Commit graph

120 commits

Author SHA1 Message Date
Jens Arnold
feb5b15e9b All-new greyscale library, replacing the old one. Features: (1) Drawing/updating is faster than the old grayscale lib at full depth. (2) Always 129 shades instead of 2..33 shades. (3) No graininess caused by frequent updates (mpegplayer, doom, ...). (4) Needs less memory than the old grayscale lib at full depth. * The tradeoff is slightly higher CPU load in the ISR (frames are calculated 'live') and an extra function in the core. * Ported all plugins which used the graylib to use the new one. * Some slight optimisations for archos and H1x0 LCD update.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15998 a1c6a512-1295-4272-9138-f99709370657
2008-01-04 23:42:38 +00:00
Jens Arnold
f4c5c6aa62 Fix bootloaders, and the backlight-modded Ondio build.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15600 a1c6a512-1295-4272-9138-f99709370657
2007-11-12 19:19:38 +00:00
Jens Arnold
ef12b3b5c6 Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15599 a1c6a512-1295-4272-9138-f99709370657
2007-11-12 18:49:53 +00:00
Barry Wardell
0d8111cb39 Split radio i2c drivers into target tree where they belong. No changes to binaries produced.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15558 a1c6a512-1295-4272-9138-f99709370657
2007-11-10 19:14:01 +00:00
Jens Arnold
3674af6441 Coldfire: Partially revert buffered writes, and enable them explicitly for the LCD only. Turned out that with buffered writes enabled, reads after writes are not always serialized, which is a bad thing for I/O. Buffered writes to the LCD are safe because that's write-only. Fixes FS #7985. How come I didn't notice this earlier? :>
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15173 a1c6a512-1295-4272-9138-f99709370657
2007-10-17 20:45:13 +00:00
Jens Arnold
b85b6be3aa Coldfire targets: enable buffered writes by default. Speeds up all sorts of I/O that writes to ports: LCD update (except the functions using DMA on H300), ATA writes, .... Some timings had to be adjusted for the new configuration.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15129 a1c6a512-1295-4272-9138-f99709370657
2007-10-15 21:16:50 +00:00
Jens Arnold
99f9550881 H300, X5: Optimised lcd_yuv_blit(), using line-pair zig-zag writing to the LCD controller. ~7% speedup on H300, ~5% speedup on X5.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15111 a1c6a512-1295-4272-9138-f99709370657
2007-10-14 23:05:56 +00:00
Steve Bavin
c90c18ea67 Thanks to LinusN, fix Coldfire bootloaders not booting - FS#7533
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14949 a1c6a512-1295-4272-9138-f99709370657
2007-10-02 07:54:50 +00:00
Dave Chapman
1672350378 FS #7691 - improved USB detection on PP devices. This patch modifies the target-tree function usb_detect() on all targets from bool to int, returning USB_INSERTED or USB_EXTRACTED instead of true or false. This was done to enable the PP usb_detect() to check for USB_POWER (either a connection to a USB wall charger, or the user holding "charge mode" button) and return that as a third value.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14600 a1c6a512-1295-4272-9138-f99709370657
2007-09-04 08:03:07 +00:00
Jens Arnold
bfa1adcd06 H300: Read battery voltage with 10bit precision.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14379 a1c6a512-1295-4272-9138-f99709370657
2007-08-17 20:47:24 +00:00
Jens Arnold
0fac492c3d First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
2007-08-17 06:45:18 +00:00
Jens Arnold
8a177345ce Moved archos power handling into target tree. * Tuner power handling cleaned up a bit.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14345 a1c6a512-1295-4272-9138-f99709370657
2007-08-14 22:06:23 +00:00
Nils Wallménius
f28da1a35a Enable a lot more features for simulators and add stubs where necessary, simulators should now work with identical lng and voice files as the respective target
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14299 a1c6a512-1295-4272-9138-f99709370657
2007-08-12 19:49:03 +00:00
Michael Sevakis
60b01fa0f7 Straignten out some issues with HAVE_LCD_ENABLE. 1g/2g/3g had it defined but it shouldn't have been. lcd_enabled() was only available as a real function on gigabeat but others can use that too. Markup lcd.h a bit because I got a bit lost in it.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14100 a1c6a512-1295-4272-9138-f99709370657
2007-07-31 12:43:06 +00:00
Jens Arnold
2e2f92c906 H1x0, H300: Get rid of the adc tick, and use the same concept as the iAudio ADC driver.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14079 a1c6a512-1295-4272-9138-f99709370657
2007-07-30 19:13:59 +00:00
Michael Sevakis
58fc279d26 Scroll on main and remote with a single thread. Change the way system messages are defined before running out is an issue (which requires a full update of rockbox on the player).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14035 a1c6a512-1295-4272-9138-f99709370657
2007-07-28 08:12:05 +00:00
Jens Arnold
3deb27053a Fix red bootloader builds. * Fix non-working PP5022 bootloaders. Also define correct IRAM size for PP5022/PP5024 bootloaders.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14015 a1c6a512-1295-4272-9138-f99709370657
2007-07-26 21:51:44 +00:00
Michael Sevakis
7d759f6b9c Do some planned radio interface cleanup since adding in the LV24020LP.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13880 a1c6a512-1295-4272-9138-f99709370657
2007-07-14 11:20:31 +00:00
Magnus Holmgren
7d5deaa5a0 H1x0: Increase delay during button reads. Hopefully fixes the scroll down problem (see forum thread 11081.0).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13765 a1c6a512-1295-4272-9138-f99709370657
2007-07-02 18:47:02 +00:00
Michael Sevakis
070417d152 Forget all the nonsense with C delay loops. 'volatile' on the variable makes bloated code and a volatile, blank asm block inside may or may not be optimized out. Use asm delay loops instead for Coldfire. Radio i2c driver also needs NACK after reading last tuner byte. Get the volatile off the Ondio loops (not needed here now). Maybe this is straightened out now.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13725 a1c6a512-1295-4272-9138-f99709370657
2007-06-27 03:11:49 +00:00
Nils Wallménius
8dc1a67bba Fix iriver H100 i2c driver which was broken by the switch to build with -Os. Fixes FS#7316 and FS#7321
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13676 a1c6a512-1295-4272-9138-f99709370657
2007-06-19 20:39:30 +00:00
Michael Sevakis
2d48d0ffa6 Straighten out some audio path APIs and misc. audio stuff. Having recording is not a prerequisite to having input/output source selection which is probably most useful when adding a audio input features like FM to a new port without forcing recording to be implemented first.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13599 a1c6a512-1295-4272-9138-f99709370657
2007-06-08 23:42:04 +00:00
Jens Arnold
c49d5dd631 Coldfire targets: Adjusted PLL settings (lowest possible VCO clock for each setting) and IDE timing (especially it's faster now on M5+X5). * Added/updated table showing the necessary settings (PLL, refresh, waitstates, IDE timing) for each possible clock frequency.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13230 a1c6a512-1295-4272-9138-f99709370657
2007-04-21 09:29:01 +00:00
Jens Arnold
47bf6c5a5a Moved archos backlight code to target tree. Changed old mutlivalue CONFIG_BACKLIGHT to a simple HAVE_BACKLIGHT.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13136 a1c6a512-1295-4272-9138-f99709370657
2007-04-12 22:12:13 +00:00
Jens Arnold
fad79dc636 Moved archos USB handling to target tree. Minor simplification for coldfire (only one usb-target.h).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13110 a1c6a512-1295-4272-9138-f99709370657
2007-04-11 20:44:32 +00:00
Michael Sevakis
633f388002 Coldfire targets: Shuffle IRQ levels around to have all interaction between low level audio function calls and DMA be atomic. Make recording and playback independently startable and stoppable so one can be running and not interfere with the other. All tests I can do at the moment check out ok (play, record, play+record, FM radio on iRivers, S/PDIF on H120 (w/running optical on/off), and on-the-fly samplerate changes). Recording tested for well over an hour run and no problems.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12658 a1c6a512-1295-4272-9138-f99709370657
2007-03-07 06:23:02 +00:00
Michael Sevakis
8867d00141 More catching up on old work. Refine audio interface setup on Coldfire. Stop the funky glitching on the iAudio stuff when starting recording esp. at 88.2kHz. (probably due to the bidi interface). iRivers don't seem to care what you do. TLV320 still seems to have a little trouble selecting it's filters correctly for 88.2kHz or it could be some odd phasing effect. Get rid of the horrible reset parameter in pcm_apply_settings as it can decide for itself.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12618 a1c6a512-1295-4272-9138-f99709370657
2007-03-05 08:14:27 +00:00
Michael Sevakis
198772a6b2 iRiver H100 series: Catching up on old work. Use a better way to keep playback going when switching optical output. Doesn't mess with the DMA peripheral requests to do it like before but just writes a sample to the FIFO. Would really like to reformulate interrupt scheme on Coldfire to allow DMA interrupts to be blocked specifically but not normally.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12605 a1c6a512-1295-4272-9138-f99709370657
2007-03-04 21:43:35 +00:00
Linus Nielsen Feltzing
ff17905d7c H300 bootloader: (Work in progress) Boot Rockbox on RTC alarm, add charging screen, move to a separate source file, backlight is on during USB mode (again)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12546 a1c6a512-1295-4272-9138-f99709370657
2007-03-02 11:28:23 +00:00
Robert Kukla
50b5ee4781 FS#6419 - driver for H1x0 series RTC Mod with runtime detection
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12520 a1c6a512-1295-4272-9138-f99709370657
2007-02-28 13:20:36 +00:00
Jens Arnold
d528e54b61 Move target specific parts of the H100 remote LCD driver to target tree.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12485 a1c6a512-1295-4272-9138-f99709370657
2007-02-25 22:09:14 +00:00
Linus Nielsen Feltzing
9744433752 Move the MPARK init to system_init()
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12452 a1c6a512-1295-4272-9138-f99709370657
2007-02-22 14:54:13 +00:00
Linus Nielsen Feltzing
6c3db6e65f Correct LCD DMA init on the H300
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12450 a1c6a512-1295-4272-9138-f99709370657
2007-02-22 11:57:11 +00:00
Jens Arnold
51223e5395 Introduced LCD_FBHEIGHT in addition to the already existing LCD_FBWIDTH to ease framebuffer handling a bit. Added equivalent definitions for the remote LCD.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12419 a1c6a512-1295-4272-9138-f99709370657
2007-02-20 19:31:34 +00:00
Jens Arnold
c652218d14 Fix remaining CONFIG_TUNER checks.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12385 a1c6a512-1295-4272-9138-f99709370657
2007-02-18 08:46:12 +00:00
Jonathan Gordon
9a6f419775 CONFIG_CHARGING
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12384 a1c6a512-1295-4272-9138-f99709370657
2007-02-18 05:32:06 +00:00
Jonathan Gordon
ac61951452 Do the CONFIG_USBOTG define correctly
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12382 a1c6a512-1295-4272-9138-f99709370657
2007-02-18 04:57:28 +00:00
Jonathan Gordon
1083de8e7d CONFIG_USBOTG fixes
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12377 a1c6a512-1295-4272-9138-f99709370657
2007-02-18 01:17:06 +00:00
Magnus Holmgren
1916576728 Keep delay loop from being optimized away.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12367 a1c6a512-1295-4272-9138-f99709370657
2007-02-17 23:06:50 +00:00
Linus Nielsen Feltzing
1eff300f18 New PLL calculations to make sure that PLLDIV != 0. This seems to solve the problem with the troublesome H140 batch from OutletMP3.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12201 a1c6a512-1295-4272-9138-f99709370657
2007-02-05 00:01:29 +00:00
Linus Nielsen Feltzing
bc76a42eca Corrected the comments regarding USB charging
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12181 a1c6a512-1295-4272-9138-f99709370657
2007-02-02 15:47:28 +00:00
Steve Bavin
338d94f466 FS#4770 - Add USB charging for the H300 series
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12169 a1c6a512-1295-4272-9138-f99709370657
2007-02-01 10:47:22 +00:00
Miika Pekkarinen
73cd9f3b63 Turn backlight ON at boot unless bootloader has already done that.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11992 a1c6a512-1295-4272-9138-f99709370657
2007-01-12 20:26:23 +00:00
Linus Nielsen Feltzing
e2022a26d0 Removed executable flag
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11967 a1c6a512-1295-4272-9138-f99709370657
2007-01-09 23:29:07 +00:00
Michael Sevakis
36c940555c SWCODEC recording: More cleanup of stuff after queue additions and audio driver unification.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11783 a1c6a512-1295-4272-9138-f99709370657
2006-12-17 11:03:19 +00:00
Michael Sevakis
9b720239a3 iRiver: Clearing CRSEL bit when using default CPU frequency caused audio chip to run at half frequency when radio screen called cpu_idle_mode(true) and corresponding high end loss after kepress timeout. CRSEL was originally preserved when bypassing PLL. CRSEL shouldn't have any bearing on PSTCLK or SCLK when PLL is bypassed since the dividers are bypassed as well (except for the divX2 for SCLK).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11695 a1c6a512-1295-4272-9138-f99709370657
2006-12-08 23:33:22 +00:00
Marcoen Hirschberg
77d039bab8 first step in audio driver unification: renaming the functions to audio_*
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11670 a1c6a512-1295-4272-9138-f99709370657
2006-12-06 10:24:59 +00:00
Miika Pekkarinen
46a608bf07 PLL was incorrectly initialized causing system to crash when ran from
ROM.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11669 a1c6a512-1295-4272-9138-f99709370657
2006-12-06 10:02:06 +00:00
Michael Sevakis
81484e4b75 H1x0: Enable optical output to be switched on or off during playback and recording. Fixes FS#6414 - H120 opto out toggle freezes codec. Really DMA just needed a kickstart after setting the optical TXSRC if the peripheral requests were currently enabled (the method of detection).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11661 a1c6a512-1295-4272-9138-f99709370657
2006-12-05 07:38:55 +00:00
Michael Sevakis
ce3ade1360 iRiver: Channel 2 shouldn't be monitored except for radio playback.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11616 a1c6a512-1295-4272-9138-f99709370657
2006-11-27 21:52:49 +00:00
Jens Arnold
0e6dd7efcd Moved archos button reading to target tree. * Cleanup of button.[ch]. * Deactivated serial remote code for recorder FM/V2 as there is no remote pin, saving ~500 bytes of code.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11612 a1c6a512-1295-4272-9138-f99709370657
2006-11-27 02:16:32 +00:00
Linus Nielsen Feltzing
516d277958 The ADC GPIO init code for the H100 was accidentally put in the H300 driver when moving to the target tree
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11582 a1c6a512-1295-4272-9138-f99709370657
2006-11-24 11:06:52 +00:00
Michael Sevakis
ab1861a3c2 iRiver/iAudio: Added audio_set_recording gain and sound_default to plugin API. Simplified plugin recording by target/-ing some audio functions. UDA1380 records with WSPLL as a result.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11577 a1c6a512-1295-4272-9138-f99709370657
2006-11-23 19:21:15 +00:00
Michael Sevakis
4a82f81f79 H100 series: Adjusted gray scale balance and default contrast for more linear gray levels.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11564 a1c6a512-1295-4272-9138-f99709370657
2006-11-21 17:14:07 +00:00
Michael Sevakis
cc50c149e9 H100/General: HAL for S/PDIF and refinement/bufixes in optical output powering/source selection.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11523 a1c6a512-1295-4272-9138-f99709370657
2006-11-13 23:21:54 +00:00
Michael Sevakis
58825f6e73 Coldfire targets: Got the rest of the coldfire code out of backlight.c. Straightened up related items in configs and split backlight_set_brightness between the normal and boot/sim builds like the other functions. Should really have done all that in the first place.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11502 a1c6a512-1295-4272-9138-f99709370657
2006-11-10 18:47:41 +00:00
Michael Sevakis
cf59a4fc1d H300/X5: Moved backlight brightness code to target tree. Created __backlight_set_brightness in backlight-(target).c. backlight_set_brightness range clamps and calls the backlight driver.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11488 a1c6a512-1295-4272-9138-f99709370657
2006-11-10 01:25:52 +00:00
Michael Sevakis
f64f589d2e H100/120: Split lcd driver into pixel format and device specific parts. Adjustment of contrast range to just a little less than white to a little more than black. Really only had to reset minimum.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11487 a1c6a512-1295-4272-9138-f99709370657
2006-11-10 00:02:28 +00:00
Michael Sevakis
a32b33bf83 Forgot to cvs add lcd-as-h100.S.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11469 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:22:30 +00:00
Michael Sevakis
e89a3940f9 More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
Michael Sevakis
0f5cb94aa4 Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11452 a1c6a512-1295-4272-9138-f99709370657
2006-11-06 18:07:30 +00:00
Jens Arnold
f8b1da2f7b H300, X5: Faster lcd_yuv_blit() using EMAC. Speedup of the function itself at 124MHz: 10.5% on X5, 16.5% on H300. mpegplayer speedup 3..4%
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11429 a1c6a512-1295-4272-9138-f99709370657
2006-11-04 00:42:18 +00:00
Jens Arnold
83aded979f H300: (1) Use DMA for LCD updates, with auto-aligned line reads. Speeds up LCD updates by ~ 75% at 11MHz and 45MHz. Only ~ 11% speedup at 124MHz due to (2). (2) Less aggressive LCD transfer timing at 124MHz. With the previous timing, slightly corrupted display contents was reported, and with DMA transfers at least 4 waitstates are needed to make updates work at all. * A table in system-iriver.c shows settings for all integer multiples of the base clock frequency (info for developers, not yet complete).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11418 a1c6a512-1295-4272-9138-f99709370657
2006-11-02 20:50:50 +00:00
Marcoen Hirschberg
ede3d646b9 move coldfire ata defines to a shared ata-target.h
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11395 a1c6a512-1295-4272-9138-f99709370657
2006-10-30 09:38:34 +00:00
Jonathan Gordon
139f9f28e9 move the iriver h1x0/h3x0 targets to the target tree
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11392 a1c6a512-1295-4272-9138-f99709370657
2006-10-30 08:56:06 +00:00
Jens Arnold
62a11ea9e6 Removed unnecessary #include s.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11385 a1c6a512-1295-4272-9138-f99709370657
2006-10-29 19:29:41 +00:00
Jens Arnold
85c9a05c56 H300: Don't read the button ADC as long as no button is pressed, utilising the PCF50606 accessory detect feature. Ported from X5.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11383 a1c6a512-1295-4272-9138-f99709370657
2006-10-29 13:48:57 +00:00
Jonathan Gordon
cad563b00f move the iriver h1x0/h3x0 button driver to target tree
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11380 a1c6a512-1295-4272-9138-f99709370657
2006-10-29 10:26:41 +00:00
Michael Sevakis
784dd78745 Moved pcf50606 stuff to target directory.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11348 a1c6a512-1295-4272-9138-f99709370657
2006-10-25 23:24:07 +00:00
Jens Arnold
9af13c327e H300: * Assembler optimised lcd_yuv_blit(), based on the X5 version. 23..31% speedup in tests depending on video size. * Don't set HORIZ_RAM_ADDR_POS for LCD updates, it's unnecessary. * Started the target tree move for H300 with this.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10724 a1c6a512-1295-4272-9138-f99709370657
2006-08-23 17:30:51 +00:00