1) "Charge during USB connection" option is now tristate: off/on/force. Currently "force" behaves just like "on", but in future it will allow charging even when it was not possible to positively identify a charger.
2) The H300 code has been adjusted to use the new system but there should be no functional differences, it already had the USB charging option and its USB/charging support is hardware controlled.
3) The Gigabeat S code has been adjusted to use the new system: the player now has the USB charging option, which wasn't previously available. The player will only charge at full speed when allowed to do so by a working USB host, so USB AC adapters won't work very well; however, they didn't work before either, so this is not a change in functionality.
4) The iPod Nano 2G code has been adjusted to use the new system: it already had the USB charging option. Using a USB AC adapter won't charge at full speed any more (it did before) - the old implementation was equivalent to the not-yet-implemented "force" option in the new system.
No other target should be affected. Support for the "force" mode and support for at least some other iPod models will come in a future commit :)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26570 a1c6a512-1295-4272-9138-f99709370657
(forward port of r26481 + cosmetics)
This lead to freezes under various conditons (bug report: FS#11267)
Battery life is almost not (if at all) affected:
- between 4 and 8 minutes less runtime for fuzev1
- 9 minutes less runtime for c200v2 (2 minutes difference on a 2 hours run)
Additional verifications of the runtime (including on other models) wouldn't hurt
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26512 a1c6a512-1295-4272-9138-f99709370657
reorder static functions to avoid the need for early prototypes
panic if the INT_AUDIO callback could not read the 3 IRQ_ENRD registers
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26445 a1c6a512-1295-4272-9138-f99709370657
this removes workaround for spurious interrupts added in r26316
side effect: make keyclicks work correctly when used intensively (with
the scrollwheel for example), the clicks should be inserted fast enough
for the PCM fifo to not become empty.
PL190 can cause spurious interrupts if an interrupt is triggered by a
peripheral shortly before the interrupt for this peripheral is cleared
from VIC registers.
As an effect we should only write in VIC_INT_EN_CLEAR after having
disabled the source of the interrupt in the peripheral.
references on PL190 spurious interrupts:
- http://www.embeddedrelated.com/groups/lpc2000/show/14599.php
- http://water.cse.unsw.edu.au/esdk/lpc2/spurious-irq.html
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26444 a1c6a512-1295-4272-9138-f99709370657
Using BX has the effect to set the T bit, so it can return to a thumb
function
With this change, rockbox runs fine on Clipv2 built with -mthumb (for
most files which don't use inline 32 bits ARM assembly)
Some other places use code which change the T bit on armv5 but not on
armv4 so armv4 won't run
See FS#6734
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26386 a1c6a512-1295-4272-9138-f99709370657
invert setting isn't remembered when backlight goes off and lcd_enable()
is ran again
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26374 a1c6a512-1295-4272-9138-f99709370657
Waiting for TRAN state after the end of the transfer caused writing problems for some uSD cards. Removing this wait returns write functionality to those cards.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26365 a1c6a512-1295-4272-9138-f99709370657
(apply r23738 to as3525v2 code)
extend the arbitrary delay to 5 seconds, we never know
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26342 a1c6a512-1295-4272-9138-f99709370657
tick_start, fmradio_i2c_init, pcm_init, pcm_postinit, pcm_play_dma_init
Also add some as3525 target specific functions
Make as3525v2 use this attribute
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26328 a1c6a512-1295-4272-9138-f99709370657
Even if we disable it in VIC_INT_EN_CLEAR, it still fires an interrupt
by running the default isr.
Locking requires disabling interrupts completely.
I'm not sure if DMAC is the only interrupt affected or if we can't rely
on VIC_INT_EN_CLEAR to mask interrupts.
If it's the latter, we will need to have special locking scheme for
INT_AUDIO.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26316 a1c6a512-1295-4272-9138-f99709370657
since it's now the default thread which is implicitely created by starting the sim.
This caused a segfault that r26283 tried to fix. Revert r26283 and protect
the main thread from being removed.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26315 a1c6a512-1295-4272-9138-f99709370657
Declare VIC registers holding function pointers as volatile pointers to
function pointers and access them directly without casting
UIRQ() is an IRQ handler too, even if it doesn't return
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26313 a1c6a512-1295-4272-9138-f99709370657
- retry failed commands up to 6 times
- wait at most 5 seconds for the card to go to TRAN state
- wait for the card to be in TRAN state (i.e. not programming) before
disabling SD clocks (remove the workaround in sd_enable() )
should fix lockups reported on fuzev1 under heavy internal storage + µSD use
(playback + database/pictureflow updating)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26291 a1c6a512-1295-4272-9138-f99709370657
Selecting the right card before the transfer will deselect the other one
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26290 a1c6a512-1295-4272-9138-f99709370657
