surround_enabled was never true, end up dsp_surround_flush didn't work; Thats why a cracking noise occurs in right channel when moving track positions.
redo pbe/surround flush in a much simpler way suits the current single buffer style.
Change-Id: I394054ddfb164b82c90b3dcf49df4442db87d8d2
perceptual bass enhancement
- a bbe-ish group delay corrction with Biophonic EQ boost.
- precut
auditory fatigue reduction
-reduce signal in frequency that may trigger temporary threshold shift
haas surround
-frequency between f(x1) and f(x2) is always bypassed.
-can apply to side only.
Change-Id: Icb6355ce9b1c99bf2c58c9385c3c411c0ae209d3
The origin of the register value was never
moved in the desired register state due to a typo ('rhs' vs. 'rhd').
While looking at the code, I noticed the action taken
for the register value is another copy'n'paste error
from the ADD opcode above -> it added to the register value
instead of MOVing the current value.
Patch submitted upstream.
cppcheck reported:
[lib/unwarminder/unwarm_thumb.c:473]: (warning) Redundant assignment of 'state.regData[rhd].o' to itself.
Change-Id: I78cdbf37a191007a3bddbaa350b906dbce2fe671
Also fix a wrong format specifier for an unsigned variable.
Detected by cppcheck, patch submitted upstream.
Change-Id: I9b84d91eeb242ed77b53ecc16252c5b35190bb9f
Either by mistake or because its meaning changed, usb_powered() doesn't mean
what the name suggest, so clarify its meaning by renaming it to usb_powered_only.
So use of usb_powered() are replaced by usb_inserted() when it makes more sense.
Change-Id: I112887e2d8560e84587bee5f55c826dde8c806d8
Reviewed-on: http://gerrit.rockbox.org/1097
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
If any of those functions should be (unused) API functions,
they can easily be turned back once really needed.
Detected using a new cppcheck check that
uses the internal symbol database to catch
functions that are only used in the current file.
Change-Id: Ic2b1e5b8020b76397f11cefc4e205f3b7ac1f184
- Leave original ptr untouched if allocation fails
(bail out early)
- Behave like malloc() in case ptr is NULL
Change-Id: Ib854ca19bd0e069999b7780d2d9a533ece705add
This file revealed several problems with our ASF parser:
1) The packet count in the ASF was actually a 64 bit value,
leading to overflow in very long files.
2) Seeking blindly trusted the bitrate listed in the ASF header
rather than computing it from the packet size and number of packets.
Fix these problems and fix a few minor issues.
Change-Id: Ie0f68734e6423e837757528ddb155f3bdcc979f3
Forgot to (void) an unused parameter when priorityless.
usb-drv-rl27xx.c was using a compound init to initialize a semaphore
but the structure changed so that it is no longer correct. Use
designated initializers to avoid having to complete all fields.
Forgot to break compatibility on all plugins and codecs since the
kernel objects are now different. Take care of that too and do the
sort thing.
Change-Id: Ie2ab8da152d40be0c69dc573ced8d697d94b0674
including
BAR_PARAMS, %xl, %dr, %T,%St, %xl and %Cl
Change-Id: I0811ebfff5f83085481dcbf08f97b7223f677bfe
Reviewed-on: http://gerrit.rockbox.org/900
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
Speeds up decoding of the 64 kbps test file by 2.59 MHz and the
128 kbps test file by 4.31 MHz on H300 (cf). Decoding the same
files on c200 is sped up by 0.33 MHz and 0.55 MHz respectively.
Change-Id: I0f9f9ef6a7293581cf45e3201b33c65504c95c81
The recent merge of upstream changed the fft to use C_MUL which
wasn't implemented in asm for coldfire.
Speeds up decoding 64 kbps test file by 2.68 MHz and 128 kbps
test file by 2.80 MHz on H300.
Change-Id: I8b61fc0f9568d6350431e311a12e44fe4f60f72e
Sync to commit bb4b6885a139644cf3ac14e7deda9f633ec2d93c
This brings in a bunch of optimizations to decode speed
and memory usage. Allocations are switched from using
the pseudostack to using the real stack. Enabled hacks
to reduce stack usage.
This should fix crashes on sansa clip, although some
files will not play due to failing allocations in the
codec buffer.
Speeds up decoding of the following test files:
H300 (cf) C200 (arm7tdmi) ipod classic (arm9e)
16 kbps (silk) 14.28 MHz 4.00 MHz 2.61 MHz
64 kbps (celt) 4.09 MHz 8.08 MHz 6.24 MHz
128 kbps (celt) 1.93 MHz 8.83 MHz 6.53 MHz
Change-Id: I851733a8a5824b61feb363a173091bc7e6629b58
Implicit promotion of integer literals to unsigned long introduced a subtle bug
on 64-bit systems due to weird sign extensions (leads to audible glitches in a
few files). The table is originally designed for unsigned 32bit integers, and
it works with those so use them. As a consequence the lookup table size is
halved as well.
Change-Id: I35d878d6df03300387f0e403e0f3c3bdc73eea00
This complements offset-based resume and playback start funcionality.
The implementation is global on both HWCODEC and SWCODEC.
Basically, if either the specified elapsed or offset are non-zero,
it indicates a mid-track resume.
To resume by time only, set elapsed to nonzero and offset to zero.
To resume by offset only, set offset to nonzero and elapsed to zero.
Which one the codec uses and which has priority is up to the codec;
however, using an elapsed time covers more cases:
* Codecs not able to use an offset such as VGM or other atomic
formats
* Starting playback at a nonzero elapsed time from a source that
contains no offset, such as a cuesheet
The change re-versions pretty much everything from tagcache to nvram.
Change-Id: Ic7aebb24e99a03ae99585c5e236eba960d163f38
Reviewed-on: http://gerrit.rockbox.org/516
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested: Michael Sevakis <jethead71@rockbox.org>
This is an improvement to the current compressor which I have added
to my own Sansa Fuze V2 build. I am submitting here in case others
find it interesting.
Features added to the existing compressor:
Attack, Look-ahead, Sidechain Filtering.
Exponential attack and release characteristic response.
Benefits from adding missing features:
Attack:
Preserve perceived "brightness" of tone by letting onset transients
come through at a higher level than the rest of the compressed program
material.
Look-ahead:
With Attack comes clipping on the leading several cycles of a transient
onset. With look-ahead function, this can be pre-emptively mitigated with
a slower gain change (less distortion). Look-ahead limiting is implemented
to prevent clipping while keeping gain change ramp to an interval near 3ms
instead of instant attack.
The existing compressor implementation distorts the leading edge of a
transient by causing instant gain change, resulting in log() distortion.
This sounds "woofy" to me.
Exponential Attack/Release:
eMore natural sounding. On attack, this is a true straight line of 10dB per
attack interval. Release is a little different, however, sounds natural as
an analog compressor.
Sidechain Filtering:
Mild high-pass filter reduces response to low frequency onsets. For example,
a hard kick drum is less likely to make the whole of the program material
appear to fade in and out. Combined with a moderate attack time, such a
transient will ride through with minimal audible artifact.
Overall these changes make dynamic music sound more "open", more natural. The
goal of a compressor is to make dyanamic music sound louder without necessarily
sounding as though it has been compressed. I believe these changes come closer to this goal.
Enjoy. If not, I am enjoying it
Change-Id: I664eace546c364b815b4dc9ed4a72849231a0eb2
Reviewed-on: http://gerrit.rockbox.org/626
Tested: Purling Nayuki <cyq.yzfl@gmail.com>
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
As comment in code states:
"It is possible for our seek to land in the middle of audio
data that looks exactly like a frame header from a future
version of an encoder. When that happens, frame_sync() will
return false. But there is a remote possibility that it is
properly synced at such a "future-codec frame", so to make sure,
we wait to see several "unparseable" errors in a row before
bailing out."
Currently we wait for 10 "unparseable" errors. libFLAC waits for 20.
But I've got a valid flac+cue, wherein switching to certain track
gave me 24 "unparsaeable" errors. Therefore I increased
unparseable_count to 30.
Change-Id: I4e97a5385c729adf3d5075d41ea312622c69e548
Reviewed-on: http://gerrit.rockbox.org/658
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
Reviewed-by: Boris Gjenero <boris.gjenero@gmail.com>
Tested-by: Andrew Ryabinin <ryabinin.a.a@gmail.com>
Reviewed-by: Andrew Ryabinin <ryabinin.a.a@gmail.com>
Although Linux accepts several implicit definitions of SEEK_END found in
stdio.h, the compiler on FreeBSD won't. Rockbox compilation will fail
without stdio.h included.
There is a precedent for including this header, see
lib/rbcodec/codecs/libtremor/ivorbisfile.h.
Change-Id: I58510101b59a354cd6601cb3f323f385a824d2e8
Reviewed-on: http://gerrit.rockbox.org/639
Tested-by: Kevin Zheng <kevinz5000@gmail.com>
Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
This enables the encoders - i.e. to record audio -
to be loaded also on the simulator.
Change-Id: I54fdbeb75b89023c0d7824a34cf76301c02c3150
Reviewed-on: http://gerrit.rockbox.org/632
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Sync opus codec to upstream commit
02fed471a4568852d6618e041c4f2af0d7730ee2 (August 30 2013)
This brings in a lot of optimizations but also makes the diff
between our codec and the upstream much smaller as most of our
optimizations have been upstreamed or supeceded.
Speedups across the board for CELT mode files:
64kbps 128kbps
H300 9.82MHz 15.48MHz
c200 4.86MHz 9.63MHz
fuze v1 10.32MHz 15.92MHz
For the silk mode test file (16kbps) arm targets get a speedup
of about 2MHz while the H300 is 7.8MHz slower, likely because it's
now using the pseudostack more rather than the real stack which
is in iram. Patches to get around that are upcomming.
Change-Id: Ifecf963e461c51ac42e09dac1e91bc4bc3b12fa3
Instead of providing yet another memory allocator implementation
use tlsf and simply link tlsf library.
Another small improvement is to *grow* memory pool by grabbing
audiobuffer instead of just switching to use audiobuf exclusively.
Tested with simple lua 'memory eater' script.
This patch extends tlsf lib slightly. You can provide
void *get_new_area(size_t * size) function which will override
weak dummy implementation provided in lib itself. This allows to
automaticaly initialize memory pool as well as grow memory
pool if needed (for example grab audiobuffer when pluginbuffer
is exhaused).
Change-Id: I841af6b6b5bbbf546c14cbf139a7723fbb982f1b
codec makefiles larger freedom in what they can do to it.
Use this in libopus to prepend the libopus searchpaths to
CODECFLAGS so that its internal config.h will be picked up before
our global one. This avoids having to do a s/config.h/opus_config.h/
when syncing which will be handy soon.
Change-Id: I018d729aa0c8300fa3149f22a5a8c5668b339dfa
Reviewed-on: http://gerrit.rockbox.org/496
Reviewed-by: Nils Wallménius <nils@rockbox.org>
The quickscreen calls settings_apply() and the crossfeed code wasn't
checking that the right crossfeed was set before updating the filter
for the custom setting, which was overwriting the Meier crossfeed
data (custom and Meier share the same data space).
Change-Id: Ifaa2f46fe062d4497681a2dd0d5068ec906c96a3
Distractions make logic fail. It only needs one more loop and should
not trigger further compression cycles after not feeding more data.
Change-Id: Ie0dbb34af92e0ca5718480dd4ab4719a141717ff
For mp3_enc, split encoding duties between COP and CPU.
For wavpack_enc, simply run the encoding on COP (splitting that one
needs more consideration) which keeps the it and the UI from running
on the same core.
As a result, at least they are now useable on PP at "normal" sample
rates.
mp3_enc in all this gets an extensive renovation and some optimizations
for speed, to reduce IRAM requirements and remove unneeded stuff.
Change-Id: I215578dbe36f14e516b05a5ca70880eb01ca0ec2