..
audio
Fix wrongly nested commenting
2010-06-05 21:09:11 +00:00
rtc
AMSv2 RTC: no need to write to RTC_WAKEUP register
2010-06-17 05:28:38 +00:00
tuner
The mystery FM chip in some Sansa Clip+ players has been identified as a RDA5802, so rename files and functions. Also fix several bugs.
2010-06-16 20:29:08 +00:00
ata.c
ata: do some threading-related corrections (some sync related where it matters). Make sure 'sleeping' is 'false' before the powerup sequence (throws-off powermgmt and it *is* about to woken again and powermgmt will need to compensate). Avoid looking at mutex flag directly; there's no tangible benefit I can discern and changes to the kernel that alter the meaning shouldn't be able to break anything. For that, in the jz sd driver, have sd_disk_is_active just return 'false' like all the other SD drivers do. If it *must* return this, it should implement it's own method but it seems to not matter.
2010-05-21 15:33:31 +00:00
ata_flash.c
Commit FS#9545, storage cleanup and multi-driver support
2009-07-17 22:28:49 +00:00
ata_mmc.c
Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix.
2010-06-06 13:20:47 +00:00
button.c
Commit FS#10887 by me. Change the check for software poweroff to be that the power button is held, not that the power button is held AND that no other button is held. This makes shutting down players with small tightly spaced buttons (Sandisk...) much easier. This also means that combos involving the power button can now potientially power off the player. The H10 and sansas excluding the Fuze use a combo involving power for AB repeat mode. However, the timeout for shutdown is much longer then the long press duration needed for AB repeat, and in practice seems to not be a problem on these players. I've tested this on various players for a long time and bugged other people to try it out, so I think its pretty safe, but if theres problems it can be reverted or keymaps tweaked.
2010-05-29 21:54:14 +00:00
dac.c
dac.h
Final removal of tabs in firmware path
2010-01-03 11:31:14 +00:00
eeprom_24cxx.c
Various files: make function implementations consistent with their declaration in the header file or static if
2009-01-31 23:51:11 +00:00
fat.c
Add IO priority handling. Currently all IO has equal priority, except the dircache scanning thread which is lower. This fixes the slow boot problem for me, with the added benefit that actual audio playback also starts faster.
2010-04-03 22:02:09 +00:00
fmradio.c
generic_i2c.c
Fix delays in generic i2c driver, reduce delays in ams sansa fmradio i2c driver (tested on m200v4, clip, e200v2, fuze).
2009-06-20 21:45:04 +00:00
i2c.c
Add missing mutex_init to i2c driver
2009-07-10 17:46:35 +00:00
isp1362.c
isp1583.c
FS#10226 - isp1583.c code cosmetics
2009-10-01 05:40:20 +00:00
lcd-1bit-vert.c
Rename sdl lcd initialization to (remote_)lcd_init_device which enables removing two #ifdef SIMULATOR and makes it happen as on target.
2010-05-18 12:27:20 +00:00
lcd-2bit-horz.c
Comment out lcd_drawline() DEBUGF messages which show in various simulators
2010-02-20 06:42:45 +00:00
lcd-2bit-vert.c
Comment out lcd_drawline() DEBUGF messages which show in various simulators
2010-02-20 06:42:45 +00:00
lcd-2bit-vi.c
Rename sdl lcd initialization to (remote_)lcd_init_device which enables removing two #ifdef SIMULATOR and makes it happen as on target.
2010-05-18 12:27:20 +00:00
lcd-16bit-vert.c
Comment out lcd_drawline() DEBUGF messages which show in various simulators
2010-02-20 06:42:45 +00:00
lcd-16bit.c
Comment out lcd_drawline() DEBUGF messages which show in various simulators
2010-02-20 06:42:45 +00:00
lcd-bitmap-common.c
avoid overflow in puts_scroll().
2010-05-21 13:30:21 +00:00
lcd-charcell.c
avoid overflow in puts_scroll().
2010-05-21 13:30:21 +00:00
lcd-charset-player.c
Final removal of tabs in firmware path
2010-01-03 11:31:14 +00:00
lcd-remote-1bit-v.c
lcd-remote-2bit-vi.c
led.c
m5636.c
m66591.c
M66591 Driver: Correct some comments.
2010-03-17 01:43:15 +00:00
mas.c
nand_id.c
TCC NAND: The BLOCKS_PER_SEGMENT define was actually the number of planes mentioned in the Samsung NAND datasheet. Add this to the nand_id struct, so that it can be runtime detected (required for some D2s to boot). Use the struct directly instead of making a local copy, and format the nand_info table to 80 columns.
2009-03-02 23:36:12 +00:00
pcf50605.c
pcf50606.c
D2: Reduce binsize a bit by using arrays for the PMU initialisation.
2009-10-11 21:12:06 +00:00
pcf50635.c
D2: Reduce binsize a bit by using arrays for the PMU initialisation.
2009-10-11 21:12:06 +00:00
qt1106.c
ramdisk.c
Commit FS#9545, storage cleanup and multi-driver support
2009-07-17 22:28:49 +00:00
sd.c
remane hotswap.* to sdmmc.*. The contents have nothing at all to do with hotswapping things
2010-06-05 21:12:16 +00:00
serial.c
Simplify some boolean expressions that compare directly against 'true'
2010-01-02 16:03:30 +00:00
sw_i2c.c
synaptics-mep.c
Packard Bell Vibe 500: touchpad code rework. Improve touch sensivity a bit by setting the MEP parameters in the power_init() function. Implement new function in synaptics-mep driver (touchpad_set_parameter) necessary for it. Move the button lights code to the target backlight file.
2010-02-06 19:15:43 +00:00
touchscreen.c
Remove svn:executable from firmware
2009-10-31 02:26:40 +00:00
tsc200x.c
Touchscreen support for newer Cowon D2+ hardware revisions (using TSC200x touchscreen controller).
2009-10-15 20:13:29 +00:00
tsc2100.c
M:Robe 500: Fix FIQ's and make the audio DMA a FIQ, simplify the ADC code and make it more reliable. Fix ADC problems on initial boot.
2009-12-12 18:36:52 +00:00
ba07b2055c