for all imx233 targets that have room 2020-10-03 16:56:19 -04:00
creativezenxfistyle.h imx233: Enable 96/192K playback for all imx233 targets that have room 2020-10-03 16:56:19 -04:00
creativezv.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
erosqnative.h New Port: Eros Q Native 2021-07-18 12:14:35 +00:00
fiiom3k.h Spin off common ft6x06 code to a driver 2021-06-11 20:09:38 +01:00
fiiom3klinux.h alsa: instead of per-target tests, use HAVE_ALSA_32BIT 2021-04-08 23:02:15 -04:00
gigabeatfx.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
gigabeats.h codecs: Add support for the 'VTX' ZX Spectrum chiptunes format. 2020-10-09 11:39:25 -04:00
gogearhdd1630.h hdd1630/hdd6330: update battery capacities 2021-04-04 13:27:00 +00:00
gogearhdd6330.h hdd1630/hdd6330: update battery capacities 2021-04-04 13:27:00 +00:00
gogearsa9200.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
hibylinux.h hosted: Consolidate the code that polls the battery charging status 2021-03-10 18:29:29 -05:00
hifietma8.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
hifietma8c.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
hifietma9.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
hifietma9c.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
hifimanhm60x.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
hifimanhm801.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
iaudiom3.h coldfire: make the RAM and ROM image locations configurable by macros 2020-10-26 01:07:14 +00:00
iaudiom5.h coldfire: make the RAM and ROM image locations configurable by macros 2020-10-26 01:07:14 +00:00
iaudiox5.h coldfire: make the RAM and ROM image locations configurable by macros 2020-10-26 01:07:14 +00:00
ibassodx50.h ibasso: DX50/DX90 support 192KHz audio 2021-05-13 21:40:22 -04:00
ibassodx90.h ibasso: DX50/DX90 support 192KHz audio 2021-05-13 21:40:22 -04:00
ihifi760.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
ihifi770.h rk27xx: Get rid of duplicate STORAGE_WANTS_ALIGN 2021-03-25 12:23:06 -04:00
ihifi770c.h rk27xx: Get rid of duplicate STORAGE_WANTS_ALIGN 2021-03-25 12:23:06 -04:00
ihifi800.h rk27xx: Get rid of duplicate STORAGE_WANTS_ALIGN 2021-03-25 12:23:06 -04:00
ihifi960.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
ipod1g2g.h FS#9295: Detect external power supply for ipod 1st & 2nd gen (Mark Fawcus) 2020-08-06 09:28:28 -04:00
ipod3g.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
ipod4g.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
ipod6g.h ipod6g: increase max battery capacity 2021-03-12 14:39:03 +00:00
ipodcolor.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
ipodmini1g.h Disable 88/96KHz from targets that lack the IRAM to hold the mix buffers 2020-10-03 15:27:30 -04:00
ipodmini2g.h Disable 88/96KHz from targets that lack the IRAM to hold the mix buffers 2020-10-03 15:27:30 -04:00
ipodnano1g.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
ipodnano2g.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
ipodvideo.h FS13274: Bump max battery capacity for iPod Videos to 3000mAh 2021-03-15 12:17:30 +00:00
iriverh10.h Disable 88/96KHz from targets that lack the IRAM to hold the mix buffers 2020-10-03 15:27:30 -04:00
iriverh10_5gb.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
iriverh100.h iriver_flash: refactor code to be easier to understand 2020-11-11 13:30:09 +00:00
iriverh120.h iriver_flash: refactor code to be easier to understand 2020-11-11 13:30:09 +00:00
iriverh300.h iriver_flash: refactor code to be easier to understand 2020-11-11 13:30:09 +00:00
librockplay.h buflib: Check the validity of of handles passed to buflib_get_data() in DEBUG builds. 2014-02-02 16:59:29 +01:00
lyreproto1.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
meizum3.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
meizum6sl.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
meizum6sp.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
mini2440.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
mpiohd200.h coldfire: make the RAM and ROM image locations configurable by macros 2020-10-26 01:07:14 +00:00
mpiohd300.h coldfire: make the RAM and ROM image locations configurable by macros 2020-10-26 01:07:14 +00:00
mrobe100.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
mrobe500.h Whitespace cleanup on fb_viewport Rewrite 2020-10-26 12:38:22 -04:00
nokian8xx.h codecs: Add support for the 'VTX' ZX Spectrum chiptunes format. 2020-10-09 11:39:25 -04:00
nokian900.h codecs: Add support for the 'VTX' ZX Spectrum chiptunes format. 2020-10-09 11:39:25 -04:00
ondavx747.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
ondavx767.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
ondavx777.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
pandora.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
rk27generic.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
samsungyh820.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
samsungyh920.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
samsungyh925.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
samsungypr0.h samsungyp: Enable recording feature. No idea if it works. :D 2020-10-23 17:49:07 -04:00
samsungypr1.h samsungyp: Enable recording feature. No idea if it works. :D 2020-10-23 17:49:07 -04:00
samsungyps3.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
samsungypz5.h audio: Add support for 192 and 176KHz playback 2020-09-30 21:37:11 -04:00
sansac200.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
sansac200v2.h audio: Add support for 192 and 176KHz playback 2020-09-30 21:37:11 -04:00
sansaclip.h audio: Add support for 192 and 176KHz playback 2020-09-30 21:37:11 -04:00
sansaclipplus.h audio: Add support for 192 and 176KHz playback 2020-09-30 21:37:11 -04:00
sansaclipv2.h audio: Add support for 192 and 176KHz playback 2020-09-30 21:37:11 -04:00
sansaclipzip.h audio: Add support for 192 and 176KHz playback 2020-09-30 21:37:11 -04:00
sansaconnect.h Sansa Connect: Read HDQ battery data 2021-07-07 08:24:01 +02:00
sansae200.h Enable boot from SD for Sansa e200 2020-08-19 19:17:01 -04:00
sansae200v2.h audio: Add support for 192 and 176KHz playback 2020-09-30 21:37:11 -04:00
sansafuze.h audio: Add support for 192 and 176KHz playback 2020-09-30 21:37:11 -04:00
sansafuzeplus.h FuzePlus USB+screen dump overflows usbstack 2020-11-02 21:38:13 -05:00
sansafuzev2.h audio: Add support for 192 and 176KHz playback 2020-09-30 21:37:11 -04:00
sansam200v4.h audio: Add support for 192 and 176KHz playback 2020-09-30 21:37:11 -04:00
sansaview.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
sdlapp.h codecs: Add support for the 'VTX' ZX Spectrum chiptunes format. 2020-10-09 11:39:25 -04:00
shanlingq1.h New port: Shanling Q1 native 2021-07-13 22:01:33 +01:00
sim.h Get rid of USE_ROCKBOX_USB 2015-01-08 16:07:12 +01:00
sonynwa20.h sonynwz: Properly support multidrive, with hotswap of the SD card 2020-10-18 10:19:42 -04:00
sonynwza10.h sonynwz: Properly support multidrive, with hotswap of the SD card 2020-10-18 10:19:42 -04:00
sonynwza860.h Add support for the NWZ-A860 2017-09-17 00:03:02 +02:00
sonynwze350.h Add support for the NWZ-E350 2017-09-17 23:47:49 +02:00
sonynwze360.h imx233: Enable 96/192K playback for all imx233 targets that have room 2020-10-03 16:56:19 -04:00
sonynwze370.h imx233: Enable 96/192K playback for all imx233 targets that have room 2020-10-03 16:56:19 -04:00
sonynwze450.h Initial commit for the Sony NWZ linux port 2017-09-05 21:42:12 +02:00
sonynwze460.h Initial commit for the Sony NWZ linux port 2017-09-05 21:42:12 +02:00
sonynwze470.h Initial commit for the Sony NWZ linux port 2017-09-05 21:42:12 +02:00
sonynwze580.h Initial commit for the Sony NWZ linux port 2017-09-05 21:42:12 +02:00
sonynwzlinux.h alsa: instead of per-target tests, use HAVE_ALSA_32BIT 2021-04-08 23:02:15 -04:00
sonynwzs750.h Add support for the Sony NWZ-S750 2017-09-17 14:35:58 +02:00
tatungtpj1022.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
vibe500.h Disable 88/96KHz from targets that lack the IRAM to hold the mix buffers 2020-10-03 15:27:30 -04:00
xduoox3.h xduoox3: Work out clocks for 176/192KHz support. 2020-10-01 17:30:22 -04:00
xduoox3ii.h hosted: Consolidate common config of hiby-based units into a common header 2020-10-17 20:45:41 -04:00
xduoox20.h xduoox20: Remove a duplicate config option 2020-10-17 22:52:48 -04:00
zenvision.h Add a config file for zenvision (which includes zvm30gb config file) 2010-01-24 19:33:51 +00:00
zenvisionm30gb.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00
zenvisionm60gb.h [4/4] Remove HAVE_LCD_BITMAP, as it's now the only choice. 2020-07-24 21:20:13 +00:00