| .. |
|
config
|
Enable HID support, clean up usb-drv-as3525.c a bit, add a workaround for weird Linux behaviour (don't have Windows to test with), we don't need to set up USB_PHY_EPx_INFO (OF doesn't bother either).
|
2010-06-28 09:46:13 +00:00 |
|
adc.h
|
FS#10756 - Free unused init code
|
2010-03-03 23:20:32 +00:00 |
|
ak4537.h
|
|
|
|
akcodec.h
|
|
|
|
as3514.h
|
e200v1/c200v1: Implement limited samplerate switching. Rates 24kHz and below are being a bear as far as minor crackling at higher amplitude-- leave them out for the time being since no solution is currently evident. 48, 44, 32 (rec rates 24, 22, 16) seem perfectly fine. I'm betting c200 is ok to include because it uses the same setup as e200.
|
2010-06-26 10:07:17 +00:00 |
|
as3525.h
|
as3525*: enable MMU in bootloader
|
2010-06-18 17:33:51 +00:00 |
|
as3525v2.h
|
as3525v2-usb: define number of enpoints correctly, write interrupt handler
|
2010-06-23 22:03:31 +00:00 |
|
ascodec.h
|
|
|
|
at91sam9260.h
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
ata.h
|
Commit FS#9545, storage cleanup and multi-driver support
|
2009-07-17 22:28:49 +00:00 |
|
ata_idle_notify.h
|
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
|
2010-06-21 16:53:00 +00:00 |
|
ata_mmc.h
|
Merge tCardInfo struct (MMC) and tSDCardInfo struct (SD)
|
2009-07-01 10:07:22 +00:00 |
|
audio.h
|
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
|
2010-06-21 16:53:00 +00:00 |
|
audiohw.h
|
- Move uisimulator/sdl/*.[ch] into the target tree, under firmware/target/hosted/sdl, uisdl.c is split up across button-sdl.c and system-sdl.c.
|
2010-05-15 21:02:47 +00:00 |
|
backlight-sw-fading.h
|
|
|
|
backlight.h
|
FS#10756 - Free unused init code
|
2010-03-03 23:20:32 +00:00 |
|
bidi.h
|
|
|
|
bitswap.h
|
|
|
|
bootchart.h
|
Boot charting support.
|
2010-04-01 16:27:21 +00:00 |
|
buffer.h
|
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
|
2010-06-21 16:53:00 +00:00 |
|
button.h
|
FS#10756 - Free unused init code
|
2010-03-03 23:20:32 +00:00 |
|
config.h
|
Enable HID support, clean up usb-drv-as3525.c a bit, add a workaround for weird Linux behaviour (don't have Windows to test with), we don't need to set up USB_PHY_EPx_INFO (OF doesn't bother either).
|
2010-06-28 09:46:13 +00:00 |
|
config_caps.h
|
|
|
|
cpu.h
|
FS#10047 : Clipv2
|
2009-12-31 19:15:20 +00:00 |
|
debug.h
|
don't let logf() and DEBUGF() be empty statements
|
2010-05-18 18:32:21 +00:00 |
|
disk.h
|
Make disk_init() non-static again. I forgot to look at the bootloaders
|
2010-06-06 13:28:13 +00:00 |
|
dm320.h
|
M:Robe 500: Add support for DMA based LCD updates when in Portrait mode. TestFPS measures 190 FPS with the DMA updates vs. 58 FPS for the non-DMA updates.
|
2009-08-20 00:36:39 +00:00 |
|
ds2411.h
|
|
|
|
eeprom_24cxx.h
|
|
|
|
eeprom_settings.h
|
|
|
|
enc_base.h
|
|
|
|
events.h
|
FS#11263 - Radio Art support! %C and %Cl tags work in the radio screen and Base Skin when the radio is running.
|
2010-05-16 11:13:42 +00:00 |
|
fat.h
|
FS#11118: reduce the number of cached sector in FAT code because some are useless after a rewrite of LFN entries handling. Also makes LFN handling more robust.
|
2010-03-22 10:35:25 +00:00 |
|
filefuncs.h
|
Move strip_volume() to filefuncs.c and set properties.
|
2009-11-26 22:34:08 +00:00 |
|
fmradio.h
|
|
|
|
fmradio_i2c.h
|
mark some functions as init functions (discarded after init() has run)
|
2010-05-27 12:00:29 +00:00 |
|
font.h
|
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
|
2010-06-21 16:53:00 +00:00 |
|
gdb_api.h
|
|
|
|
general.h
|
Simplify mpegplayer a bit and use array-based lists rather than linked lists for stream management. Move a couple useful functions to handle pointer arrays from kernel.c into general.c; mpeglayer now makes use of them.
|
2010-05-17 12:34:05 +00:00 |
|
generic_i2c.h
|
Apply FS #11423 - Use udelay in AMS driver for FM radio I2C
|
2010-06-21 21:41:07 +00:00 |
|
hangul.h
|
|
|
|
hd66789r.h
|
|
|
|
hwcompat.h
|
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
|
2010-06-21 16:53:00 +00:00 |
|
i2c-coldfire.h
|
Fix more tabs
|
2010-01-03 10:27:43 +00:00 |
|
i2c-pp.h
|
|
|
|
i2c-s5l8700.h
|
S5L8700: implement i2c driver (used for communicating with the RTC and the codec in the meizus)
|
2009-06-27 20:11:11 +00:00 |
|
i2c.h
|
|
|
|
i2s.h
|
|
|
|
iap.h
|
Clean up IAP / ipod remote tuner a bit.
|
2010-04-18 15:46:56 +00:00 |
|
ifp_usb_serial.h
|
|
|
|
imx31l.h
|
Gigabeat S: Implement LCD contrast, invert and flip modes. Enhance LCD power management. Include init data but it's not needed yet (identical to Gigabeat F).
|
2010-05-18 23:50:00 +00:00 |
|
ipod_remote_tuner.h
|
Add support for the ipod FM remote to the 4G, Color, 5G, nano 1G with RDS
|
2009-12-01 17:54:40 +00:00 |
|
isp1362.h
|
|
|
|
isp1583.h
|
Correct svn:keywords and svn:eol-style on a few more files.
|
2009-07-12 09:43:44 +00:00 |
|
jz4740-codec.h
|
|
|
|
jz4740.h
|
Ingenic Jz4740: add basic frequency switching
|
2009-07-03 21:34:40 +00:00 |
|
jz_mxu.h
|
|
|
|
kernel.h
|
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
|
2010-06-21 16:53:00 +00:00 |
|
lcd-charcell.h
|
|
|
|
lcd-remote.h
|
Revise r23225 a bit, removing the debug_printf function and implementing more generic lcd_(remote)_putsf function(s) instead and use those in more places
|
2009-10-17 18:02:48 +00:00 |
|
lcd.h
|
FS#10756 - Free unused init code
|
2010-03-03 23:20:32 +00:00 |
|
led.h
|
|
|
|
logf.h
|
don't let logf() and DEBUGF() be empty statements
|
2010-05-18 18:32:21 +00:00 |
|
ltv350qv.h
|
|
|
|
lv24020lp.h
|
|
|
|
m5636.h
|
|
|
|
m66591.h
|
Correct svn:keywords and svn:eol-style on a few more files.
|
2009-07-12 09:43:44 +00:00 |
|
mas.h
|
Fix more tabs
|
2010-01-03 10:27:43 +00:00 |
|
mas35xx.h
|
|
|
|
mc13783.h
|
i.MX31/Gigabeat S: Actually enable DPTC which can set optimal voltage for 528MHz. Requires an SPI and PMIC interface rework because of the low-latency needs for the DPTC to work best with minimal panicing. SPI can work with multitasking and asynchronously from interrupt handlers or normal code.
|
2010-05-04 10:07:53 +00:00 |
|
mcf5249.h
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
mcf5250.h
|
|
|
|
mips-archdefs.h
|
|
|
|
mips.h
|
|
|
|
mipsregs.h
|
|
|
|
mmc.h
|
Commit FS#9545, storage cleanup and multi-driver support
|
2009-07-17 22:28:49 +00:00 |
|
mp3_playback.h
|
|
|
|
mv.h
|
Commit FS#9545, storage cleanup and multi-driver support
|
2009-07-17 22:28:49 +00:00 |
|
nand.h
|
Core changes to allow storage drivers to do cleanup on shutdown, and iPod Nano 2G shutdown code rework (FS#10668)
|
2009-10-09 20:36:09 +00:00 |
|
nand_id.h
|
Correct svn:keywords and svn:eol-style on a few more files.
|
2009-07-12 09:43:44 +00:00 |
|
ohci.h
|
Add data structures
|
2009-07-12 15:29:22 +00:00 |
|
panic.h
|
|
|
|
pcf5060x.h
|
D2: Use a common function for reading ADC values from the PMU
|
2009-10-08 15:47:43 +00:00 |
|
pcf5063x.h
|
Initial support for runtime detection of the PMU used in newer D2+ models (PCF50635). The backlight and battery monitoring should work, but the RTC and touchscreen are not yet implemented.
|
2009-10-10 17:35:02 +00:00 |
|
pcf50605.h
|
|
|
|
pcf50606.h
|
D2: Use a common function for reading ADC values from the PMU
|
2009-10-08 15:47:43 +00:00 |
|
pcf50635.h
|
Initial support for runtime detection of the PMU used in newer D2+ models (PCF50635). The backlight and battery monitoring should work, but the RTC and touchscreen are not yet implemented.
|
2009-10-10 17:35:02 +00:00 |
|
pcm.h
|
e200v1/c200v1: Implement limited samplerate switching. Rates 24kHz and below are being a bear as far as minor crackling at higher amplitude-- leave them out for the time being since no solution is currently evident. 48, 44, 32 (rec rates 24, 22, 16) seem perfectly fine. I'm betting c200 is ok to include because it uses the same setup as e200.
|
2010-06-26 10:07:17 +00:00 |
|
pcm_sampr.h
|
Should clear up rest of red. Add a required #define in the config for c200. Fix up some preprocessing directives. Hope it's all taken care of now.
|
2010-06-26 10:37:41 +00:00 |
|
pl081.h
|
|
|
|
pl180.h
|
AMS Sansa: Add voltage defines to pl180.h. No functional changes.
|
2009-10-19 05:34:17 +00:00 |
|
pnx0101.h
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
power.h
|
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
|
2010-06-21 16:53:00 +00:00 |
|
powermgmt.h
|
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
|
2010-06-21 16:53:00 +00:00 |
|
pp5002.h
|
Move CACHEALIGN_BITS to cpu headers
|
2010-04-13 15:50:08 +00:00 |
|
pp5020.h
|
Move CACHEALIGN_BITS to cpu headers
|
2010-04-13 15:50:08 +00:00 |
|
pp5024.h
|
|
|
|
pp6100.h
|
Add information gleaned from disassembling the main firmware image. Detect lcd type in use. Still no actual output
|
2009-07-17 20:40:40 +00:00 |
|
profile.h
|
|
|
|
qt1106.h
|
|
|
|
r61509.h
|
Onda VX7x7: fix error when compiling with USB_BOOT defined
|
2009-07-29 12:57:42 +00:00 |
|
ramdisk.h
|
Commit FS#9545, storage cleanup and multi-driver support
|
2009-07-17 22:28:49 +00:00 |
|
rda5802.h
|
The mystery FM chip in some Sansa Clip+ players has been identified as a RDA5802, so rename files and functions. Also fix several bugs.
|
2010-06-16 20:29:08 +00:00 |
|
rolo.h
|
|
|
|
rtc.h
|
rtc_enable_alarm() needs no return value
|
2010-05-22 00:28:26 +00:00 |
|
s1a0903x01.h
|
|
|
|
s3c2440.h
|
s5l870x : use mmu-arm.S
|
2010-04-13 15:59:49 +00:00 |
|
s5l8700.h
|
Move CACHEALIGN_BITS to cpu headers
|
2010-04-13 15:50:08 +00:00 |
|
screendump.h
|
|
|
|
scroll_engine.h
|
FS#10756 - Free unused init code
|
2010-03-03 23:20:32 +00:00 |
|
sd.h
|
Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix.
|
2010-06-06 13:20:47 +00:00 |
|
sdmmc.h
|
Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix.
|
2010-06-06 13:20:47 +00:00 |
|
serial.h
|
|
|
|
sh7034.h
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
si4700.h
|
Support for mystery FM chip in some Sansa Clip+, FS #11403 by me
|
2010-06-15 20:57:48 +00:00 |
|
sound.h
|
Gigabeat S: Fully enable access to hardware tone controls and 3-D effect feature. Under the hood, it's designated a hardware equalizer since it is one. Implement code framework for hardware EQ in general. Menu aspect is well abstracted and so the UI and strings can be changed around if taste doesn't quite suit. So far the emphasis is distinction of the UI labelling from the software EQ so that it's clear the settings are for a different thing.
|
2010-05-15 13:09:45 +00:00 |
|
spdif.h
|
|
|
|
spi.h
|
Correct svn:keywords and svn:eol-style on a few more files.
|
2009-07-12 09:43:44 +00:00 |
|
storage.h
|
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
|
2010-06-21 16:53:00 +00:00 |
|
structec.h
|
|
|
|
sw_i2c.h
|
|
|
|
synaptics-mep.h
|
Packard Bell Vibe 500: touchpad code rework. Improve touch sensivity a bit by setting the MEP parameters in the power_init() function. Implement new function in synaptics-mep driver (touchpad_set_parameter) necessary for it. Move the button lights code to the target backlight file.
|
2010-02-06 19:15:43 +00:00 |
|
system.h
|
Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout.
|
2010-06-30 02:02:46 +00:00 |
|
tcc77x.h
|
TCC: Implement ECC error correction for sectors read from NAND. Tested on D2 (78x, MLC) and M200 (77x, SLC).
|
2009-08-12 19:26:04 +00:00 |
|
tcc780x.h
|
D2: Enable ARM cache coherency functions (eg. during codec load), which should eliminate data aborts/freezes on track changes. NOTE: The linker script reserves space at the end of DRAM for the TTB, but this is not currently used.
|
2009-09-01 21:35:37 +00:00 |
|
tea5760.h
|
Meizu: implement i2c for the meizu fmradio and update the tea5760 tuner driver
|
2009-07-07 21:57:16 +00:00 |
|
tea5767.h
|
|
|
|
thread.h
|
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
|
2010-06-21 16:53:00 +00:00 |
|
timer.h
|
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
|
2010-06-21 16:53:00 +00:00 |
|
tlv320.h
|
|
|
|
touchscreen.h
|
Remove svn:executable from firmware
|
2009-10-31 02:26:40 +00:00 |
|
tsc200x.h
|
Touchscreen support for newer Cowon D2+ hardware revisions (using TSC200x touchscreen controller).
|
2009-10-15 20:13:29 +00:00 |
|
tsc2100.h
|
Correct svn:keywords and svn:eol-style on a few more files.
|
2009-07-12 09:43:44 +00:00 |
|
tuner.h
|
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
|
2010-06-21 16:53:00 +00:00 |
|
uda1341.h
|
Improvements to mini2440/UDA1341 audio
|
2009-11-01 22:58:08 +00:00 |
|
uda1380.h
|
Fix more tabs
|
2010-01-03 10:27:43 +00:00 |
|
udacodec.h
|
Create an udacodec interface (similar to ascodec and wmcoded) and adapt/implement it for the iriver h1xx/h3xx and the meizus.
|
2009-06-28 17:43:04 +00:00 |
|
usb-s3c6400x.h
|
iPod Nano 2G USB support based on the S3C6400X datasheet. Disabled by default for now.
|
2009-10-20 06:37:07 +00:00 |
|
usb-tcc.h
|
Fix more tabs
|
2010-01-03 10:27:43 +00:00 |
|
usb.h
|
New USB charging system, part 2 - "Force" charging mode
|
2010-06-05 20:43:30 +00:00 |
|
usb_ch9.h
|
Fix more tabs
|
2010-01-03 10:27:43 +00:00 |
|
usb_core.h
|
New USB charging system, part 1 - API rework and user-visible setting update
|
2010-06-05 10:05:27 +00:00 |
|
usb_drv.h
|
|
|
|
wm8731.h
|
|
|
|
wm8751.h
|
MRobe100, HD200, Gigabeat F/X (anything with wm8750 or wm8751). Properly prescale bass and treble controls to avoid clipping.
|
2010-05-11 04:02:45 +00:00 |
|
wm8758.h
|
Submit FS#11065. Introduce a new system setting for en-/disabling the Line-out. For now only implemented on iPod Video. This allows to save power if the user does not use the player's Line-out. On iPod 5G the saving is ~0.5 mA.
|
2010-03-20 15:02:29 +00:00 |
|
wm8975.h
|
|
|
|
wm8978.h
|
Gigabeat S: Fully enable access to hardware tone controls and 3-D effect feature. Under the hood, it's designated a hardware equalizer since it is one. Implement code framework for hardware EQ in general. Menu aspect is well abstracted and so the UI and strings can be changed around if taste doesn't quite suit. So far the emphasis is distinction of the UI labelling from the software EQ so that it's clear the settings are for a different thing.
|
2010-05-15 13:09:45 +00:00 |
|
wm8985.h
|
Submit FS#11240 by Raphael Jakse. Allows to reduce volume on WM8985 to -89 dB (e.g. used for Cowon D2). Below -57 dB the line out is affected. The manual is updated accordingly.
|
2010-05-30 18:29:04 +00:00 |
|
wmcodec.h
|
|
|
e286b0bbc0