rockbox/firmware/target/arm
Michael Sparmann 06c1757138 iPod Classic: Fix YUV blitting. Mpegplayer works now.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29460 a1c6a512-1295-4272-9138-f99709370657
2011-02-28 11:54:28 +00:00
..
archos/av300 Rework ATA driver to get rid of lots of target-specific constants and allow for non-memory-mapped task file registers. 2011-01-02 22:51:47 +00:00
as3525 Return valid tuner ID even when tuner is not detected properly. Fixes FS#11791 2011-02-22 13:58:06 +00:00
at91sam
imx31 Gigabeat S: Smoother bootup. Don't do full drive reset at boot since it's not really a coldstart. Seems to work alright in both the bootloader and firmware. 2011-02-23 00:34:56 +00:00
ipod iPod Nano2g/Classic clickwheel: Configure GPIO pins as Hi-Z while hold switch is engaged 2011-02-10 19:13:30 +00:00
iriver Convert PortalPlayer iRivers to use USB-mode enabled bootloader. The H10 5/6GB already has a pre-boot USB mode (so it's a little redundant there) but building them the same way is simpler. 2011-01-17 06:50:27 +00:00
olympus */app.lds: remove STUBOFFSET 2010-09-20 17:09:55 +00:00
pbell Get the last warning for vibe 500 bootloader. 2011-01-15 09:11:38 +00:00
philips e200v1 seems to be ok using USB-enabled bootloader. Also, include the bootloader USB .lds into the boot.lds instead of pasting into every one to keep things sane for now-- commented upon inside. 2011-01-16 01:40:15 +00:00
pnx0101 move dbg_ports() from apps/menu_debug.c to target tree. FS#11712 by me. 2010-11-06 14:24:25 +00:00
s3c2440 Rework ATA driver to get rid of lots of target-specific constants and allow for non-memory-mapped task file registers. 2011-01-02 22:51:47 +00:00
s5l8700 iPod Classic CE-ATA Support (Part 4 of 4: S5L8702 ATA driver) 2011-02-27 22:47:55 +00:00
s5l8702 iPod Classic: Fix YUV blitting. Mpegplayer works now. 2011-02-28 11:54:28 +00:00
samsung */app.lds: remove STUBOFFSET 2010-09-20 17:09:55 +00:00
sandisk Submit FS#11926, calibrate charge curve for e200v1. Thanks to Martin Ritter. 2011-02-11 15:58:39 +00:00
tatung */app.lds: remove STUBOFFSET 2010-09-20 17:09:55 +00:00
tcc77x Clean up multiple definitions of RAM size. Remove -DMEM (make) and MEM (code), use the already defined MEMORYSIZE instead. 2011-02-02 17:43:32 +00:00
tcc780x Try to get some control over #ifdef hell in usb.c by refactoring and inline function use. SYS_USB_DISCONNECTED_ACK hasn't been doing anything useful for the USB thread; remove it. USB thread simply ignores that value. Observe only valid usb_state transitions. 2011-01-18 14:10:06 +00:00
tms320dm320 M:Robe 500: Use bit modifiers more. 2011-02-08 05:53:30 +00:00
adc-as3514.c
adc-pp5020.c
ascodec-pp.c
ascodec-target.h
ata-as-arm.S
ata-nand-telechips.c
ata-pp5002.c
ata-pp5020.c Fix or at least significantly improve FS#11830. With introduction of ATA DMA for PP502x a special treatment of the IDE0_CFG register for the iPod nano (see FS#7510) was lost. 2011-01-21 23:32:57 +00:00
ata-sd-pp.c All kernel objects in code shared amongs targets (core, plugins, codecs) should be declared SHAREDBSS_ATTR as any core could potentially touch them even though they seem only to involve threads on one core. The exception is target code for particular CPUs where proper allocation is fixed. playlist.c was a little odd too-- use one mutex for the current playlist and a separate one for created playlists (still pondering the necessity of more than one). 2011-02-14 11:27:45 +00:00
ata-target.h Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly). 2011-01-15 08:19:30 +00:00
audio-pp.c
bits-armv4.S Add ARMv4 16-bit(set, mod, clr) operations used on DM320. 2011-02-06 19:43:45 +00:00
bits-armv6.S
boot-pp502x-bl-usb.lds e200v1 seems to be ok using USB-enabled bootloader. Also, include the bootloader USB .lds into the boot.lds instead of pasting into every one to keep things sane for now-- commented upon inside. 2011-01-16 01:40:15 +00:00
crt0-pp-bl.S HDD6330: fix loading of the OF through the Rockbox bootloader (correct magic values in registers at the start), fix bootloader warnings. 2010-10-21 21:16:00 +00:00
crt0-pp.S Clean up multiple definitions of RAM size. Remove -DMEM (make) and MEM (code), use the already defined MEMORYSIZE instead. 2011-02-02 17:43:32 +00:00
crt0-pp502x-bl-usb.S Clean up multiple definitions of RAM size. Remove -DMEM (make) and MEM (code), use the already defined MEMORYSIZE instead. 2011-02-02 17:43:32 +00:00
crt0.S
debug-pp.c move dbg_ports() from apps/menu_debug.c to target tree. FS#11712 by me. 2010-11-06 14:24:25 +00:00
debug-target.h move dbg_ports() from apps/menu_debug.c to target tree. FS#11712 by me. 2010-11-06 14:24:25 +00:00
ffs-arm.S
i2c-pp.c
i2c-telechips.c
i2s-pp.c
kernel-pp.c Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly). 2011-01-15 08:19:30 +00:00
lcd-as-memframe.S
lcd-c200_c200v2.c
lcd-ssd1815.c
memcpy-arm.S
memmove-arm.S
memset-arm.S
memset16-arm.S
mmu-arm.h Rename cache coherency functions. 2010-09-08 17:05:49 +00:00
mmu-arm.S New port: iPod Classic (also known as iPod 6G/6.5G/7G) 2011-01-02 23:16:27 +00:00
mmu-armv6.S Fix beast, forgot the asm label when renaming. 2010-09-09 17:00:50 +00:00
pcm-pp.c
pcm-telechips.c
powermgmt-ascodec.c
sd-pp-target.h
support-arm.S
system-arm.c
system-arm.h Byteswap routines don't really need 'asm volatile', just 'asm' since it should be safe to move them for optimizing. Clean up the line endings for ARM. 2011-02-25 00:46:39 +00:00
system-pp502x.c Add a higher level USB detection that prevents fraudulent bus resets from causing USB mode to be entered. Enable for SA9200 only at this time. Also, for SA9200, use the bus power GPIO rather than the 'connector inserted' GPIO to detect the cable. 2011-01-17 12:24:41 +00:00
system-pp5002.c Rename cache coherency functions. 2010-09-08 17:05:49 +00:00
system-target.h Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly). 2011-01-15 08:19:30 +00:00
thread-arm.c New port: iPod Classic (also known as iPod 6G/6.5G/7G) 2011-01-02 23:16:27 +00:00
thread-pp.c Clean up multiple definitions of RAM size. Remove -DMEM (make) and MEM (code), use the already defined MEMORYSIZE instead. 2011-02-02 17:43:32 +00:00
timer-pp.c
usb-drv-arc.c Add a higher level USB detection that prevents fraudulent bus resets from causing USB mode to be entered. Enable for SA9200 only at this time. Also, for SA9200, use the bus power GPIO rather than the 'connector inserted' GPIO to detect the cable. 2011-01-17 12:24:41 +00:00
usb-fw-pp502x.c PP502x USB: It seems r29087 introduced additional parasitic current consumption after USB disconnect. So, reinitialize the controller just like at startup when disabling USB, which also happens to fix FS#10719. 2011-01-20 06:41:05 +00:00
usb-fw-pp5002.c Fix r29053 red and a leftover use of 'usb' variable as a bool rather than int in main-pp.c. 2011-01-15 08:52:59 +00:00
usb-s3c6400x.c Fix yellow, already assign values for various S5L8702 defines 2010-12-12 00:59:59 +00:00
usb-target.h Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly). 2011-01-15 08:19:30 +00:00
usb-tcc.c
wmcodec-pp.c
wmcodec-telechips.c