Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/export
History
Dave Chapman 08c41d42bb Add e200v2 and m200v2 targets. Move the telechips lcd-ssd1815.c (currently used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18836 a1c6a512-1295-4272-9138-f99709370657
2008-10-19 14:11:01 +00:00
..
adc.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
as3514.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
as3525.h The GPIO registers are 8-bit, so define them as such. 2008-10-19 12:47:58 +00:00
ata.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
ata_idle_notify.h Bootloaders don't need idle callbacks. 2008-09-23 22:12:21 +00:00
ata_mmc.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
audio.h Moved pcm_record from firmware to apps. Cleaned up some. Now all code using struct mp3entry is in apps. 2008-10-14 11:12:20 +00:00
audiohw.h Use shorter fields in sound_settings_info struct to save some bytes 2008-08-11 13:01:01 +00:00
backlight.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
bidi.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
bitswap.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
buffer.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
button.h Commit FS#9308: differentiate between TOUCHPAD & TOUCHSCREEN 2008-08-23 09:46:38 +00:00
config-c100.h WPS editor: 2008-09-04 14:49:53 +00:00
config-c200.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-clip.h Add e200v2 and m200v2 targets. Move the telechips lcd-ssd1815.c (currently used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip. 2008-10-19 14:11:01 +00:00
config-cowond2.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-creativezv.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-creativezvm.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-creativezvm60gb.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-e200.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-e200v2.h Add e200v2 and m200v2 targets. Move the telechips lcd-ssd1815.c (currently used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip. 2008-10-19 14:11:01 +00:00
config-fmrecorder.h add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...) 2008-10-07 19:37:33 +00:00
config-gigabeat-s.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-gigabeat.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-h10.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-h10_5gb.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-h100.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-h120.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-h300.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-hdd1630.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-iaudio7.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-iaudiom3.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-iaudiom5.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-iaudiox5.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-ifp7xx.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-ipod1g2g.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-ipod3g.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-ipod4g.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-ipodcolor.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-ipodmini.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-ipodmini2g.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-ipodnano.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-ipodvideo.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-logikdax.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-m200.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-m200v2.h Add e200v2 and m200v2 targets. Move the telechips lcd-ssd1815.c (currently used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip. 2008-10-19 14:11:01 +00:00
config-meizu-m3.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-meizu-m6sl.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-meizu-m6sp.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-mrobe100.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-mrobe500.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-ondavx747.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-ondavx767.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-ondiofm.h WPS editor: 2008-09-04 14:49:53 +00:00
config-ondiosp.h WPS editor: 2008-09-04 14:49:53 +00:00
config-player.h Merge the necessary changes for the new archos firmware flash images back to the trunk, including the related optimisations. 2008-10-16 16:42:37 +00:00
config-recorder.h add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...) 2008-10-07 19:37:33 +00:00
config-recorderv2.h add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...) 2008-10-07 19:37:33 +00:00
config-sa9200.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config-tpj1022.h Codec memory reorganization 2008-10-19 12:35:53 +00:00
config.h Add e200v2 and m200v2 targets. Move the telechips lcd-ssd1815.c (currently used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip. 2008-10-19 14:11:01 +00:00
config_caps.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
cpu.h Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h 2008-10-12 16:46:01 +00:00
debug.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
disk.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
dm320.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
ds2411.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
eeprom_24cxx.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
eeprom_settings.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
enc_base.h New recording setting to configure how mono recordings are made. Previously, this was always L+R, which was kinda silly if your signal was on L only. This setting allows for L, R or L+R. SWCODEC only for now, to be added for HWCODEC (although that will only be L and L+R probably) 2008-10-08 22:18:16 +00:00
events.h Accept FS#9480 - centralise and organise the events in the apps/ layer. 2008-10-16 10:38:03 +00:00
fat.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
fmradio.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
fmradio_i2c.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
font.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
gdb_api.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
general.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
generic_i2c.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
hangul.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
hd66789r.h Commit fs#9404 (iAudio 7 updates by vitja). Also fixes play/pause behaviour on D2. 2008-09-16 08:09:44 +00:00
hotswap.h Simplify & fix the MMC driver. After more than 3 years I found that the MMC specs were a bit misleading, and the 'large' MMC which state a block size of 1024 or 2048 bytes and no partial read and/or partial write capability are happily accepting a block size of 512 bytes. So go KISS and remove all the variable/partial block handling code. This fixes the driver for the Transcend 4GB MMCplus, which doesn't cope when we actually set the 2048 byte block size it states. It also makes write operations involving small blocks faster and more reliable. * Note: The 4GB Transcend still doesn't work when plugged at boot, but works when hotplugged. 2008-09-14 20:33:24 +00:00
hwcompat.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
i2c-coldfire.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
i2c-pp.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
i2c.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
i2s.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
ifp_usb_serial.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
imx31l.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
isp1362.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
isp1583.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
jz4740.h Fix TABs and get rid of HAVE_BUTTON_HOLD 2008-10-07 20:23:56 +00:00
kernel.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
lcd-charcell.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
lcd-remote.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
lcd.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
led.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
logf.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
ltv350qv.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
lv24020lp.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
m5636.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
mas.h Moved pcm_record from firmware to apps. Cleaned up some. Now all code using struct mp3entry is in apps. 2008-10-14 11:12:20 +00:00
mas35xx.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
mc13783.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
mcf5249.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
mcf5250.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
mips-archdefs.h And set svn:eol-style ... 2008-07-14 15:19:29 +00:00
mips.h And set svn:eol-style ... 2008-07-14 15:19:29 +00:00
mipsregs.h Onda VX747: 2008-08-26 21:48:49 +00:00
mp3_playback.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
nand_id.h Onda VX747: 2008-07-15 17:17:01 +00:00
panic.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
pcf5060x.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
pcf50605.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
pcf50606.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
pcm.h Red build fix: Moved PCM #defines from pcm_record.h to pcm.h. Added necessary #includes to statusbar.c and s1a0903x01.c. 2008-10-14 11:43:32 +00:00
pcm_sampr.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
pnx0101.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
power.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
powermgmt.h Add rough estimate for iPod 4G power consumption. Probably a little off, but better then using the Archos numbers. 2008-08-21 20:01:32 +00:00
pp5002.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
pp5020.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
pp5024.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
profile.h Commit FS#9170 by Dave Hooper. Adds support for profiling on ARM, and fixes various issues with compiling profile builds. Also, note that profile_reader.pl syntax has changed. 2008-07-28 22:43:41 +00:00
qt1106.h set svn properties 2008-09-17 18:50:34 +00:00
r61509.h Fix the LCD bug! 2008-07-16 15:25:35 +00:00
rolo.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
rtc.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
s1a0903x01.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
s3c2440.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
s5l8700.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
scroll_engine.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
serial.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
sh7034.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
sound.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
spdif.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
spi.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
structec.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
sw_i2c.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
system.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
tcc77x.h Initial commit of iaudio 7 port by Vitja Makarov (FS#9245). Port is at quite an advanced stage, but is troubled by the lack of a reliable NAND driver (similar to the Cowon D2 port) and is not yet suitable for non-developers. 2008-09-06 17:50:59 +00:00
tcc780x.h Add some missed bits + change MODE to TMODE 2008-09-22 19:27:21 +00:00
tea5767.h code police : fix some multiply defined variables 2008-10-18 23:31:29 +00:00
thread.h Onda VX747: 2008-09-14 16:26:08 +00:00
timer.h Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h 2008-10-12 16:46:01 +00:00
tlv320.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
tsc2100.h Minor missing #include and static function fixes for mrobe 2008-09-10 20:14:22 +00:00
tuner.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
uda1380.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
usb-tcc7xx.h Prepare for usb-telechips testing 2008-09-22 18:49:37 +00:00
usb.h reorganise the USB stack a bit to allow for easier integration of non-ARC controller drivers 2008-10-03 22:43:16 +00:00
usb_ch9.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
usb_core.h reorganise the USB stack a bit to allow for easier integration of non-ARC controller drivers 2008-10-03 22:43:16 +00:00
usb_drv.h reorganise the USB stack a bit to allow for easier integration of non-ARC controller drivers 2008-10-03 22:43:16 +00:00
wm8721.h Remove the audiohw_set_nsorder() function since it is not used, only implemented on WM8731 and not wanted/used there. 2008-10-18 22:37:41 +00:00
wm8731.h Remove the audiohw_set_nsorder() function since it is not used, only implemented on WM8731 and not wanted/used there. 2008-10-18 22:37:41 +00:00
wm8751.h cleanup some audio driver headers 2008-07-02 23:01:21 +00:00
wm8758.h Remove the audiohw_set_nsorder() function since it is not used, only implemented on WM8731 and not wanted/used there. 2008-10-18 22:37:41 +00:00
wm8975.h Remove the audiohw_set_nsorder() function since it is not used, only implemented on WM8731 and not wanted/used there. 2008-10-18 22:37:41 +00:00
wm8978.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
wm8985.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
wmcodec.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00