Dave Chapman
|
9c1ab1f057
|
Convert the TCC77x ADC driver to use interrupts - based on the technique used in the SH ADC driver.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17311 a1c6a512-1295-4272-9138-f99709370657
|
2008-05-03 07:49:39 +00:00 |
|
Dave Chapman
|
f2042983f0
|
Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17306 a1c6a512-1295-4272-9138-f99709370657
|
2008-05-02 19:12:09 +00:00 |
|
Jens Arnold
|
2bbacf89fe
|
Make sure the linker considers crt0*.o before all files specified on the command line by using STARTUP() instead of INPUT() in the .lds. Using INPUT() makes the linker process crt0*.o after all files specified on the command line, making linking fail if there are librockbox.a members which are only referenced by crt0*.o. Remove the hackaround that was needed for building the gigabeat S bootloader before (aka UIE() problem).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17289 a1c6a512-1295-4272-9138-f99709370657
|
2008-04-29 06:19:32 +00:00 |
|
Dave Chapman
|
fec6af659f
|
Move the Telechips TCC77x SSD1815 LCD driver up a level in the target tree - it isn't specific to the DAX.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17253 a1c6a512-1295-4272-9138-f99709370657
|
2008-04-27 08:30:14 +00:00 |
|
Marcoen Hirschberg
|
82c52302bd
|
split boot.lds and move it into the target tree
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16855 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-27 23:58:03 +00:00 |
|
Jens Arnold
|
68a21689ae
|
Consistent naming scheme the various blit functions. * Removed lcd_blit_mono() for colour targets. Plugin API became incompatible, so sort, clean up & bump. * Implemented lcd_blit_mono() for M3.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16775 a1c6a512-1295-4272-9138-f99709370657
|
2008-03-24 00:35:53 +00:00 |
|
Jens Arnold
|
ef12b3b5c6
|
Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15599 a1c6a512-1295-4272-9138-f99709370657
|
2007-11-12 18:49:53 +00:00 |
|
Dave Chapman
|
a4d48d0c0d
|
Button driver for Logik DAX, plus some changes to the debug info displayed in the bootloader build.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15396 a1c6a512-1295-4272-9138-f99709370657
|
2007-11-01 23:38:57 +00:00 |
|
Dave Chapman
|
28f6ae49ec
|
Initial work on a port to the Logik DAX 1GB MP3/DAB player. The bootloader build compiles and runs (but only displays some debugging info), and the LCD and ADC drivers are working. Two different bootloader builds are possible: 1) The default build is just a test application for uploading to the device via tcctool; 2) Adding -DTCCBOOT to EXTRA_DEFINES in the build directory Makefile will compile the bootloader so that it can be appended to the end of the original firmware and installed on the device, dual-booting. This commit also includes some work by Hein-Pieter van Braam on a port to the iAudio 7, but that doesn't build yet. A large part of these ports will be generic to all TCC77x devices - see the TelechipsInfo wiki page for some other devices with this CPU. NOTE: Compiling these builds requires an arm-elf-gcc with armv5 support - the current version of rockboxdev.sh compiles such a gcc.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15339 a1c6a512-1295-4272-9138-f99709370657
|
2007-10-28 11:08:10 +00:00 |
|