Allow user to select cpu undervolt
There have been quite a few issues across the SANSA AMS line related
to CPU undervolting while most players show greatly increased runtime
some crash.
Rather than constanly upping the voltage we now have a
setting with a safe value for all players and the option for lower voltages
I plan to add a few other options here later such as disk
timings and maybe some other clocks/experimental settings
Added: Disk Low speed option for AS3525v2 devices cuts
frequency to 12 MHz from 24 MHz
Added: Disk Low speed option for AS3525v1 devices cuts
frequency to 15.5 MHz from 31 MHz
Added: I2c Low Speed AS3525 devices, should be bigger improvement for v1 devices
Fixed: Debug menu for AS3525v2 No SDSLOT frequency,
Showed IDE freq though it is unused
Added: DBOP and SSP underclocking affects display on v1/v2 respectively
Fixed: debug menu now has SSP frequency, and SSP_CPSR
Update: made settings menu more generic
Update: cleaned up code
Added: Clip v1 & Fuze v1 didn't have HAVE_ADJUSTABLE_CPU_VOLTAGE.
not sure why but, waiting on testing to confirm
Added: C200v2 and E200v2 devices and HAVE_ADJUSTABLE_CPU_VOLTAGE.
Fixed: v1 devices don't like display timing set lower (dbop)
v1 devices don't have a divider set for ssp (causes divide by 0)
Fixed: ClipZip display lags with Max SSP divider changed from 0xFE to 0x32
Fixed: v1 devices didn't work properly with highspeed sd cards
Added code from http://gerrit.rockbox.org/r/#/c/1704/
Added powersave and IDE interface enable/disable
Added: V2 devices now have powersave enabled on sd interface
Update: cleaned up code, lang defines, added manual entries
Update ssp clock mechanism added calculated ssp divider to clipzip
Update turn display clock off when clip+ turns off display
Fixed: clipzip wrong register for SSP clock
Change-Id: I04137682243be92f0f8d8bf1cfa54fbb1965559b
TODO: add other players?
I2c controller needs to be enabled in order to read CSPR0, CSPR1
registers function sets CGU_I2C_AUDIO_MASTER_CLOCK_ENABLE
and only clears if it wasn't previously enabled
Use divider set in register to calculate frequency rather than
hard coded divider
Change-Id: I54ecc0c1859e906c00f4c2ae8ae2424a4619df98
Also removes the sd_enable() function call. It was only used in
the debug screen on AMSv1 and not used at all on AMS v2.
For v1,obtain debug info in a struture passed to a dedicated
debug info function so that enabling and disabling the controller
isn't racy.
Change-Id: I7c44693bc2df5a1f16168b05b3abfe622f9584ce
1. Slightly revised and regularized internal interface. Callback is used
for read and write to provide completion signal instead of having two
mechanisms.
2. Lower overhead for asynchronous or alterate completion callbacks. We
now only init what is required by the transfer. A couple unneeded
structure members were also nixed.
3. Fixes a bug that would neglect a semaphore wait if pumping the I2C
interrupts in a loop when not in thread state or interrupts are masked.
4. Corrects broken initialization order by defining KDEV_INIT, which
makes kernel_init() call kernel_device_init() to initialize additional
devices _after_ the kernel, threading and synchronization objects are
safe to use.
5. Locking set_cpu_frequency has to be done at the highest level in
system.c to ensure the boost counter and the frequency are both set in
agreement. Reconcile the locking inteface between PP and AMS (the only
two currently using locking there) to keep it clean.
Now works fine with voltages in GIT HEAD on my Fuze v2, type 0.
Previously, everything crashed and died instantly. action.c calling
set_cpu_frequency from a tick was part of it. The rest may have been
related to 3. and 4. Honestly, I'm not certain!
Testing by Mihail Zenkov indicates it solves our problems. This will
get the developer builds running again after the kernel assert code
push.
Change-Id: Ie245994fb3e318dd5ef48e383ce61fdd977224d4
- Revert BUTTON_HOME
- Modifications to SD driver (µSD not working yet)
TODO: µSD and FM radio
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27492 a1c6a512-1295-4272-9138-f99709370657
test_disk says everything is alright but playback is buggy, especially
when playing lossless files
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27044 a1c6a512-1295-4272-9138-f99709370657
AMSv2 and AMSv1 lowmem put the codec buffer in IRAM so we need to adjust
the address : AS3525_PHYSICAL_ADDRESS macro will do just that
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26954 a1c6a512-1295-4272-9138-f99709370657
test_disk shows 1MB transfers are up to 3 times faster
not much difference for 1 or 8 sectors at a time
define STORAGE_WANTS_ALIGN to use the fast path when possible
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26953 a1c6a512-1295-4272-9138-f99709370657
it achieves all the requirements, work fine on c200v2, and is much simpler
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26933 a1c6a512-1295-4272-9138-f99709370657
Reserve 1MB of DRAM for loading rockbox and use the rest as BSS
Write sdram setup in assembler and move it to a separate file, together
with MMU init code
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26926 a1c6a512-1295-4272-9138-f99709370657
detect wraps so we don't miss the value we were waiting for
fix audio stuttering on fuzev2
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25740 a1c6a512-1295-4272-9138-f99709370657
Use it in fuzev2 to improve some big delays (correct the biggest one to actually wait for the fifo to empty), and use it in the sd drivers.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25734 a1c6a512-1295-4272-9138-f99709370657
- cache IRAM and DRAM
- map IRAM just next to DRAM to remove the need for -mlong-calls and reduce binsize
- tweak delays in Fuze button code
- tweak delays in Clip button code (down button sometimes doesn't respond anyway : an alternate driver is being worked on)
Before reporting any problem, please check your filesystem or format your player from the OF
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21228 a1c6a512-1295-4272-9138-f99709370657
Reorder system_init() to initialize peripherals not only in bootloader
Use a 65MHz PCLK (and memclk) which will be needed for realtime decoding
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19330 a1c6a512-1295-4272-9138-f99709370657
Fix lcd drivers which stopped working after changing the PLL.
Move set_cpu_frequency() to a place where it is actually used.
Remove enable_irq() call already done by the bootloader
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19276 a1c6a512-1295-4272-9138-f99709370657
Use a 24MHz peripheral clock instead of 64MHz for battery life
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19234 a1c6a512-1295-4272-9138-f99709370657
2008-11-26 16:46:12 +00:00
Renamed from firmware/target/arm/as3525/sansa-clip/system-target.h (Browse further)
