rockbox/firmware/export/config-recorder.h
Frank Gevaerts 46573019a5 add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18735 a1c6a512-1295-4272-9138-f99709370657
2008-10-07 19:37:33 +00:00

119 lines
3.2 KiB
C

/* define this if you use an ATA controller */
#define HAVE_ATA
#define MODEL_NAME "Archos Recorder"
/* define this if you have recording possibility */
#define HAVE_RECORDING
/* Define bitmask of input sources - recordable bitmask can be defined
explicitly if different */
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_SPDIF)
/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP
/* define this if you can flip your LCD */
#define HAVE_LCD_FLIP
/* define this if you can invert the colours on your LCD */
#define HAVE_LCD_INVERT
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you have access to the pitchscreen */
#define HAVE_PITCHSCREEN
/* define this if you have the button bar */
#define HAVE_BUTTONBAR
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
/* LCD dimensions */
#define LCD_WIDTH 112
#define LCD_HEIGHT 64
#define LCD_DEPTH 1
#define LCD_PIXELFORMAT VERTICAL_PACKING
/* define this if you have the Recorder's 10-key keyboard */
#define CONFIG_KEYPAD RECORDER_PAD
/* define this if you have a real-time clock */
#define CONFIG_RTC RTC_M41ST84W
/* define this if you have RTC RAM available for settings */
#define HAVE_RTC_RAM
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x8000
#define AB_REPEAT_ENABLE 1
/* Define this if you have a MAS3587F */
#define CONFIG_CODEC MAS3587F
/* define this if you have a disk storage, i.e. something
that needs spinups and can cause skips when shaked */
#define HAVE_DISK_STORAGE
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
#define CONFIG_I2C I2C_PLAYREC
#define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 50 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
/* define this if the unit should not shut down on low battery. */
#define NO_LOW_BATTERY_SHUTDOWN
/* Software controlled charging */
#define CONFIG_CHARGING CHARGING_CONTROL
#ifndef SIMULATOR
/* Define this if you have a SH7034 */
#define CONFIG_CPU SH7034
/* Define this if you have ATA power-off control */
#define HAVE_ATA_POWER_OFF
/* Define this to the CPU frequency */
#define CPU_FREQ 11059200
/* Offset ( in the firmware file's header ) to the file length */
#define FIRMWARE_OFFSET_FILE_LENGTH 0
/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC 4
/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 6
/* The start address index for ROM builds */
/* #define ROM_START 0x11010 for behind original Archos */
#define ROM_START 0x7010 /* for behind BootBox */
/* Software controlled LED */
#define CONFIG_LED LED_REAL
/* Define this for S/PDIF output available */
#define HAVE_SPDIF_OUT
#define CONFIG_LCD LCD_SSD1815
#define BOOTFILE_EXT "ajz"
#define BOOTFILE "ajbrec." BOOTFILE_EXT
#define BOOTDIR "/"
#endif /* SIMULATOR */
#define HAVE_LCD_CONTRAST
#define MIN_CONTRAST_SETTING 5
#define MAX_CONTRAST_SETTING 63