Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm/as3525/usb-drv-as3525v2.c
Amaury Pouly 04ae1db331 as3525v2-usb: end of massive renaming 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26972 a1c6a512-1295-4272-9138-f99709370657
2010-06-19 20:40:07 +00:00

640 lines
17 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright © 2010 Amaury Pouly
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "usb.h"
#include "usb_drv.h"
#include "as3525v2.h"
#include "clock-target.h"
#include "ascodec.h"
#include "as3514.h"
#include "stdbool.h"
#include "string.h"
#include "stdio.h"
#include "panic.h"
#include "mmu-arm.h"
#include "system.h"
#define LOGF_ENABLE
#include "logf.h"
#include "usb-drv-as3525v2.h"
#include "usb_core.h"
static int __in_ep_list[NUM_IN_EP] = {IN_EP_LIST};
static int __out_ep_list[NUM_OUT_EP] = {OUT_EP_LIST};
/* iterate through each in/out ep except EP0
* 'counter' is the counter, 'ep' is the actual value */
#define FOR_EACH_IN_EP(counter, ep) \
for(counter = 0, ep = __in_ep_list[0]; counter < NUM_IN_EP; counter++, ep = __in_ep_list[counter])
#define FOR_EACH_OUT_EP(counter, ep) \
for(counter = 0, ep = __out_ep_list[0]; counter < NUM_OUT_EP; counter++, ep = __out_ep_list[counter])
struct usb_endpoint
{
void *buf;
unsigned int len;
union
{
unsigned int sent;
unsigned int received;
};
bool wait;
bool busy;
};
#if 0
static struct usb_endpoint endpoints[USB_NUM_ENDPOINTS*2];
#endif
static struct usb_ctrlrequest ep0_setup_pkt;
void usb_attach(void)
{
logf("usb: attach");
usb_enable(true);
}
static void usb_delay(void)
{
int i = 0;
while(i < 0x300)
{
asm volatile("nop");
i++;
}
}
static void as3525v2_connect(void)
{
logf("usb: init as3525v2");
/* 1) enable usb core clock */
CGU_PERI |= CGU_USB_CLOCK_ENABLE;
usb_delay();
/* 2) enable usb phy clock */
CGU_USB |= 0x20;
usb_delay();
/* 3) clear "stop pclk" */
PCGCCTL &= ~0x1;
usb_delay();
/* 4) clear "power clamp" */
PCGCCTL &= ~0x4;
usb_delay();
/* 5) clear "reset power down module" */
PCGCCTL &= ~0x8;
usb_delay();
/* 6) set "power on program done" */
DCTL |= DCTL_pwronprgdone;
usb_delay();
/* 7) core soft reset */
GRSTCTL |= GRSTCTL_csftrst;
usb_delay();
/* 8) hclk soft reset */
GRSTCTL |= GRSTCTL_hsftrst;
usb_delay();
/* 9) flush and reset everything */
GRSTCTL |= 0x3f;
usb_delay();
/* 10) force device mode*/
GUSBCFG &= ~GUSBCFG_force_host_mode;
GUSBCFG |= GUSBCFG_force_device_mode;
usb_delay();
/* 11) Do something that is probably CCU related but undocumented*/
CCU_USB_THINGY &= ~0x1000;
usb_delay();
CCU_USB_THINGY &= ~0x300000;
usb_delay();
/* 12) reset usb core parameters (dev addr, speed, ...) */
DCFG = 0;
usb_delay();
}
static void enable_device_interrupts(void)
{
/* Clear any pending interrupt */
GINTSTS = 0xffffffff;
/* Clear any pending otg interrupt */
GOTGINT = 0xffffffff;
/* Enable interrupts */
GINTMSK = GINTMSK_usbreset
| GINTMSK_enumdone
| GINTMSK_inepintr
| GINTMSK_outepintr
| GINTMSK_otgintr
| GINTMSK_disconnect;
}
static void flush_tx_fifos(int nums)
{
unsigned int i = 0;
GRSTCTL = (GRSTCTL & ~bitm(GRSTCTL, txfnum))
| (nums << GRSTCTL_txfnum_bitp)
| GRSTCTL_txfflsh_flush;
while(GRSTCTL & GRSTCTL_txfflsh_flush && i < 0x300)
i++;
if(GRSTCTL & GRSTCTL_txfflsh_flush)
panicf("usb: hang of flush tx fifos (%x)", nums);
/* wait 3 phy clocks */
udelay(1);
}
static void flush_rx_fifo(void)
{
unsigned int i = 0;
GRSTCTL = GRSTCTL_rxfflsh_flush;
while(GRSTCTL & GRSTCTL_rxfflsh_flush && i < 0x300)
i++;
if(GRSTCTL & GRSTCTL_rxfflsh_flush)
panicf("usb: hang of flush rx fifo");
/* wait 3 phy clocks */
udelay(1);
}
static void core_reset(void)
{
unsigned int i = 0;
/* Wait for AHB master IDLE state. */
while((GRSTCTL & GRSTCTL_ahbidle) == 0)
udelay(10);
/* Core Soft Reset */
GRSTCTL |= GRSTCTL_csftrst;
/* Waits for the hardware to clear reset bit */
while(GRSTCTL & GRSTCTL_csftrst && i < 0x300)
i++;
if(GRSTCTL & GRSTCTL_csftrst)
panicf("oops, usb core soft reset hang :(");
/* Wait for 3 PHY Clocks */
udelay(1);
}
static void reset_endpoints(void)
{
int i, ep;
/* disable all endpoints except EP0 */
FOR_EACH_IN_EP(i, ep)
if(DIEPCTL(ep) & DEPCTL_epena)
DIEPCTL(ep) = DEPCTL_epdis | DEPCTL_snak;
else
DIEPCTL(ep) = 0;
FOR_EACH_OUT_EP(i, ep)
if(DOEPCTL(ep) & DEPCTL_epena)
DOEPCTL(ep) = DEPCTL_epdis | DEPCTL_snak;
else
DOEPCTL(ep) = 0;
/* Setup EP0 OUT with the following parameters:
* packet count = 1
* setup packet count = 1
* transfer size = 64
* Setup EP0 IN/OUT with 64 byte maximum packet size and activate both. Enable transfer on EP0 OUT
*/
DOEPTSIZ(0) = (1 << DEPTSIZ0_supcnt_bitp)
| (1 << DEPTSIZ0_pkcnt_bitp)
| 8;
/* setup DMA */
clean_dcache_range((void*)&ep0_setup_pkt, sizeof ep0_setup_pkt); /* force write back */
DOEPDMA(0) = (unsigned long)&ep0_setup_pkt; /* virtual address=physical address */
/* Enable endpoint, clear nak */
DOEPCTL(0) = DEPCTL_epena | DEPCTL_cnak | DEPCTL_usbactep
| (DEPCTL_MPS_8 << DEPCTL_mps_bitp);
/* 64 bytes packet size, active endpoint */
DIEPCTL(0) = (DEPCTL_MPS_8 << DEPCTL_mps_bitp)
| DEPCTL_usbactep;
DCTL = DCTL_cgnpinnak | DCTL_cgoutnak;
}
static void core_dev_init(void)
{
unsigned int num_in_ep = 0;
unsigned int num_out_ep = 0;
unsigned int i;
/* Restart the phy clock */
PCGCCTL = 0;
/* Set phy speed : high speed */
DCFG = (DCFG & ~bitm(DCFG, devspd)) | DCFG_devspd_hs_phy_hs;
/* Check hardware capabilities */
if(extract(GHWCFG2, arch) != GHWCFG2_ARCH_INTERNAL_DMA)
panicf("usb: wrong architecture (%ld)", extract(GHWCFG2, arch));
if(extract(GHWCFG2, hs_phy_type) != GHWCFG2_PHY_TYPE_UTMI)
panicf("usb: wrong HS phy type (%ld)", extract(GHWCFG2, hs_phy_type));
if(extract(GHWCFG2, fs_phy_type) != GHWCFG2_PHY_TYPE_UNSUPPORTED)
panicf("usb: wrong FS phy type (%ld)", extract(GHWCFG2, fs_phy_type));
if(extract(GHWCFG4, utmi_phy_data_width) != 0x2)
panicf("usb: wrong utmi data width (%ld)", extract(GHWCFG4, utmi_phy_data_width));
if(!(GHWCFG4 & GHWCFG4_ded_fifo_en)) /* it seems to be multiple tx fifo support */
panicf("usb: no multiple tx fifo");
#ifdef USE_CUSTOM_FIFO_LAYOUT
if(!(GHWCFG2 & GHWCFG2_dyn_fifo))
panicf("usb: no dynamic fifo");
if(GRXFSIZ != DATA_FIFO_DEPTH)
panicf("usb: wrong data fifo size");
#endif /* USE_CUSTOM_FIFO_LAYOUT */
/* do some logging */
logf("hwcfg1: %08lx", GHWCFG1);
logf("hwcfg2: %08lx", GHWCFG2);
logf("hwcfg3: %08lx", GHWCFG3);
logf("hwcfg4: %08lx", GHWCFG4);
logf("%ld endpoints", extract(GHWCFG2, num_ep));
num_in_ep = 0;
num_out_ep = 0;
for(i = 0; i < extract(GHWCFG2, num_ep); i++)
{
if(GHWCFG1 & GHWCFG1_IN_EP(i))
num_in_ep++;
if(GHWCFG1 & GHWCFG1_OUT_EP(i))
num_out_ep++;
logf(" EP%d: IN=%s OUT=%s", i,
GHWCFG1 & GHWCFG1_IN_EP(i) ? "yes" : "no",
GHWCFG1 & GHWCFG1_OUT_EP(i) ? "yes" : "no");
}
if(num_in_ep != extract(GHWCFG4, num_in_ep))
panicf("usb: num in ep mismatch(%d,%lu)", num_in_ep, extract(GHWCFG4, num_in_ep));
if(num_in_ep != NUM_IN_EP)
panicf("usb: num in ep static mismatch(%u,%u)", num_in_ep, NUM_IN_EP);
if(num_out_ep != NUM_OUT_EP)
panicf("usb: num out ep static mismatch(%u,%u)", num_out_ep, NUM_OUT_EP);
logf("%d in ep, %d out ep", num_in_ep, num_out_ep);
logf("initial:");
logf(" tot fifo sz: %lx", extract(GHWCFG3, dfifo_len));
logf(" rx fifo: [%04x,+%4lx]", 0, GRXFSIZ);
logf(" nptx fifo: [%04lx,+%4lx]", GET_FIFOSIZE_START_ADR(GNPTXFSIZ),
GET_FIFOSIZE_DEPTH(GNPTXFSIZ));
#ifdef USE_CUSTOM_FIFO_LAYOUT
/* Setup FIFOs */
/* Organize FIFO as follow:
* 0 -> rxfsize : RX fifo
* rxfsize -> rxfsize + nptxfsize : TX fifo for first IN ep
* rxfsize + nptxfsize -> rxfsize + 2 * nptxfsize : TX fifo for second IN ep
* rxfsize + 2 * nptxfsize -> rxfsize + 3 * nptxfsize : TX fifo for third IN ep
* ...
*/
unsigned short adr = 0;
unsigned short depth = RX_FIFO_SIZE;
GRXFSIZ = depth;
adr += depth;
depth = NPTX_FIFO_SIZE;
GNPTXFSIZ = MAKE_FIFOSIZE_DATA(adr, depth);
adr += depth;
for(i = 1; i <= NUM_IN_EP; i++)
{
depth = EPTX_FIFO_SIZE;
DIEPTXFSIZ(i) = MAKE_FIFOSIZE_DATA(adr, depth);
adr += depth;
}
if(adr > DATA_FIFO_DEPTH)
panicf("usb: total data fifo size exceeded");
#endif /* USE_CUSTOM_FIFO_LAYOUT */
for(i = 1; i <= NUM_IN_EP; i++)
{
logf(" dieptx fifo(%2u): [%04lx,+%4lx]", i,
GET_FIFOSIZE_START_ADR(DIEPTXFSIZ(i)),
GET_FIFOSIZE_DEPTH(DIEPTXFSIZ(i)));
}
/* Setup interrupt masks for endpoints */
/* Setup interrupt masks */
DOEPMSK = DOEPINT_setup | DOEPINT_xfercompl | DOEPINT_ahberr
| DOEPINT_epdisabled;
DIEPMSK = DIEPINT_xfercompl | DIEPINT_timeout
| DIEPINT_epdisabled | DIEPINT_ahberr;
DAINTMSK = 0xffffffff;
reset_endpoints();
/* fixme: threshold tweaking only takes place if we use multiple tx fifos it seems */
/* only dump them for now, leave threshold disabled */
/*
logf("threshold control:");
logf(" non_iso_thr_en: %d", (DTHRCTL & DTHRCTL_non_iso_thr_en) ? 1 : 0);
logf(" iso_thr_en: %d", (DTHRCTL & DTHRCTL_iso_thr_en) ? 1 : 0);
logf(" tx_thr_len: %lu", extract(DTHRCTL, tx_thr_len));
logf(" rx_thr_en: %d", (DTHRCTL & DTHRCTL_rx_thr_en) ? 1 : 0);
logf(" rx_thr_len: %lu", extract(DTHRCTL, rx_thr_len));
*/
DTHRCTL = 0;
/* enable USB interrupts */
enable_device_interrupts();
}
static void core_init(void)
{
/* Disconnect */
DCTL |= DCTL_sftdiscon;
/* Select UTMI+ 16 */
GUSBCFG |= GUSBCFG_phy_if;
/* fixme: the current code is for internal DMA only, the clip+ architecture
* define the internal DMA model */
/* Set burstlen and enable DMA*/
GAHBCFG = (GAHBCFG_INT_DMA_BURST_INCR4 << GAHBCFG_hburstlen_bitp)
| GAHBCFG_dma_enable;
/* Disable HNP and SRP, not sure it's useful because we already forced dev mode */
GUSBCFG &= ~(GUSBCFG_srpcap | GUSBCFG_hnpcapp);
/* perform device model specific init */
core_dev_init();
/* Reconnect */
DCTL &= ~DCTL_sftdiscon;
}
static void enable_global_interrupts(void)
{
VIC_INT_ENABLE = INTERRUPT_USB;
GAHBCFG |= GAHBCFG_glblintrmsk;
}
static void disable_global_interrupts(void)
{
GAHBCFG &= ~GAHBCFG_glblintrmsk;
VIC_INT_EN_CLEAR = INTERRUPT_USB;
}
void usb_drv_init(void)
{
logf("usb_drv_init");
/* Enable PHY and clocks (but leave pullups disabled) */
as3525v2_connect();
logf("usb: synopsis id: %lx", GSNPSID);
/* Core init */
core_init();
/* Enable global interrupts */
enable_global_interrupts();
}
void usb_drv_exit(void)
{
logf("usb_drv_exit");
}
static bool handle_reset(void)
{
logf("usb: bus reset");
/* Clear the Remote Wakeup Signalling */
DCTL &= ~DCTL_rmtwkupsig;
/* Flush FIFOs */
flush_tx_fifos(0x10);
/* Flush the Learning Queue */
GRSTCTL = GRSTCTL_intknqflsh;
reset_endpoints();
/* Reset Device Address */
DCFG &= bitm(DCFG, devadr);
usb_core_bus_reset();
return true;
}
static bool handle_enum_done(void)
{
logf("usb: enum done");
/* read speed */
logf("DSTS: %lx", DSTS);
logf("DOEPCTL0=%lx", DOEPCTL(0));
logf("DOEPTSIZ=%lx", DOEPTSIZ(0));
logf("DIEPCTL0=%lx", DIEPCTL(0));
logf("DOEPMSK=%lx", DOEPMSK);
logf("DIEPMSK=%lx", DIEPMSK);
logf("DAINTMSK=%lx", DAINTMSK);
logf("DAINT=%lx", DAINT);
logf("GINTSTS=%lx", GINTSTS);
logf("GINTMSK=%lx", GINTMSK);
logf("DCTL=%lx", DCTL);
logf("GAHBCFG=%lx", GAHBCFG);
logf("GUSBCFG=%lx", GUSBCFG);
logf("DCFG=%lx", DCFG);
logf("DTHRCTL=%lx", DTHRCTL);
switch(extract(DSTS, enumspd))
{
case DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
logf("usb: HS");
break;
case DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
case DSTS_ENUMSPD_FS_PHY_48MHZ:
logf("usb: FS");
break;
case DSTS_ENUMSPD_LS_PHY_6MHZ:
panicf("usb: LS is not supported");
}
/* fixme: change EP0 mps here */
return true;
}
static bool handle_in_ep_int(void)
{
panicf("usb: in ep int");
return false;
}
static bool handle_out_ep_int(void)
{
panicf("usb: out ep int");
return false;
}
static void dump_intsts(char *buffer, size_t size, unsigned long sts)
{
(void) size;
buffer[0] = 0;
#define DUMP_CASE(name) \
if(sts & GINTMSK_##name) strcat(buffer, #name " ");
DUMP_CASE(modemismatch)
DUMP_CASE(otgintr)
DUMP_CASE(sofintr)
DUMP_CASE(rxstsqlvl)
DUMP_CASE(nptxfempty)
DUMP_CASE(ginnakeff)
DUMP_CASE(goutnakeff)
DUMP_CASE(i2cintr)
DUMP_CASE(erlysuspend)
DUMP_CASE(usbsuspend)
DUMP_CASE(usbreset)
DUMP_CASE(enumdone)
DUMP_CASE(isooutdrop)
DUMP_CASE(eopframe)
DUMP_CASE(epmismatch)
DUMP_CASE(inepintr)
DUMP_CASE(outepintr)
DUMP_CASE(incomplisoin)
DUMP_CASE(incomplisoout)
DUMP_CASE(portintr)
DUMP_CASE(hcintr)
DUMP_CASE(ptxfempty)
DUMP_CASE(conidstschng)
DUMP_CASE(disconnect)
DUMP_CASE(sessreqintr)
DUMP_CASE(wkupintr)
buffer[strlen(buffer) - 1] = 0;
}
/* interrupt service routine */
void INT_USB(void)
{
/* some bits in GINTSTS can be set even though we didn't enable the interrupt source
* so AND it with the actual mask */
unsigned long sts = GINTSTS & GINTMSK;
unsigned long handled_one = 0; /* mask of all listed one (either handled or not) */
#define HANDLED_CASE(bitmask, callfn) \
handled_one |= bitmask; \
if(sts & bitmask) \
{ \
if(!callfn()) \
goto Lerr; \
}
#define UNHANDLED_CASE(bitmask) \
handled_one |= bitmask; \
if(sts & bitmask) \
goto Lunhandled;
/* device part */
HANDLED_CASE(GINTMSK_usbreset, handle_reset)
HANDLED_CASE(GINTMSK_enumdone, handle_enum_done)
/*
HANDLED_CASE(GINTMSK_inepintr, handle_in_ep_int)
HANDLED_CASE(GINTMSK_outepintr, handle_out_ep_int)
*/
UNHANDLED_CASE(GINTMSK_outepintr)
UNHANDLED_CASE(GINTMSK_inepintr)
/* common part */
UNHANDLED_CASE(GINTMSK_otgintr)
UNHANDLED_CASE(GINTMSK_conidstschng)
UNHANDLED_CASE(GINTMSK_disconnect)
/* unlisted ones */
if(sts & ~handled_one)
goto Lunhandled;
GINTSTS = GINTSTS;
return;
Lunhandled:
panicf("unhandled usb int: %lx", sts);
Lerr:
panicf("error in usb int: %lx", sts);
}
int usb_drv_port_speed(void)
{
return 0;
}
int usb_drv_request_endpoint(int type, int dir)
{
(void) type;
(void) dir;
return -1;
}
void usb_drv_release_endpoint(int ep)
{
(void) ep;
}
void usb_drv_cancel_all_transfers(void)
{
}
int usb_drv_recv(int ep, void *ptr, int len)
{
(void) ep;
(void) ptr;
(void) len;
return -1;
}
int usb_drv_send(int ep, void *ptr, int len)
{
(void) ep;
(void) ptr;
(void) len;
return -1;
}
int usb_drv_send_nonblocking(int ep, void *ptr, int len)
{
(void) ep;
(void) ptr;
(void) len;
return -1;
}
void usb_drv_set_test_mode(int mode)
{
(void) mode;
}
void usb_drv_set_address(int address)
{
(void) address;
}
void usb_drv_stall(int ep, bool stall, bool in)
{
(void) ep;
(void) stall;
(void) in;
}
bool usb_drv_stalled(int ep, bool in)
{
(void) ep;
(void) in;
return true;
}
Reference in a new issue View git blame Copy permalink