we still need to convert uncached addresses to physical addresses
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26177 a1c6a512-1295-4272-9138-f99709370657
No need for special address handling, all addresses are equal to their physical address
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26176 a1c6a512-1295-4272-9138-f99709370657
it's only needed if we hotswap the µSD or if we build the fuzev2
scrollwheel code without irq (which we don't do anyway)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26165 a1c6a512-1295-4272-9138-f99709370657
test_disk doesn't freeze anymore when closing the file between writing & reading
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26164 a1c6a512-1295-4272-9138-f99709370657
The list is ordered by priority, put the DMA and SD interrupts at
the top
This seems to fix the random freezes on heavy storage operation like
building database or pictureflow cache
The recently added audio interrupt had a priority higher than SD slot on
as3525v1, give it a lower priority
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26160 a1c6a512-1295-4272-9138-f99709370657
Show all the adc channels in the IO ports debug menu (not for as3525v2
since the channels are different)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26149 a1c6a512-1295-4272-9138-f99709370657
build it on fuzev2 and clipv2 too, it should be the same controller
as3525v1 file is only build for CONFIG_USBOTG == USBOTG_AS3525, no need
to check for it in the .c file
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26142 a1c6a512-1295-4272-9138-f99709370657
Note to self: Next time don't forget to check a AMSv2 build before committing...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26130 a1c6a512-1295-4272-9138-f99709370657
- Enable end of charge monitoring once, it doesn't need to be disabled
- Acknowledge the first (wrong) end of charge interrupt on charger enable
(this had been broken in r25299)
- Centralize reads to ENRD* registers and cache the results when needed
- on PP it is not needed because reads are atomic, we only check for
end of charge when the charging, and for charger presence when
discharging
as3525v2 (using as3543) specifics
- I got the datasheet today from AMS, thanks to them for being so fast
and not require me to sign tons of papers!
- USB detection now works on as3525v2 using the as3543. Clip+ won't
reboot to OF yet, it needs mkamsboot support first (usbstack disabled)
- Charging should work, the CHARGER register is at a different place, it
is an extended PMU register -> use ascodec_read/write_charger() to
access it
- real interrupts are not used yet for ENRD, we get thousands of
interrupts per second, apparently only limited by the i2c clock.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26116 a1c6a512-1295-4272-9138-f99709370657
Better be safe than sorry, don't try to read/write outside our storage,
because we might overwrite the OF on the internal storage
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26077 a1c6a512-1295-4272-9138-f99709370657
-> Change references to as3517 into as3515
there is a reference to the as3515 in the public as3525 datasheet to
support this fact
as3517 is used in the as3527 SoC, the (public) as3527 datasheet has
detailed information on its registers
the audio codec/PMU used in as3525v2 (thought to be as3543) appears to be
compatible (identical?) with as3517
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26075 a1c6a512-1295-4272-9138-f99709370657
it would still flash when the light was off
it turns out that if B5 is set to input the light can't be turned on
but we can still select between µSD slot and internal storage
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26059 a1c6a512-1295-4272-9138-f99709370657
adjust logical starting sector to physical starting sector after the check
number of blocks is already adjusted from physical to logical
don't panic anymore when accessing the last part of storage
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26050 a1c6a512-1295-4272-9138-f99709370657
Indent the asm constraints at the same level than instructions
Also add a trick to reduce the number of instructions outputted by gcc
in the commented C version of the loop
The difference between C and asm is now 1 instruction
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26027 a1c6a512-1295-4272-9138-f99709370657
This fixes the error introduced in r25989, where it would release the
DMA engine when uninitializing recording.
The real bug has been fixed instead (in pitch_detector)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26003 a1c6a512-1295-4272-9138-f99709370657
also avoid disabling completely the DMA engine in pitch_detector
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25989 a1c6a512-1295-4272-9138-f99709370657
The OF does this and while we don't have the documentation to be sure I think it's highly likely this is a low power mode referred to in one of the product "briefs".
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25936 a1c6a512-1295-4272-9138-f99709370657
This seems to make switching the uSD card to high speed timing much more reliable.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25935 a1c6a512-1295-4272-9138-f99709370657
When the rest of the code is confirmed to work properly without CPU
frequency changes, it will be possible to reliabily test set_cpu_frequency()
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25924 a1c6a512-1295-4272-9138-f99709370657
