| .. |
|
adc.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
as3514.h
|
Add register bit defines for as3514 and clean stuff up. Reduce poppiness at startup and shutdown (and even powerup for e200). Really, I can't honestly say it will help anything but an e200v1 but I'm sick of the noises. ;)
|
2008-11-25 16:16:06 +00:00 |
|
as3525.h
|
Sansa AMS: use vectored interrupts
|
2008-12-05 17:10:11 +00:00 |
|
ascodec.h
|
Oops, fix red - only include ascodec-target.h when HAVE_AS3514 is defined
|
2008-10-31 00:37:58 +00:00 |
|
ata.h
|
*_hard_reset() is only used inside ata.c, so there's no need to export it to the world
|
2008-11-04 19:37:28 +00:00 |
|
ata_idle_notify.h
|
Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*.
|
2008-11-01 16:14:28 +00:00 |
|
ata_mmc.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
audio.h
|
FS#9609 FM radio support for the Gigabeat S, seeking/scanning is not yet
|
2008-12-09 20:48:04 +00:00 |
|
audiohw.h
|
Have drivers merged for WM8711/21/31 since they are so similar but respect all register differences between codecs. Change minis to #define the actual codec type. If anything breaks check if OSCPD and CLKOUTPD need to be clear for the target- H10 is fine. A nice naming convention suggestion for WM codec multidrivers would be welcome rather than naming for a specific chip.
|
2008-12-08 21:09:56 +00:00 |
|
backlight-thread-fading.h
|
...and spell the property names correctly.
|
2008-11-26 08:28:54 +00:00 |
|
backlight.h
|
Add hardware backlight fading on Gigabeat S with fade up and down options in LCD Settings. USE_BACKLIGHT_CUSTOM_FADING_BOOL is used to specify the setting type needed but leave the fading code itself implementation-defined.
|
2008-11-26 21:26:22 +00:00 |
|
bidi.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
bitswap.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
buffer.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
button.h
|
Commit FS#9308: differentiate between TOUCHPAD & TOUCHSCREEN
|
2008-08-23 09:46:38 +00:00 |
|
config-c100.h
|
fix reds
|
2008-11-01 16:49:38 +00:00 |
|
config-c200.h
|
Fix reds. Also note my r19221 commit message had a typo - shoudld have been e200/c200, not e100.
|
2008-11-26 10:21:03 +00:00 |
|
config-clip.h
|
Sansa Clip: enable tagcache, quickscreen and pitchscreen
|
2008-12-10 13:00:01 +00:00 |
|
config-cowond2.h
|
Move tcc77x/usb-tcc77x.c to usb-tcc.c as it is more general than just tcc77x (even usb-tcc is too specific, but I don't know anything better)
|
2008-11-30 15:43:15 +00:00 |
|
config-creativezv.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-creativezvm.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-creativezvm60gb.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-e200.h
|
Fix reds. Also note my r19221 commit message had a typo - shoudld have been e200/c200, not e100.
|
2008-11-26 10:21:03 +00:00 |
|
config-e200v2.h
|
Sansa e200v2 and Fuze : disable not implemented recording
|
2008-12-11 14:16:05 +00:00 |
|
config-fmrecorder.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-fuze.h
|
Sansa e200v2 and Fuze : disable not implemented recording
|
2008-12-11 14:16:05 +00:00 |
|
config-gigabeat-s.h
|
Fix minor copy & paste error in comment. No functional change.
|
2008-12-10 13:42:20 +00:00 |
|
config-gigabeat.h
|
Meg F/X can beep and click using a hardware timer so let us try it out. To match things up better, fix PCM beeping to give correct frequency (and get a pointer wrap bug too). Do some minor adjustments to compensate for corrections.
|
2008-12-07 00:07:47 +00:00 |
|
config-h10.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-h10_5gb.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-h100.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-h120.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-h300.h
|
Straighten out some powermanagement stuff. Give target complete control over how power inputs are sensed. Clean SIMULATOR stuff out of target files. Get rid of USB charging option on targets that don't support it or don't implement it yet. Menu string remains to avoid language incompatibility but should be removed on next cleanup for targets not using it (notice in english.lang). global_settings becomes incompatible for some builds and so plugin API version is incremented.
|
2008-12-03 19:54:25 +00:00 |
|
config-hdd1630.h
|
FS#9591 by Anton Veretenenko for the Philips GoGear HDD1620/1630 (with a few changes by me). Fixes boot problem, pixel format, sound, and a few other things.
|
2008-12-12 04:56:25 +00:00 |
|
config-iaudio7.h
|
Replace USE_HIGH_SPEED with USB_NO_HIGH_SPEED, as high speed support is the normal case
|
2008-11-30 15:53:36 +00:00 |
|
config-iaudiom3.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-iaudiom5.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-iaudiox5.h
|
Fix reds. Also note my r19221 commit message had a typo - shoudld have been e200/c200, not e100.
|
2008-11-26 10:21:03 +00:00 |
|
config-ifp7xx.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-ipod1g2g.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-ipod3g.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-ipod4g.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-ipodcolor.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-ipodmini.h
|
Have drivers merged for WM8711/21/31 since they are so similar but respect all register differences between codecs. Change minis to #define the actual codec type. If anything breaks check if OSCPD and CLKOUTPD need to be clear for the target- H10 is fine. A nice naming convention suggestion for WM codec multidrivers would be welcome rather than naming for a specific chip.
|
2008-12-08 21:09:56 +00:00 |
|
config-ipodmini2g.h
|
Have drivers merged for WM8711/21/31 since they are so similar but respect all register differences between codecs. Change minis to #define the actual codec type. If anything breaks check if OSCPD and CLKOUTPD need to be clear for the target- H10 is fine. A nice naming convention suggestion for WM codec multidrivers would be welcome rather than naming for a specific chip.
|
2008-12-08 21:09:56 +00:00 |
|
config-ipodnano.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-ipodvideo.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-logikdax.h
|
Replace USE_HIGH_SPEED with USB_NO_HIGH_SPEED, as high speed support is the normal case
|
2008-11-30 15:53:36 +00:00 |
|
config-m200.h
|
fix reds
|
2008-11-01 16:49:38 +00:00 |
|
config-m200v4.h
|
Sansa AMS: PCM driver (FS#9592)
|
2008-12-04 22:27:48 +00:00 |
|
config-meizu-m3.h
|
Add new storage-related defines for meizu
|
2008-11-01 17:25:49 +00:00 |
|
config-meizu-m6sl.h
|
Add new storage-related defines for meizu
|
2008-11-01 17:25:49 +00:00 |
|
config-meizu-m6sp.h
|
Add new storage-related defines for meizu
|
2008-11-01 17:25:49 +00:00 |
|
config-mrobe100.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-mrobe500.h
|
New makefile solution: A single invocation of 'make' to build the entire tree. Fully controlled dependencies give faster and more correct recompiles.
|
2008-11-20 11:27:31 +00:00 |
|
config-ondavx747.h
|
Commit some USB and ATA rework/refactoring (+ USB GPIO detection).
|
2008-11-21 12:50:06 +00:00 |
|
config-ondavx767.h
|
Onda VX747:
|
2008-11-04 20:30:01 +00:00 |
|
config-ondiofm.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-ondiosp.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-player.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-recorder.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-recorderv2.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-sa9200.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-tpj1022.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config.h
|
Sansa AMS: use non-busy wakeup to signal end of DMA transfer
|
2008-11-26 16:02:00 +00:00 |
|
config_caps.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
cpu.h
|
Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h
|
2008-10-12 16:46:01 +00:00 |
|
debug.h
|
New makefile solution: A single invocation of 'make' to build the entire tree. Fully controlled dependencies give faster and more correct recompiles.
|
2008-11-20 11:27:31 +00:00 |
|
disk.h
|
Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*.
|
2008-11-01 16:14:28 +00:00 |
|
dm320.h
|
Fix yellow.
|
2008-12-04 15:19:49 +00:00 |
|
ds2411.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
eeprom_24cxx.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
eeprom_settings.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
enc_base.h
|
New recording setting to configure how mono recordings are made. Previously, this was always L+R, which was kinda silly if your signal was on L only. This setting allows for L, R or L+R. SWCODEC only for now, to be added for HWCODEC (although that will only be L and L+R probably)
|
2008-10-08 22:18:16 +00:00 |
|
events.h
|
Accept FS#9480 - centralise and organise the events in the apps/ layer.
|
2008-10-16 10:38:03 +00:00 |
|
fat.h
|
Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*.
|
2008-11-01 16:14:28 +00:00 |
|
fmradio.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
fmradio_i2c.h
|
Sansa Clip: implement the fmradio_i2c interface using generic_i2c
|
2008-12-08 19:32:05 +00:00 |
|
font.h
|
Added support for configurable rockbox directory. FS#9567 by Alex Bennee.
|
2008-11-24 22:16:07 +00:00 |
|
gdb_api.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
general.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
generic_i2c.h
|
Generic I2C: fix various problems with this (now) unused driver
|
2008-12-07 19:25:51 +00:00 |
|
hangul.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
hd66789r.h
|
Commit fs#9404 (iAudio 7 updates by vitja). Also fixes play/pause behaviour on D2.
|
2008-09-16 08:09:44 +00:00 |
|
hotswap.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
hwcompat.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2c-coldfire.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2c-pp.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2c.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2s.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
ifp_usb_serial.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
imx31l.h
|
Fix yellow.
|
2008-12-04 15:19:49 +00:00 |
|
isp1362.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
isp1583.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
jz4740.h
|
Ingenic targets:
|
2008-12-04 18:26:19 +00:00 |
|
kernel.h
|
Use cookies for thread identification instead of pointers directly which gives a buffer against wrongly identifying a thread when the slot is recycled (which has been nagging me for awhile). A slot gets 255 uses before it repeats. Everything gets incompatible so a full update is required.
|
2008-12-10 08:57:10 +00:00 |
|
lcd-charcell.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
lcd-remote.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
lcd.h
|
resize-on-load for bitmap files on 2bpp and color targets
|
2008-12-09 23:07:59 +00:00 |
|
led.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
logf.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
ltv350qv.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
lv24020lp.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
m5636.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mas.h
|
Moved pcm_record from firmware to apps. Cleaned up some. Now all code using struct mp3entry is in apps.
|
2008-10-14 11:12:20 +00:00 |
|
mas35xx.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mc13783.h
|
MC13783 PMIC: Make some defines more strictly correct-- interrupts, etc.
|
2008-11-19 06:22:09 +00:00 |
|
mcf5249.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mcf5250.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mips-archdefs.h
|
And set svn:eol-style ...
|
2008-07-14 15:19:29 +00:00 |
|
mips.h
|
And set svn:eol-style ...
|
2008-07-14 15:19:29 +00:00 |
|
mipsregs.h
|
Onda VX747:
|
2008-11-04 20:30:01 +00:00 |
|
mmc.h
|
Since *set_led_enabled() is actually an ata-specific feature, move it back to ata_* only
|
2008-11-04 19:57:36 +00:00 |
|
mp3_playback.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mv.h
|
Now also commit added files
|
2008-11-01 16:25:04 +00:00 |
|
nand.h
|
Since *set_led_enabled() is actually an ata-specific feature, move it back to ata_* only
|
2008-11-04 19:57:36 +00:00 |
|
nand_id.h
|
Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*.
|
2008-11-01 16:14:28 +00:00 |
|
panic.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pcf5060x.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pcf50605.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pcf50606.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pcm.h
|
Red build fix: Moved PCM #defines from pcm_record.h to pcm.h. Added necessary #includes to statusbar.c and s1a0903x01.c.
|
2008-10-14 11:43:32 +00:00 |
|
pcm_sampr.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pl081.h
|
Sansa AMS: Use DMA for SD transfers (read and write)
|
2008-11-25 13:38:32 +00:00 |
|
pl180.h
|
Fix the Sansa AMS SD driver
|
2008-11-16 22:26:50 +00:00 |
|
pnx0101.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
power.h
|
Straighten out some powermanagement stuff. Give target complete control over how power inputs are sensed. Clean SIMULATOR stuff out of target files. Get rid of USB charging option on targets that don't support it or don't implement it yet. Menu string remains to avoid language incompatibility but should be removed on next cleanup for targets not using it (notice in english.lang). global_settings becomes incompatible for some builds and so plugin API version is incremented.
|
2008-12-03 19:54:25 +00:00 |
|
powermgmt.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
pp5002.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pp5020.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pp5024.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
profile.h
|
Commit FS#9170 by Dave Hooper. Adds support for profiling on ARM, and fixes various issues with compiling profile builds. Also, note that profile_reader.pl syntax has changed.
|
2008-07-28 22:43:41 +00:00 |
|
qt1106.h
|
set svn properties
|
2008-09-17 18:50:34 +00:00 |
|
r61509.h
|
Fix the LCD bug!
|
2008-07-16 15:25:35 +00:00 |
|
ramdisk.h
|
Since *set_led_enabled() is actually an ata-specific feature, move it back to ata_* only
|
2008-11-04 19:57:36 +00:00 |
|
rolo.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
rtc.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
s1a0903x01.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
s3c2440.h
|
Meg-FX: s3c register definitions really should be unsigned. Switch from 'int' to 'unsigned long' like other targets.
|
2008-12-04 15:06:48 +00:00 |
|
s5l8700.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
scroll_engine.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
sd.h
|
sd.h : avoid namespace collision by prefixing defines with SD_
|
2008-11-09 23:40:21 +00:00 |
|
serial.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
sh7034.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
si4700.h
|
FS#9609 FM radio support for the Gigabeat S, seeking/scanning is not yet
|
2008-12-09 20:48:04 +00:00 |
|
sound.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
spdif.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
spi.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
storage.h
|
Since *set_led_enabled() is actually an ata-specific feature, move it back to ata_* only
|
2008-11-04 19:57:36 +00:00 |
|
structec.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
sw_i2c.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
system.h
|
Macros should be ALL CAPS, so rename (un)likely() to (UN)LIKELY()
|
2008-11-22 16:56:20 +00:00 |
|
tcc77x.h
|
Initial commit of iaudio 7 port by Vitja Makarov (FS#9245). Port is at quite an advanced stage, but is troubled by the lack of a reliable NAND driver (similar to the Cowon D2 port) and is not yet suitable for non-developers.
|
2008-09-06 17:50:59 +00:00 |
|
tcc780x.h
|
Add some missed bits + change MODE to TMODE
|
2008-09-22 19:27:21 +00:00 |
|
tea5767.h
|
code police : fix some multiply defined variables
|
2008-10-18 23:31:29 +00:00 |
|
thread.h
|
Use cookies for thread identification instead of pointers directly which gives a buffer against wrongly identifying a thread when the slot is recycled (which has been nagging me for awhile). A slot gets 255 uses before it repeats. Everything gets incompatible so a full update is required.
|
2008-12-10 08:57:10 +00:00 |
|
timer.h
|
Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h
|
2008-10-12 16:46:01 +00:00 |
|
tlv320.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
tsc2100.h
|
Minor missing #include and static function fixes for mrobe
|
2008-09-10 20:14:22 +00:00 |
|
tuner.h
|
Add more driver stubs to make the Fuze and e200v2 main builds compile; Correct the memory definition for the Fuze (8MB)
|
2008-11-11 14:46:13 +00:00 |
|
uda1380.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
usb-tcc.h
|
Move tcc77x/usb-tcc77x.c to usb-tcc.c as it is more general than just tcc77x (even usb-tcc is too specific, but I don't know anything better)
|
2008-11-30 15:43:15 +00:00 |
|
usb.h
|
Add more driver stubs to make the Fuze and e200v2 main builds compile; Correct the memory definition for the Fuze (8MB)
|
2008-11-11 14:46:13 +00:00 |
|
usb_ch9.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
usb_core.h
|
reorganise the USB stack a bit to allow for easier integration of non-ARC controller drivers
|
2008-10-03 22:43:16 +00:00 |
|
usb_drv.h
|
Remove usb_drv_wait from the public usb api, and remove the implementation from usb-drv-arc.c, as it is not actually used
|
2008-11-30 15:56:49 +00:00 |
|
wm8731.h
|
Have drivers merged for WM8711/21/31 since they are so similar but respect all register differences between codecs. Change minis to #define the actual codec type. If anything breaks check if OSCPD and CLKOUTPD need to be clear for the target- H10 is fine. A nice naming convention suggestion for WM codec multidrivers would be welcome rather than naming for a specific chip.
|
2008-12-08 21:09:56 +00:00 |
|
wm8751.h
|
cleanup some audio driver headers
|
2008-07-02 23:01:21 +00:00 |
|
wm8758.h
|
Remove the audiohw_set_nsorder() function since it is not used, only implemented on WM8731 and not wanted/used there.
|
2008-10-18 22:37:41 +00:00 |
|
wm8975.h
|
Remove the audiohw_set_nsorder() function since it is not used, only implemented on WM8731 and not wanted/used there.
|
2008-10-18 22:37:41 +00:00 |
|
wm8978.h
|
FS#9609 FM radio support for the Gigabeat S, seeking/scanning is not yet
|
2008-12-09 20:48:04 +00:00 |
|
wm8985.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
wmcodec.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
08585e417b